Изолента синяя😂💪. Обычной ниткой достаточно👍

Awesome. Need to repack my exhaust and your video helps a lot. Thanks, Daniel!

Really good thanks

That was super helpful. I will subscribe to show my appreciation!

@DanMX2112

3 жыл бұрын

Thanks man, i really appreciate it! Have a great Thanksgiving!

Thanks for making this video! I have a LONG Husaberg exhaust to repack.

@DanMX2112

3 жыл бұрын

Your welcome, glad I could help! Good luck with the repack and please share the video!

Thank you so much! That was super helpful!

@DanMX2112

4 ай бұрын

Thanks for watching and I’m glad it helped you!

Great video thank you so much man 👍

@DanMX2112

3 жыл бұрын

Your welcome my man, thanks for watching and please share it with others!!!

Very helpful thank you

@DanMX2112

3 жыл бұрын

Thanks for watching, I appreciate it!!!

Very helpful thanks mate

@DanMX2112

2 ай бұрын

Thank you!

Great video brother helped out a lot.👍

@DanMX2112

3 жыл бұрын

Glad it helps, that’s the goal! Thanks for watching man!

Awesome video

@DanMX2112

2 жыл бұрын

Thanks Robert, glad you enjoyed it!!!

nice video repacking my big gun for the first time

@DanMX2112

Жыл бұрын

Heck ya, thanks man and good luck on the big gun. Those pipes are throaty!!!

I done the exact same thing riveting my exhaust and scratched it on the first rivett 😭 Great video though, really useful!

@DanMX2112

4 жыл бұрын

Lol that thing almost shot me in the eye!!! Thanks for watching!

Great video. Wish you would have done a before and after for the sound

@DanMX2112

2 жыл бұрын

I know me too, but it wasn’t my bike!

The old wire wheel works great for cleaning up internal and external parts of muffler.

@DanMX2112

11 ай бұрын

For sure, and man that is a nasty job. 2 stroke silencers are the worst.

Good video mate ! Will gone help me a lot ! Can you tell what kind of tape did you use there ?

@DanMX2112

3 жыл бұрын

Just regular masking tape used for painting. It melts easy and comes out on the next job. Thanks for watching I appreciate you Lulian!

What size rivets would you reccomend? Do i need steel ones? Or will aluminium do?

@DanMX2112

2 жыл бұрын

I think either will work, but steel is what was came out. And I think they are 3/16” rivets but I can’t remember?

I have an old white brothers e series for my 426 bit the baffle is busted off so it rattles. Not sure how to fix the baffle or if packing will hold it in place?

@DanMX2112

2 жыл бұрын

No, if the baffle is broken then it needs to be re-welded on. The packing will keep it somewhat centered but it’ll just end up doing the same thing in a very short period. Thanks for watching my friend!!!

Quick question wouldn’t you want to use the silicone in between the two pieces, not just at the edge of the connection?

@DanMX2112

3 жыл бұрын

I really don’t think it matters, as the sealant is not there to hold pressure. From the factory they just bead the edge to help with exhaust blow by, otherwise it would turn black and look bad. Again it’s not fro pressure, but just to seal back blow by. When you do seal both opposing pieces, you make it very difficult to separate the two, and don’t really accomplish much more in the fact of closing the exhaust up. Hope this helps, and thanks for watching Thomas!!!

@Fixin2Ride-Official-

3 жыл бұрын

Technically Speaking, Yes! He should have. Looks like the packaging even stated that. Also Shows a Picture at the bottom of the instructions on the bag of sealant being applied to the end cap rim that inserts into the muffler bore while the end cap is still out of the muffler a bit. "Step 10. Reassemble the muffler by tucking in the fresh packing material as you slide the core into the canister. BEFORE the front end cap is INSERTED, apply a thin bead of High Temp Silicone around the end cap for an improved seal. Be sure the inner core of the muffler aligns with the rear end cap before fully inserting the front end cap into the canister (Fig. 5). www.fmfracing.com/content/instructions/000362.pdf

@DanMX2112

3 жыл бұрын

Nice! I do remember reading that, and took the route of doing the bead afterward. Good info and I think either way is fine. Thanks Andrew, I appreciate the comment man!!

Hey mine has this extra mesh around the tube in the Packing should not be in there could possibly be making it louder because it is very loud

@DanMX2112

3 жыл бұрын

some exhausts come with the mesh, but your new packing more than likely will not unless it is oem.

Hey, can you show how to replace only the end cap while the exhaust in attached ?

@DanMX2112

2 жыл бұрын

Everything you need regarding that is In this video, unless your talking about the spark arrestor, as this one does not have one.

Where can I buy rivets ? I need ones to fit the stock exhaust to a 2003 rm 125

@DanMX2112

2 жыл бұрын

Anywhere hardware store or online. They are very universal so don’t think that you need OEM rivets, you won’t find any. Buy the match to the ones you drill out.

So the packing needs to be replaced yet the mufflers are riveted to gather? What kind on design is that? Then there is the issue or spark arrestors. How are sparks going to get through all that junk?

@DanMX2112

2 жыл бұрын

So the packing is there to add back pressure and silence the exhaust. This exhaust has no spark arrestor, therefore is literally fire breathing lol the inner exhaust tube is open and that is how the sparks travel through. The rivets are there for replacement purposes as shown in the video. Good stuff brother! Thanks for watching man!

I’m doing mine on my 08 yz450 and got it apart and wondering what is on the other side of cap. Is there more packing behind there? Thx

@grantdorcey8053

Жыл бұрын

I think 08 muffler is different than yours

@DanMX2112

Жыл бұрын

The 08 is shorter, and no there is nothing behind the cap. Thanks for watching and good luck Grant!

@grantdorcey8053

Жыл бұрын

@@DanMX2112 thx you

Is that painters tape you put around the wrap? Did you leave it? It won’t catch fire?

@DanMX2112

2 жыл бұрын

Yes sir, just painters tape. It won’t catch fire, it’s all good, been using it for years.

@mrcla55yguy20

2 жыл бұрын

@@DanMX2112 lol that’s awesome. Thanks for the swift reply. Saw it at work earlier. I’ll use it.

I did mine. First run the exhaust was smoking when I stopped. That normal for new packing?

@DanMX2112

3 жыл бұрын

Usually had a slight smell and smoke to it, normal and no big deal!

@seanpotter4943

3 жыл бұрын

@@DanMX2112 yeah was thinking that. Wasn't panicking just wondering. It wasn't an engine Smell pure burning . Thanks bud

@DanMX2112

3 жыл бұрын

Heck yeah man thanks for watching!

Do you have to have the rivet tool to do it

@DanMX2112

3 жыл бұрын

Otis Garrigan some people use self tapping screws, but either way works. The river tool will hold up, screws will back out eventually. Check my link in the description below and pick up the tool for cheap! Thanks for watching!

Does crf150 have this ?

@DanMX2112

3 жыл бұрын

Yes, it has replaceable packing in the silencer!

if u take all the packing will it blow up

@DanMX2112

3 жыл бұрын

The only reason for the tape is to hold the packing together until you slide it in the silencer. That’s it, just do as I did in the video and you’ll be fine.

Is the packing just fiberglass?

@DanMX2112

Жыл бұрын

Yes sir!

Wrapping it too tight or loose hinders performance.

@DanMX2112

10 ай бұрын

Yes sir, it’s can’t be so compressed it’s solid. Good point, thanks for sharing!

You never mentioned what you used the popcorn for?

@DanMX2112

3 жыл бұрын

Haha 😂 to remain sane! That’s awesome, I’ll be more specific in the future lol thanks Adam!

how was the sound before and after?

@DanMX2112

4 жыл бұрын

Alvaro MASTER Beas it sounded like a pop can before. Now it sounds deep and low like it should lol I didn’t get a before sound so really had nothing to compare.

@elsuarze7

4 жыл бұрын

@@DanMX2112 great job!!!

What size rivets did you use?

@DanMX2112

Жыл бұрын

I’m thinking they had to have been 3/16”. I had a kit with different sizes. Whatever hole you drill use that size of rivet.

@turboflash_

Жыл бұрын

@@DanMX2112 ok thank you very much.

before and after sound would have been nice :D

@DanMX2112

3 жыл бұрын

I would have, but never got footage of before. The after sound is on the Lake Murray Ride video. Check that out! Thanks for watching brother!

Good video next time turn the music down thanks man!!

@DanMX2112

3 жыл бұрын

Noted!

Took about 6 hours longer then your video. Next time will be better. Thanks for the video

@DanMX2112

3 жыл бұрын

It’s all fun the first time lol I know how it is my man! Thanks for watching!

Seriously? Your camera died JUST at that moment huh? How many roll around the baffle do you need to do? One, two or more?

@DanMX2112

9 ай бұрын

Dude, if you had any idea how many times the camera has died during something important lol it never has happened on an easy step, except in this video. Roll it loosely till it’s slightly larger than the inside diameter of the pipe, not rocket science my guy. Thanks for watching!

They make it look easy it is not at all mine took days to get off following the utube videos. Ended up using razor blade to cut silicone from underneath the can and a punch to drive the can off. Repacking not easy either always bunching up trying to put back on can and lining up holes don't forget the red silocone either

@DanMX2112

Жыл бұрын

Dude my first one was a nightmare, and some are very stuck. Glad you got done and I hope the video helped out! Thanks for watching!

Bit disappointed the camera died I like point to point videos but that’s alright.

@DanMX2112

2 жыл бұрын

Me too, I was bummed out bad!

Why not buy an upgraded muffler?

@DanMX2112

2 жыл бұрын

Lol I wish, and no need. $30 for packing or $200 for upgrade, stock works fine 😛 Nobody but the pros even use all that 450 power to justify it. Thanks Gary, I appreciate you watching!

You don't even need the band's.

@DanMX2112

3 жыл бұрын

Yamaha did, so I went with it. No biggie.

I proved, why HRC | KTM = "Can replace - any core(kor)!" Used - racist "Swap Moto - sound!" And he, illegally - used our prosuct: "On a public - domain?" I.e. Oriental radar! 2nd Amend - "No personal Venue!" Only - chosen mechanics - from our: "Shop can - do demonstrate!"

@DanMX2112

5 ай бұрын

Who takes the time for this ⬆️

@idecidenotyou

3 ай бұрын

I agree.. this dudes got daddy issues..​@@DanMX2112