This was a great video! Only issue was I broke the piston using pliers trying to remove the valve cap (the black thing). I ended up using a small flathead screwdriver to pry apart the valve cup. I attached the straw to the broken piston with plumber thread seal tape. THANKS to your video, my spray bottle sprays again!

Well it helped me to understand the assembly of Aerosol 😁 Thanks for the video 😇

Thank you 🎉 fixed my Gardenia spray bottle.

It works thank you so much!

Thank you for the informative video. The manufacturers design the bottles to fail by the time the contents are empty. WASTE of plastic...If you can keep these working, it saves you money and saves waste in the landfills.

@xVoLAnD

4 ай бұрын

Thank you, yes that is one of the things I do with old things. A lot of old things are entitled to a second life

Always have that kind of problem with some spraying detergent bottles. They don't work after sometime which is pretty annoying. And also I have perfume bottle, the spraying part is faulty. If only that can be repaired. Thanks for the video. Really helpful.

@xVoLAnD

Жыл бұрын

Thank you, for your comment!

This helped! Thank you

Muchas gracias!!

It worked Thank you 😊

Thanks to you I mnaged to fix my spray nozzle head 👌👌👌

Thank you for this video

I didn’t expect the fix to be so difficult

@LuisRodriguez-zb8wf

Жыл бұрын

It is not that difficult, the author of the video simply does NOT know how to do it, it is extremely simple

@kartusmoon4264

9 ай бұрын

@LuisRodriguez-zb8wf Then film and post if that's true

@vrijevoeten

3 ай бұрын

@@LuisRodriguez-zb8wf Please elaborate!

@davedaves3489

Ай бұрын

Its not i bet you didnt even try it.

Thank you so much

Excelente!!!! Muchas gracias!!! Saludos desde Argentina!!

@xVoLAnD

9 ай бұрын

¡Gracias! ¡Hola desde Ucrania!

*Esse americano está detonando o pulverizador. Quero ver ele montando novamente 😂kkk*

@xVoLAnD

14 күн бұрын

É necessário subscrever para ver isto novamente

Are you kidding me it's so tough that even you are struggling.

@xVoLAnD

11 ай бұрын

It's easier than it looks

@sauravdey2266

11 ай бұрын

Nope not that easy i tried.

@hamhumtube

9 ай бұрын

It was easy just need to be patient and enthusiastic

@sauravdey2266

9 ай бұрын

The nozzle itself is hard to open it's like it's being glued though it's not. And with patience and enthusiasm u cn even build a house. The process is easy theoretically but practically not so much. See the video , the man in the video himself is struggling so much.

tnx

its pretty unique problem you fixed, thanks for the video!

@xVoLAnD

2 жыл бұрын

Oh, sure. That's why this video is here. Thank you!

Informative

Nice video

I put a like citic acid product and Worked! Without even opening anything!

Thank you very much. You have made me very happy🥳☺

@xVoLAnD

3 ай бұрын

You are welcome!

I just like you technique

@xVoLAnD

2 жыл бұрын

Thank you!

THANK you SO MUCH!!! This is a problem that has been PLAGUING me my whole life, and bothers me to no end- I just bought a brand new spray bottle that was dribbling all over my hand, /after/ I'd spent about an hour labelling and preparing it for work. Oof. Thank you for my life!!!!

@xVoLAnD

Жыл бұрын

You are welcome! 👍🏻

@TheKomentor

7 ай бұрын

You can also buy and keep spare nozzles/guns (without the bottle) and maybe clean the spoilt nozzles when you find time.

Lo intenté pero en mi aerosol todas las partes estan pegadas desde la cubierta! todo!!

I tapped the nozzle a couple of times on worktop it started to work. Thanks to this video I learnt that valve needed freeing so usually a tap does the trick. Haven't tried but I suspect if leave nozzle in hot water 5minutes clears and frees nozzle.

@xVoLAnD

22 күн бұрын

Congratulations! Often, the ceramic ball inside sticks and this helps

Guys if it still doesn't work or the suction is weak u can still use it just you can only use it remove the straw or what you guys want to call it, put it up side down and it will still spray but its just more weird

I 'll buy another one.

thank-you

Man took the whole thing apart 💀

Great video.

@xVoLAnD

Ай бұрын

Glad you enjoyed it. Thanks!

@davedaves3489

Ай бұрын

@@xVoLAnD it was EXTREMELY helpful. Thank you. Great narration. Simple and to the point.

Super! Ukrainian people can fix everything 👌🏽😃 Great!

@xVoLAnD

Жыл бұрын

Sorry, but I'm not ruSSian. *I'm Ukrainian.* Therefore, it sounds like an insult, I'm sorry

@maggyliciousss

Жыл бұрын

@@xVoLAnD oops im very sorry🫣 I didnt mean it in a bad way, u just sound like a friend Im very sorry 🙏🏽

@xVoLAnD

Жыл бұрын

@@maggyliciousss The fact is that most of the achievements that ruSSia boasts of were made by Ukrainians. Just before, the Ukrainians didn’t attach any importance to this, but now - it’s important.

@maggyliciousss

Жыл бұрын

@@xVoLAnD ok , i totally understand you im gonna change it up real quick for you 😃 (By the way, i respect every person, no matter where he from, because pride is something that can destroy so many things in life)

@xVoLAnD

Жыл бұрын

@@maggyliciousss Sorry, if you heard some kind of pride in my words, but for me this is justice.

Gr8 video, putting finger at the nozzle and then trying also works, it creates vacuum and the pulls the water

@xVoLAnD

11 ай бұрын

Yes, you are right, but if there is an air leak, it won't work.

Bueno, me funciona un pequeño truco... Por dónde sale el agua a presión soplo fuerte, activo el disparador y la manguera debe hacer burbujas en el agua..y listo

@xVoLAnD

3 ай бұрын

Si no presuriza el interior, no funcionará. Entonces tienes una fuga de aire.

well, it certainly was an honest video…

Why you cut the nozzle part?? I still don't know how to remove the nozzle.

@xVoLAnD

5 ай бұрын

At 6:02 you can see that I didn't cut anything off. It's hard to get it off.

@shal7501

5 ай бұрын

​@@xVoLAnD when I said "cut", I was referring to the video, not an actual physical cut. You didn't show how to remove it.

@xVoLAnD

5 ай бұрын

@@shal7501 I understand. I did it behind the scenes, sorry. It's snap off

Sorry you did it correct. But, simply squeeze the bottle 2-3 times hard, and done...😎

@xVoLAnD

Жыл бұрын

I don't think it helps because the system has a leak and doesn't create pressure inside

@avimango46

Жыл бұрын

My spray bottle gets choked after putting the outer cap?

No, realmente no es difícil, tan solo un poco d iniciativa y lo logras...

@xVoLAnD

3 ай бұрын

Sí, tienes razón.

How to fix it back?

@xVoLAnD

10 ай бұрын

Do the same steps in reverse order

I was hoping for an easy fix 😞😞😥

All parts made of plastics ,I could not understand you should stand step by step

বুঝলামনা!! কতক্ষণ এদিক, কতক্ষণ ওদিক চেষ্টা করছে।

All you need to do is squeeze the bottle to push the liquid up the tube/straw and you'll find it spraying again

@gardnerberry113

10 ай бұрын

I tried that on one of those high-dollar Zep bottles and it responded by leaking (heavily) around the trigger with every pump. I guess I'll use the el cheapos down at Dollar Tree. 😏

@sangre3

9 ай бұрын

No porque estaba tapado con Algo gomoso... No lo podia sacar hasta que lo abri y lo removing manualmente...

too much work

Not working

@xVoLAnD

2 ай бұрын

It always works. Check for air leaks. The inside must be pressurized.

@tatheerkhan351

2 ай бұрын

@@xVoLAnD I'm not understanding what to do with this... I opened every part cleaned it, fixed it back but condition is same..

@xVoLAnD

2 ай бұрын

@@tatheerkhan351 The basic idea, is to create internal pressure, resulting in fluid escaping during pressing. Check all components for free movement (e.g. ceramic/plastic ball inside). This will work.

@tatheerkhan351

2 ай бұрын

@@xVoLAnD kindly do this for me .. I'm done with this ... Btw m surprised that u replying 😊

@xVoLAnD

2 ай бұрын

@@tatheerkhan351 I'm responding because I'm confident it works. Every video I make is made to solve problems. All right, let's get this over with.

Just throw it away n get a new one. It's not worth all of that

@xVoLAnD

5 ай бұрын

Yes you are right, unless you are interested in how it works and applying your knowledge to other areas

Effort more but less like or subscriber

It is not that difficult, the author of the video simply does NOT know how to do it, it is extremely simple

@xVoLAnD

Жыл бұрын

Really? What don't I know? Why don't create video and show everybody how to solve a like this problem more easily?

@brrjohnson8131

10 ай бұрын

I've never managed to pull this section out. If it's so easy you must have a trick you could share? Or you've got nothing.

To disarm simply with dynamite, when we cannot do the simplest things

Thank you so much , it really works