Finally a video explaining exactly what I needed to know and the perfect type replacement hose connector!! Thanks for the video and showing step by step instructions! U have no idea how many terrible videos people make and just wasted time!

@MirandaDetailing

6 ай бұрын

Thanks so much. I’m glad it helped!

@skojo518

5 ай бұрын

@@MirandaDetailingJust watching this video - well made! Gotta ask…now that the video is 4 years old, how long did the hose replacement part last? Thanks again for a great video

This is such a valuable video

Thank you for your videos

You just saved me $35..... thanks partner!

You Rock! Thank you!

Thanks AMIGO!

Thank you for your appreciation. First, I must say that listening to your voice makes me feel that this guy has a great attitude in life and that your heart is in the right place because you sincerely wish to help people out by making this video. I have used these fittings before and they are extremely hard to get it right, on a thicker rubber hose like the one you have here because they are being extremely squeezed. It is far better to not screw the screw in all the way when it comes to the point of pushing out the hose. Look, I am sure you have given it some thought about why this has happened (I am referring to the damage done to the hose) What has happened is where we see that tear a considerable amount around the hose, if you could bisect that brass fitting you would see that all that outside layer of rubber has been completely peeled off the entire area of the hose all the way to the end, that connection has been completely compromised, only the inside ribs of the fitting are holding the area that has been damage the outside ribs of the fitting are not holding anything it has been peeled off. For these thicker hoses the only way possible to be able to screw it all the way in and it is still quite difficult but it must be put in a vise and as the joint is being tightened it must be watched very carefully and once and if when seeing the hose is just starting to squeeze out go NO further. Hope this helps.

@MirandaDetailing

2 жыл бұрын

Hi. Thanks so much! Yeah very good points! It’s not a perfect fix, but I’ve had it on here for a few years now and the hose is so worn and weather check anyway. I say keep these as a quick fix as a back up, but for mobile guys the hoses get so much usage over the year it’s better just to replace it when it gets worn and cracked like this. Thanks for those great pointers! 😎👍🏼

@markthompsoncpa

Жыл бұрын

I have tried this fitting and the slight damage done to the exterior of hose is not relevant, just cosmetic.

Thank you. I will try to repair the hose instead of throwing it out....

Happened to me also, it was a cheap harbor freight hose I’ve had for years I just bought a new one.

always wondered how those things went on now I know. I need a 1/4 for my porter cable air line that's leaking that snake hiss gets annoying after awhile☺

nice...have you tried to first use insulating tape to avoid ruin the outiside? and you could use a heat shrink rubber on the joint outside when you finished! also try some 303 protectant rounds inside/out :)

@MirandaDetailing

5 жыл бұрын

Good tips! Thanks.

The thread is reverse thread attaching to hose if I am not mistaken

Will you please make a video on how to repair a damaged extension cord?

@MirandaDetailing

2 жыл бұрын

Hi. Well actually I found this video and used it myself. kzread.info/dash/bejne/X3qrqZSslseycbw.html

Hello, thanks for your useful video, can you please give us the link from where to buy this fittings. thanks again.

@MirandaDetailing

4 жыл бұрын

Hi Links are in the description...but I will put them here also, 3/8 Hose Repair amzn.to/2ZXX9vM 1/4 Hose Repair amzn.to/2PM1kWS

Hello, how long last the repair??? Thank you for your videos

@MirandaDetailing

Жыл бұрын

It lasted until I sold the trailer a few years later.

Where and how do you drain out your air compressor inside the garage now does a bunch of rust come out ?

@MirandaDetailing

2 жыл бұрын

I bring it out to the driveway to empty the tank. Try at way I don’t get rusty water.

The damage would be mitigated if you had used the dish-soap, you had allowed the hose to slip out of the sleeve while tightening the bolt, you must not let hose slip or the hose will slip outward on those threads and they will rip off the out layer which in turn will weaken the hose and with use because of the flexing of that area the hose will give out.

@MirandaDetailing

4 жыл бұрын

Excellent tips!! Thanks!

it worked for the most part, but now there's a very small leak coming from between my gun and the adapter. What would you recommend to seal that small gap?

@MirandaDetailing

3 жыл бұрын

mmmmm. could be an o-ring in the female quick connects.

in using the hose you get wear and twear should t you clean and protect the hose or is t not necessary

@MirandaDetailing

5 жыл бұрын

You can clean and protect it if you want. It I find it unnecessary.

How do you repair the other end, thats connected to the compressor? Thanks!

@MirandaDetailing

2 ай бұрын

Hi. I’ve never had to repair those ends because they usually don’t break. But I found this. www.temu.com/1pc-premium-solid-brass-pneumatics-reusable-hose-end-repair-fitting-1-4-barb-for-1-4-inch-id-polyurethane-air-hose-with-1-4-npt-rigid-replacement-g-601099519699424.html?_x_sessn_id=cee21561gd&refer_page_name=bgn_verification&refer_page_id=10017_1715341732876_omqqbqxdzy&refer_page_sn=10017

@Here12years

2 ай бұрын

​@@MirandaDetailingthanks!

What is the part that you've used to repair the hose called? I can't find the link mentioned.

@MirandaDetailing

2 жыл бұрын

Hi. It’s right in the top of the description but I’ll put it here also. 3/8 Hose Repair amzn.to/2ZXX9vM 1/4 Hose Repair amzn.to/2PM1kWS

To thread the inner part it really helps to put dish soap on the threads.

Or you visit a parker store and buy some push lock fittings. They are barb fittings with a seal at the end made for a rubber hose like that that are rated for 350PSI. No clamps, no ferals and no sleeve to thread into

@MirandaDetailing

4 жыл бұрын

Really?! That’s so cool. I’ll check it out! Thanks!

@johnnytacokleinschmidt515

4 жыл бұрын

I think push lock hose must be used with the fittings.

So what’s the screw name. ???anybody can tell please

@MirandaDetailing

5 ай бұрын

Hi. The links are in the description.

🤩🤩

where can I get these repair parts. thank you

@MirandaDetailing

2 жыл бұрын

Hi. They should be in the description of the video

What’s the name of the part used

@MirandaDetailing

8 ай бұрын

Hi. I have links in the description. But I’ll put them here also 3/8 Hose Repair amzn.to/2ZXX9vM 1/4 Hose Repair amzn.to/2PM1kWS

@ughsimran

8 ай бұрын

@@MirandaDetailingDang thank you so much

@MirandaDetailing

8 ай бұрын

@ugh_simran you’re welcome

What's the max PSI for it?? I run my impact at 120 PSI....

@MirandaDetailing

11 ай бұрын

Hi. If you click on the links they tell you in the description of the product that it is rated up to 250psi.

No links to this product can I find, out of production maybe??

@MirandaDetailing

4 ай бұрын

Hi. The links are right in the description below the video. Bruno will put them here also for you. 3/8 Hose Repair amzn.to/2ZXX9vM 1/4 Hose Repair amzn.to/2PM1kWS

@Arbe1945

4 ай бұрын

Sorry but that Amazon page/link does not show the repair brass unit that was used in the video. @@MirandaDetailing

@MirandaDetailing

4 ай бұрын

When I click on them both it shows up for me. Are you in the US?

@MirandaDetailing

4 ай бұрын

See if these new links work amzn.to/3wXUN55

May I ask what kind of wall hangers your using for those spray bottles

@MirandaDetailing

4 жыл бұрын

Sure thing. Here ya go amzn.to/2YNgEsv

Can I replace the other end of the hose the same way ? I bought the fitting , but my hose broke at the other end , can I use it the same way ? Thank you.

@MirandaDetailing

3 жыл бұрын

Actually I’m not sure. I only used the Mae end for the end of the hose. They make asp make a female repair end but I haven’t checked.

No tape on the threads?

@MirandaDetailing

Жыл бұрын

Hi. Nope...Not on those threads, only on the metal on metal parts.

Where is the link

@MirandaDetailing

Жыл бұрын

Hi. It’s in the description of the video. But I’ll put it here for you also. 3/8 Hose Repair amzn.to/2ZXX9vM 1/4 Hose Repair amzn.to/2PM1kWS

No change same page, no unit for repair.

@MirandaDetailing

4 ай бұрын

The only reason I can think of is that you’re not in the US. Search “Dixon BN32RU62 Brass Reusable Fitting, Adapter, 1/4" NPTF Male x 3/8" Hose ID, 5/8" Hose OD” The links are definitely working, but they may not if people are in different countries.

Here’s “official” install video: kzread.info/dash/bejne/ZYpptsewfJqZac4.html They say turn it 3 rotations in, and back it out 1 rotation to keep the stress out of it. I bought what they said would fit a 3/8” line, it did NOT slip over the outside like the one in their video.....

@MirandaDetailing

3 жыл бұрын

Cool thanks,,,,The way I did it still worked great, In fact I did it a couple of times becaseu this hose is getting brittle and kept popping on me and I had to keep shortening it by a foot or so, but this is good to know! Thanks for sharing!

but my hose has a male end where it leaks

@MirandaDetailing

2 жыл бұрын

Aw that stinks. You should be able to repair it the same way and use this end to attach it amzn.to/3xfw8Fm

wanted to ask you your thoughts please I tried to use a 1/8 hose repair kit with barb type it seemed that the barb was loose before I was going to panic I tried as a remedy wrapping teflon tape around the barb before I put a clamp it seems it became secure and does not come apart after I put the teflon tape and got it clampped ?? Ideas please thank you !!!!

@MirandaDetailing

7 ай бұрын

Hi. Oh that’s weird. It should be loose at all. This repair kit really clamps down on the hose and makes for a really tight fit. Are you sure you got the right size?

@Fredengle

7 ай бұрын

thank you for your response in case I was unclear I got the old style barb type the one in the above video is a newer version !

The Dixon instruction video doesn't show a screwing of the ferrule onto the hose. Rather it shows a slip fitting. When you screw the adapter in it locks the hose in the ferrule. Perhaps it doesn't matter but for those who find that the ferrule they ordered is just a slip fitting over the hose, there's no need to return it for a smaller (screw on) size. When the 11/16 ferrule I ordered was a slipfit over my 11/16 od hose I thought I had ordered the wrong one (based on this video) and was going to return it. Fortunately I found the Dixon video.

@MirandaDetailing

3 жыл бұрын

Hi What do mean by the wrong size? Can you share the video you are talking about? Are there two different types of fittings, a threaded one and a slip fit? Because I only found the threaded option and the hose had to be threaded in to fit. I also bought the wrong size at first, the 1/4 one, which was very obviously the wrong size. Then when I got the 3/8 it fit perfectly, it just needed to be threaded in. It still works to this day.

@jerseyjim9092

3 жыл бұрын

@@MirandaDetailing If you search Dixon Procedure 2305 the video should come up. The way its described on there is that the threads inside the ferrule aren't so it can be screwed onto the hose but rather they grip the hose as the adapter is screwed in. My 11/16 hose fit perfectly inside the 11/16 fitting . If I had purchased the 5/8 fitting I would've had to screw it on as you did which apparently works fine too. Who knows, maybe it's even stronger. I'm just glad I didn't have to return mine for a different size.

@MirandaDetailing

3 жыл бұрын

Oh I see. Ok cool. Yeah I saw it. I guess I had the threaded versions I bought on Amazon. Thanks for sharing.

Did you ever experience ANY problems whatsoever?

@MirandaDetailing

2 жыл бұрын

Hi. What do you mean by any problems? I have had it thread incorrectly once and had to start over. That’s about it.

@Baileys.small.engine.repair

2 жыл бұрын

@@MirandaDetailing ok I was just meaning like did it get weak quickly or anything like that

@MirandaDetailing

2 жыл бұрын

Ohhh. No not really. The same as the original fitting. This was on my mobile unit so the heat and sun would eat these hoses up quickly. So I would keep fixing them until I needed to just replace the hose after a year or so.

@Baileys.small.engine.repair

2 жыл бұрын

@@MirandaDetailing ok thank you!

One problem with this video is that connector is referred to as this”. Nowhere are we told what “this” is and where to get one. Not in links below either. In short what is “this”most important part

@MirandaDetailing

Жыл бұрын

What do you mean. I explained everything one needs to do to replace the air hose line. Links are in the description also. For anyone who has an air compressor they know exactly what “this” is. It’s not complicated at all. This video has helps thousands of people. I even had people call me personally and thank me for showing them how to fix “this”. did you have difficulty understanding what I said and showed in the video?