NIce video lad. Sometimes we can't win every fight in life, sadly I lose mine. BUt your video sure gave me power to go down with a good fight. Toaster is dead but memories will live on.

Thanks, my husband left me a text that we needed a new toaster. Your tutorial helped me fix it. 😀

This video was so helpful. Thanks so much. I never would have though the lever not staying down had anything to do with electricity. You explained the inner workings so clearly, and mine is working again.

This was useful and helped me to successfully repair our toaster. However, once the toaster is open, I strongly recommend to clean the electromagnet surface and its metal counterpart as well. In our toaster, there were some greasy bread remains on it which certainly at least weakened the magnetic force. I cleaned it with a bit of isopropyl alcohol. I don't know which of these was the problem after all, just recommend to do both.

@carolinebarbeau2157

2 жыл бұрын

Excellent recommendation! In my case, it was a dirty magnet and not the contacts that was the issue.

@mak1-zen1n

4 ай бұрын

I have a question, rn I’m really young and I don’t know how a toaster operates, I recently just used an toaster and I need help with getting some answers and I’m too scared to tell my parents that the toaster turned off all the power, not all, I am able to use wifi but charging my device is a problem. Does anyone know what happen ? Because when I used the toaster, suddenly the toaster turned off some the power, I searched on google just to find answers of cleaning the toaster or either that the short circuit is tripping (I don’t know what it means), and it could be life threatening to us. I’ve been slightly scared by this problem and I’ve tried unplugging the toaster to see if the electricity will come back, but it won’t. Does anyone know what’s going on?

@metins4324

4 ай бұрын

⁠@@mak1-zen1nYour toaster obviously triggered the fuse to turn off. Unplugging the toaster was good, do not plug it in again. If you know where the fuses are, you can now turn it on again, but leave the toaster unplugged.

Thanks for saving me $20 cause I just about to throw my toaster out to buy a new one. It wasn't touching the contacts and I fixed it. Kudos to you.

Thank you I will take a look and see if this is the problem. And by the way, thank you for getting right to the point not like most other sights talk about everything but the problem.

Just wanted to thank you - we couldn't get the handle off the toaster to allow us to take off the case. Because you mentioned a screw, we found the screw, took off the handle, took off the case and found the small deep crumbs that were preventing the electricity from connecting. Our toaster (different model) lives to toast another day, thanks to you.

Well done - I had to laugh out loud when I realized mine was also magnatized and not a latch... kept looking for the obvious on a $40 toaster... a latch of some kind. Saw something like a magnet but tossed that idea aside.. turns out.. you saved me $40 and more importantly one less piece of plastic in the trash.

Legend. Fixed in a few mins

New viewers need to understand the cord issues shown only test with the plug in the wall socket. The toast carrier will NOT lock down with no power going through the device. Wiggling the cord at the plug or toaster does nothing if the plug isn't in a hot wall socket.

Thank you! First of all, it is interesting to learn the mechanisms. Second, one less toaster un a landfill and one less that I need to purchase.

Whoa, thank you so much for this video. It really saved my toaster's life. Glad I don't need to throw it away.

Very good explanation / demonstration. Thanks Adam!

Amazing! We just repaired our toaster by sanding the contacts. Thank you sir!

Worked like a charm. Thank you!!

Thanks Adam. You hit it right on. Dirty contacts.

Thank you from England. Worked a treat!

Thank you . . . fixed my nearly new toaster by watching your video

Thanks to taking the time and the effort to make this video, From UK

A kniferack fell on my toaster yesterday and somehow broke it. Haven't even had time to open it yet but this video gave a pretty good idea which parts have propable shifted around and caused a faulty connection.

Your system and method worked for me! Thank you for a great video!

Thank you! have a nice day, AdaM

Thank you for your nice 👌 video.

My Monky-Ward toaster died and went on Consumer Reports for a new one. Unfortunately, none of the reviews were positive from broke after two years to uneven heating. So I opened mine up, did some cleaning, adjusted the "color dial" and it came back to life. Gotta be a 40 yr old toaster, ya know, the days before they started putting capacitors in them.

I'm with Ben ... very nice friendly video, Adam. Thanks. Cleaning contacts didn't work for me either, but i enjoyed following your video and trying. Have a terrific day.

Thanks a lot . I just moved the cord around and my toaster is working now . ✌️👍

Also don't forget to check the supply to the socket. I just took my toaster apart, did as the video said, only to find it had tripped the earth leakage breaker. Reset the breaker and the toaster works. Shall monitor, if it does it again it's in the bin. Thanks for the vid.

You sir just saved my family $500 dollars. Caint believe it , thanks a hundred

On my toaster , I had to clean the electromagnet to , once it was cleaned started to work . tank you

Much better than other toaster videos.

Thanks Man!!! Just saved me buying anew Toaster!

You saved my toaster (and my wallet) thank you.

Thanks for the tips. Great video!!!

Thank you!! Saved our toaster 😁

Nice close up. Informative.

Thanks! Solved mu problem. Note that when you first plug it you have to hold it down for a bit to give time for the magnet to magnetize.

It worked for me, thanks 👍🏼

Thanks Adam very helpful, very informative. We have a Hamilton Beach toaster 4 slice both sides are acting up. We haven't gotten the service out of it that I feel we should have for the money. I'm hoping it's something simple like you showed us....thanks again Adam for your info 🙂 And.....remember, God loves you, Adam, and He wants you to love Him too 🙂 Thanks again for your help !

Thank You for explaining :-) Helped me repair my Krups toaster - problem caused by a small piece of bread in the contact.

worked for me. thanks.

Thank you. My toaster stays down but nothing happens. The heat does not come on. Any suggestions?

Excellent video and thank you for sharing 😊🙏 now I know what is the problem with my toaster..

Very useful video! I fixed my toaster by cleaning the connectors. Thank you! :-)

Thanks for every youtubers, watching differents vids, like your, not all systems are same, I could fix my toaster . thnks.

Wow...thank you for the great video! Saved this toaster from the landfill.

@nathanielanderson4843

4 жыл бұрын

noice

Thanks Adam for the video. Just found out that one of the switch contacts is broken in mine. Do you reckon this is replaceable?

Great video! My toaster r is functional again. Gunk on the metal contact just like u said. Thanks

Cool it works. Thank you a lot bro

Hi Adam , my toaster contact is working , but the lever does not stay down and I cannot work it out why ....is a Brevilke model TT 7 Your advice is appreciated....

Thanks. It works for me to clean the copper pieces.

What is the best way to clean the contacts? I tried a dremel with sander, but getting in there is tough. Maybe an emory board?

Thanks sir

When I push down on the lever it pushes two metal tabs out to make contact with the outer tabs that are just barely separated when the lever is released, is this just a switch or does it have anything to do with the amount of time the heat is on? I'm having trouble adjusting the gap.

My taoster cord was the problem, thanks a lot 😊👍

Yeah cleaning the contacts worked, thanks sir :)

Most of these new toasters today need a triwing screwdriver to open them..I dont know who came up with that silly idea !!

Hi great video...I got problem with my hamiltonbeach toaster Type T69 Model no 22456. . my bread wont pop up..they just continue to toast and burn but wont pop up please help

I cannot get the casing off my T-fal TT7061 Avante Deluxe 2-Slice Toaster with Bagel Function! Any hints? (before I can check on the contacts :)

Mine just went BANG and few out a big spark - blowing the fuses on the stove . Was expecting to see black scorch marks when I took it apart but alas nothing …. any ideas ?

Thank you!!! My lever wasn’t going down. Turns out it kicked the bucket. Time for a replacement. Will update when my new toaster gets shipped and delivered from amazon!!♥️

My shed now has 3 toasters in it ..( no time to look see ) and they all have the same complaint ..It only toasts the top part of the bread !!! so its over to you before I clear my shed . Thanks for any help you can give me

You solved my problem

My toaster timer or darkness dial doesn’t seem to be working. It never releases the toast even on the lowest setting. How do I fix that?

좋은 영상에 감사 드립니다. 👍

Thanks for the Info . my problem the unit heats up while pressing the nob it seemed the magnet it is not activated. Any suggestion? Thanks

@carolinebarbeau2157

2 жыл бұрын

You need to clean the magnet and the contacts below. I used an emery board and that did the trick for me, someone else used rubbing alcohol.

How to replace the toaster cord and what size cord?

Hi, how do you change a bulb in a toaster?

Cleaning contacts didn't work. I think I hear arcing, I can't get the handle off and that is making trouble shooting difficult. Useful video.

My toaster won't work it's new rarely used it also can boil eggs and it's not the fuse what else could it be tks

Merci l'ami! Grâce à toi, mon grille-pain est flambant neuf! Normalement, j'en jette un par an.

Our toaster doesn’t go down if there is no bread in the chamber….it’s actually a safety feature.

The rods that the handle slides down got worn and stiff on mine resulting in requiring more pressure needed to lower the bread and that resulted in the handle strut bending and catching on the circuit board before reaching the bottom. Natural tendency was to press even harder which only made the problem worse. Trimming the strut with tin snips helped but replacing handle strut with a better design would have been better. By the time that became apparent the machine was scrap from so much dismantling but will be better prepared next time.

I'm having a problem with it popping back up not going down.

How it's should be opened their below nutbolt or screw

Thank you so much though I'm not winning with mine, it's tripping EL/earth leakage any advice please?

The contact metal generate spark when pulled down. The toaster wires turn red which means electricity is running. however, the toaster does not stay down, indicating electromagnet is not generated. what could be the cause of spark n no magnet hold?

@zekeyoung4255

7 жыл бұрын

1988-Hacksaw Jim Duggan 1989-Big John Studd 1990-Hulk Hogan 1991-Hulk Hogan 1992-Ric Flair 1993-Yokozuna 1994-Lex Luger and Bret Hart 1995-Shawn Michaels 1996-Shawn Michaels 1997-Steve Austin 1998-Steve Austin 1999-Vince McMahon 2000-The Rock 2001-Steve Austin 2002-Triple H 2003-Brock Lesnar 2004-Chris Benoit 2005-Batista 2006-Rey Mysterio 2007-Undertaker 2008-John Cena 2009-Randy Orton 2010-Edge 2011-Alberto Del Rio 2012-Sheamus 2013-John Cena 2014-Batista 2015-Roman Reings 2016-Triple H 2017-Randy Orton

@carolinebarbeau2157

2 жыл бұрын

You need to clean the magnet and the contacts below. I used an emery board.

My toaster is not even broken why am I watching this. Good video though

how do you keep ants out of your toaster ughhh

My toaster is new but the first day it worked next morning I had that problem please help

Oh shoot!! it worked, wiggled a few wires, voila!!

Unfortunately doesn't work for protogens

Hi AdamDIY - great informative not-a-lot-of-crap vid - thank you - my biggest problem is how to find the right tool to unscrew the little (mo_t_er f__king little a--hole screws) tool that unscrews the back/bottom from the unit so I can figure out how to fix it to stay down - I've sprayed them with wd40 3 x's now & got the two off near the cord but it seems like different screws take different size OCTAGONAL toolbits - how did you get the back/bottom off, PLEASE-PLEASE-PLEASE????? oh, please somebody respond - I'm going nutz !!! thanks, thunderhorse_49MMC

@AdamDIY

8 жыл бұрын

+THUNDERHORSE49 mmc There is a trick to making any kind of driver. You melt the end of a Bic pen with a lighter just enough that the plastic is soft and then press it on the head of the screw you want to remove. Then when it cools it is the shape of the screw head. I do that when I dont have the bit I need. You can get a set of bits at home depot.

@youngjuls

6 жыл бұрын

Awesome answer! thank you

@carolinebarbeau2157

2 жыл бұрын

My Black & Decker toaster required a 2.5 hex key for two screws and a Philips for the other two.

You would of thought someone will have invented a toaster that stay down by now because 90% of all toaster problems is the dam lever not staying down

Eu gostaria que fosse traduzido para português não entendi nada

I was gonna fix it until you took the cover off, which I simply, do not have the patience for.

I can never be fixed

I’m saved

Mine only works on one burner on each side. I know I should just buy one, but I just want to f around tbh

That is what my toaster is doing and it only 3 months old

Thx for that great vedio, my toster electricity is going throw but it still not stay down?!

wish me luck....

I cleaned my toaster and now it won't heat up

My toaster is trying to jeat up but won't

@sheilaballard553

2 жыл бұрын

Heat

No way!.. and i had to throw away my lovely toaster!.. why didn’t i see this video 😢

common bread 2/10

Instructions not clear. I now have to take responsibility.

i guess chamber was right

Just fixed my toaster thank you , your video was very helpful perfectly demonstrated