Outstanding, that was the best presentation & informative that I've seen on KZread explaining this job, plus all the bulb sizes***** Five Stars

Thanks for this informative video. I followed step by step and able to perform it. Thanks.

Excellent video. Clear and concise.

This is a great video. Very informative and articulate. Great job.

Thanks! I followed you step by step to change my lights

Thanks! Have the confidence to do mine now.

Excellent video! Was wondering how to do this. Thank you.

@TheOriginalMechanic

6 жыл бұрын

You're welcome and thanks for watching!

This was very helpful to identify all the fasteners attaching the front cowl. The 2009 has an additional panel fastener top dead center in front of the hood latch. Also, the OEM headlight assembly did not include the metal clip required for the side attachment bolt. I transferred from old to new, but only after securing the other two screws and found this third screw was not grabbing.

@davidnelson7713

5 жыл бұрын

I did the same exact thing.. that 10mm just kept spinning and spinning..

Thanks for the great video and help.

Awesome imma bout to do a black head light swap fantastic video sir thank you

@TheOriginalMechanic

6 жыл бұрын

You're welcome. Thanks for watching and providing the feedback.

The best video, thanks

Thanks for the instruction

Gracias me sirvió mucho el vídeo para hacer un trabajo

Thanks for the excellent video.

Very good video I have to change out my daughter's 2013 corolla left side bumper bracket the bumper keeps poping out on one of the tabs I hear they wear out in time original part is 33$ after market is 15$ though I hear its better to use factory spend more but a better fit..

Great job! Thank you for the instructional video. Def helps out

Excellent video. About that screw at 3:25, I used an electric drill with a philips adapter. The quick torque motion in reverse and adequate downward pressure did the work very well. No way on mine I could have used a screwdriver without stripping the head.

@TheOriginalMechanic

4 жыл бұрын

Thanks for sharing the good tip

@Blu-Man

4 жыл бұрын

@@TheOriginalMechanic new here do the 2010 model have clear plastic headlight covers over top that pop off

@TheOriginalMechanic

4 жыл бұрын

@@Blu-Man My 2010 does not have covers

@Blu-Man

4 жыл бұрын

It seems the previous owner must have installed no wander it's hard to see at night ima follow your how to remove the bumper and take these things off.

@Blu-Man

4 жыл бұрын

@@TheOriginalMechanic I'm new to your channel I'm a fan of your work do you make presentations weekly?

I have a 2013 and wish I knew the part numbers of all the fasteners. I'm missing one of the top ones, the threaded bolt with 10mm socket head. I have a diagram that shows the fasteners but it seems to be missing some fasteners or it's incorrect.

Thank you for the video. I had a car accident few days ago and now I need to change the bumper. Also, can you please tell me what is the tank that is located below the driver headlight and behind the bumper called..? Thanks

@TheOriginalMechanic

11 ай бұрын

I think it's the washer fluid tank.

I thought I was missing a splash shield underneath my 2010 Corolla LE. Yours does not appear to have one either. Do you have a lot of room in between the radiator and front grille and have with no center splash shield underneath?

@TheOriginalMechanic

5 жыл бұрын

Yes there is a lot of room, like almost a foot maybe. I didn't realize I was missing that splash shield.

Those screws would be useless for people, like me who has a quick release Fastener, for lowered cars. Its faster too because you just undo, the ties and the Front bumper cover, comes right off in seconds, that's a lot of different screws, to remember which one goes where I like to keep the screws, in a certain order that way when I'm putting them back on I know where they go saves more time, and less hassle, Toyota made it so difficult, to work on their cars, when I work on my Accord, everything is so simple and easy

The screw at 3:25 today is extremely tight for me. I’ve used PB Blaster, sawed it down to a flat head and it still won’t turn. Is there a nut under that screw?

@TheOriginalMechanic

6 жыл бұрын

I had trouble with that one too. There is no nut. Sounds like you're doing all you can. You can't really use heat by that plastic. Good luck with it.

@Ezdvd1

5 жыл бұрын

Same here, same exact bolt. Left rubber on, used channel lock pliers. Thanks for the video, a big help

@ 7:00

I counted 16 fasteners and you mentioned 14. You show 16 pcs too. What is right? Did I miss anything?

@TheOriginalMechanic

3 жыл бұрын

It's possible from model to model to have variations on little things like this. The important consideration is "does the cover come off?"

@richardyap7873

3 жыл бұрын

@@TheOriginalMechanic I am not talking about different model. I am talking about what you said and what you have shown does not match up.

@sdrivegarage

2 жыл бұрын

Yes 16. Still a useful video after 4 years.