After fighting to disconnect these VW connectors for years, I watched the video, walked out to the garage, popped the hood and disconnected the MAS connector in less than a second. Thanks for taking time to make this really helpful video.

@aldopaints670

2 жыл бұрын

I just did the same fucking thing lol

@HappyBagger

Жыл бұрын

@@aldopaints670 Same here. Having spent yonks trying to get rusty T20s out then struggled with this on the MAS connector, sorted!

@GoBIGclan

7 ай бұрын

@@HappyBagger any tips on the rusty T20's?

I just about cried when I finished this video, walked back out to the garage and popped one off with less effort than ever before in my 5 years of owning VWs and Audis. You sir are a gem.

@EstonianScrapper

2 жыл бұрын

i cried like a baby few minutes ago.. before this video i broke 2 of those clips off..

@Nelson4207

Жыл бұрын

@@EstonianScrapper no worries for anyone who does break em... Just zip tie em on. Works great 👍

@EstonianScrapper

Жыл бұрын

@@Nelson4207 thanks :)

Man, I just wasted 3 hours of my life because I didn't watch your video first. Works like a charm. Thank you!!!!!

@ve7yan

3 жыл бұрын

Only 3 hours?

Battled a connector to the diverter valve in a hard to reach spot for 45 minutes... after watching video took it off in 20 seconds. Knowledge IS power, thanks for sharing!

Would not think i would need a video tutorial to undo the connector clip. But i do! Thanks man.

I spent a good 30 minutes prying and pulling on this clip. After watching this video I was able to get it off in less than 10 seconds. Thank you so very much for sharing this!!! ❤

You just saved my wifes jetta from a sledgehammer-fest... No joke

@TheWormzerjr

3 жыл бұрын

damn, that video would have gotten millions of views. Do it anyway.

@robbisson6506

2 жыл бұрын

Lol!

@Nelson4207

Жыл бұрын

I wasn't reaching for a sledge yet, but man I feel that pain. I thought about intentionally breaking each connector and zip tying each one. Pesky little clips ain't enough to describe these pain in the azzez 😁 I don't care how many hands u get in there, they are a pain. Plastic being heated up to 150 degrees plus under the hot sun with engine running then down to 0 in the winter these plastic clips feel super britte and stiff

Love this! I've had my Audi for almost 12 years, that is still the biggest challenge for me under the bay. Thanks boet, drive safe.

You are a life saver. I have been trying for the last hour to remove electrical connections from my brake sensor and brake fluid level sensor and hoping I didn't break them. Your solution works. Thanks.

I am working on my harley that uses similar d-connectors. After an hour of looking, pulling with a few choice words thrown in, I decided to head to youtube for some tips. Your video was the perfect tip to split this type of connect apart - thanks

This video helped a lot, I could never get those clips off easily. Took less than 10 seconds with this.

After puzzling for an hour with my MAF connector, I can across your video. Tried it and it immediately worked. You are worth more than your weight in gold. Thanks

3:45 for the answer. Thanks for waterboarding me for all that time

@peytonbloom4123

5 жыл бұрын

Seriously like just shut the fuck up and get to the goddamned point already

@ryan33flagg3

4 жыл бұрын

So why bother waste your time commenting? You're all so ignorant. The guy gave you a detailed explanation of how the clips work, because obviously you don't know how to disconnect them. Be thankful he even posted a video for your dumb ***

@briandavis55

4 жыл бұрын

@@ryan33flagg3 Just busting chops, I was being helpful and playful. No need to get upset.

@VanLangDrew

4 жыл бұрын

kzread.info/dash/bejne/pHuczM-tltynmqw.html

@xXavorx

3 жыл бұрын

@@ryan33flagg3 LMFAOOO, this is the same shit I was thinking lmao

Dude you just save my life I just spent an hour trying to get those clips off without breaking it I watched your video to compress first and then pull it out and it came off with ease thank you so much !!!

Thanks for taking the time to create this tutorial, found it impossible to remove injector plug cap before watching this to understand the technique to push before pulling to release! Thank you 🥇

@4:00 your welcome.

@jamessims3983

4 жыл бұрын

Was just going to say the same!!! I was already frustrated enough after fuckin around under the car trying to remove a clip for the last hour lol.

@supersabrosinho

4 жыл бұрын

Mindless rambling is rampant on KZread. This could've been a 13 sec video

@kdoran709

4 жыл бұрын

James Sims I love you

@pmturso

3 жыл бұрын

Hahahahaha. I saw this after I commented. LOL. Sooooooo right! LOL Classic.

@mrlancekink

3 жыл бұрын

So much unnecessary talking.

A thousand thanks for this, 45 minutes of struggling with one of these clips whilst trying to find answers online and after watching this video it took a second to undo. Thanks!!!

took me an hour of trying to figure this out. 15 minutes of searching our video. 4:35 minutes in to your video walked out to my garage and it took 1 try. God send you are!

This is the best damn VW related video on KZread, It don't get no better then this!

It’s all about that compression step. This video explained and showed the simplicity of that method so well. Really thank you, made a nightmare job into a breeze.

Mate just saved me a load of hassle.Thanks from London, fixing old MK4 golf.Cheers

The best video on the internet!!!! (I’m changing my spark plugs).

Thank you sooo much! You wouldn't believe how hard this info is to find. People either understand how they work and assumes everyone else knows or like me couldn't for the life of me fugure out how to tske them off.

I couldn’t get it at all, even watching the video couldn’t get it but when you showed on the car it helped. It seems when you press it and lift the tab, the tab doesn’t seem to move but just pull the connector up anyway with the tab lifted as well and pops right off! Thanks man!

What about if its broken? that little thing to lift up

I LOVE YOU MAN!!! I spent 30 minutes removing my Audi Roadster panels off and then 2 hours trying to remove the fuel control module connector. Finally got to your video and in 5 seconds BAM! All done..... Thanks

Awsome........came off first go. 10 minutes of frustration for nothing before I watched this.

Yooooo.... you just saved me so much heartache. I've broken and had to repair so many of these in the past. That technique works for real.

I think you saved my day. Currently in the heat of battle with these things. Thanks !

Ohh man you are a life saver and i felt stupid for not looking up for this problem on youtube earlier

This is the only video which explains that the reason the pressing is needed is due to the weatherproof rubber gasket. Excellent tip, thanks!

YOU, good sir, are a true hero.

Să-ți dea Dumnezeu sănătate

After half an hour wrestling with a wiper motor connector that I couldn't work out how to get off, this video showed me the how to do it. Pushed it in while I pressed the clip and it came out no probs. Cheers!

Thanks!!! Was getting frustrated with a Beetle horn connector and saw your video. Came off in one second with no tools after compressing it. Lesson learned.

Best video, took me 5 seconds after watching this!

Just saved me from ripping off my maf connector in frustration!!! Thanks for saving my sanity. It worked a treat!

THANK YOU SO MUCH...im working on my tdi gold and would have figured how to changes the wires or anything without this video.. again thanks

Ha ha .... I'm watching this video holding a pick tool. I simply press on and pull and it popped off in .2 seconds!! Thank you sooo much!

Who is this FINE man and how did he know this is just what I needed??

3:31 is what you came here for. you're welcome

So easy to do with this help - thanks for stopping me breaking any more clips

It looks like a D, its pesky and hard to get off.... sounds like my wife's nightly battle. 🤣

You just saved my Saturday. Thanks!

You build fast cars... and deaf people. Volume is everything.

You are a legend, saved me a lot of time, thank you.

Bro you’re a life saver… i was taking off a loom from nissan navara and was fed up with these connector.

Thank you!!! After trying for 15mins i watched your vid and fot it off 😊

Gday from Australia, Thanks for taking the time to make and post this vid. Audi connectors really have been a pain in the past. I’ll be working on the wife’s Q7 tomorrow and I can’t wait to try this. Thank you Sir, I owe you a beer, Cheers 🍻

You just saved so much time I was about to destroy this clip

Thank You! Was trying to disconnect MAF sensor wiring to move the MAF’s and air ducts out of way to replace my VW’s twin Air Filters. Should be a 5 minute job, but there’s no room in there and the vacuum lines run atop the passenger side air box. I am getting low airflow codes in the VAG COM. Cheers.

Wow, Thank you billion times for sharing such a valuable tip. I struggled a lot on my first day of part time job I started trying to take off connectors before removing the seats. Thank you and I subscribed.

Thank you so much. As soon as you mentioned the orange grommet, I realised what I'd been doing wrong. You are a star! 😊👍🌟

You are a legend, just spend 10mins trying to remove a connector underneath my TT. Watched your video - Bam! Thank you :)

Bro.. you should get the mechanics equivalent of a noble peace prize. Hell, maybe a actual Nobel. Thank you!!!!

Oh my goodness! Thank you so much. I was really struggling with removing the alternator’s connector on a Tacoma. I did exactly what you suggested, and it worked. Thanks again.

Thank you sir, wish I had seen this before I sliced my thumb open! Great video, my digits thank you!

Omg this works so well… just saved me on my current project

I was getting very upset with procedures that simply said "remove electrical connector" with no explanation of HOW. Awesome video! You should do more of these for the other connector types! I tried a couple of hours to remove it, then found this video and had my connector (high pressure diesel fuel connector on Diesel Porsche Cayenne) removed in 15 seconds! Thank you sir!

Thank you sooooo much ! I thought it was just ME cause I was a girl and just couldn’t do it but when I asked guys to help me they couldn’t do it ether ! I cried and didn’t know what to do then I found yr video. watched yr video and was able to do it in 2 seconds . ❤

Most useful video in youtube!

Mate, This is the best video on any platform! One i saw your video i was able to remove the connector in seconds, and that was after messing with the clip for sometime! I am now subscribed to your site!

5 Stars, saved me hours of homicidal rage

After an hour and a half we couldn't separate a tab from a custom Eagle Eye light for Chevy S10 after watching this video and butchering it a little bit the connector I want up pushed it in which I tried previously but not to the way he shows and it came right off with my bare hands not the wrenches we all had out thank you for the video awesome brother

Thanks man! This helped me out on my 2006 Audi alternator

I have a question what if the little clip that you lift is allready broken then how can you remove it from the coil? Can you stick a flat screwdriver or pick tool in between the coil and ignition coil connector to remove it from the coil?

Men... you really nailed it. Thanks a lot. If you ever are in town (Puebla), please let me know. I owe you a Beer...🍻.

Legend, looked at multiple videos of people using screw drivers and pick tools when following your instructions removal was straight forward.

Thank u boss... Love from India❤❤

Omg...that foopin easy!!! Got to admit...I often don't want to work on my favorite ever cars just because of this simple problem that you explained so well that even in a difficult spot...it came out like butter!! Cheers mate!!! Subscribed to your channel!!💯👍

Just bought a used Mk4 Jetta 1.8T for a good price last week, my first VW so wasn't sure how these connectors worked.. Thanks, probably saved me from breaking one in frustration. :)

OMG, thank you so much for this little video, Chris, I was starting to get very frustrated with the air flow meter plug, but after watching your little video, it's just too easy :)

Wow, this video just cured my migraine...

I wished I had watched this video long time ago before I broke 2 connectors to get it out... Good video

Thank you, thank you, thank you! Two days trying to get one of these freaking connectors off!

Man!! Thank you greatly for this video! Finally got them DAMN cam angle sensors replaced!!

Thank u! This saved me a lot of grief when I changed my sbutt plugs in my vag

This is an awesome video about VW Coil Connector Repair thx Chris

Legend. Saved my car from a gallon of petrol and a match!

Omg. My brotha, thanks. Just wasted an hour and was trying to use the hook you told us not to use. My temp was rising which usually means ima break somethin. God bless

This was exactly what I needed. They came right off once I tried this. Thank you!

A pleasure to look at and helpful!

Wow… damn “d connectors” never felt so lost in my life! Thanks for the information!

hmmm nice tutorial🤦🏽‍♂️ but i broke the small tab that your supposed to pull back before watching. any solutions? i cant release the safety catch since the tab is broken , im stuck.

couldnt get a good view of the connector(connecting door frame to door skin) while struggling to hold door up, stumbled across this video while looking for one to help me ID the connector type, thought no harm in trying and voila it was a d connector(easy to see once disconnected) and it came off EFFORTLESSLY with this technique, thanks

I did exactly what you said and it worked! No damage to the part!! Thank you so much!

Just the video i was looking for. Thank you

great video! Would be great if you would do a video on replacing the coil Pack wiring harness for longitudinal engines. I have a 2002 Jetta 1.8turbo

wow oh wow. Ive been struggling for years. Last night I broke a d clip connector trying to change it. Have the part gonna order the tool . Thanks

Awesome so simple, I’ve struggled for years with those. Just watched this & went out & popped one off in 2 secs 👍

How do you get the connector off with a snapped clip? Previous owner was clearly an ape and now can’t get one of mine off? Shall I just pull it really hard or what

Dude. I can’t tell you how much this just helped me. 🙏

You saved my life

DUDE! You're a life (and knuckle) saver!!!

What a great little video! Thanks man!

Thanks - Just what I needed! Replacing a TDI engine on a 2003 Jetta - lots of connectors in hard to reach places.

Pretty clever on new connectors but what about a 22 year old car with hard plastic and hard solid rubber grommets?

Many thanks from col in nottingham england...maf sensor plug removed in seconds...after struggling for an hour.....

You are a god damn hero. I was going nuts last week disconnecting the bottom sensor from the JB1 on my wife's Golf R.

Very good information.