How to Remove & Install your Volvo XC90 tail light
Тәжірибелік нұсқаулар және стиль
A step by step video tutorial on how to remove and install your Volvo XC90 Tail Light to change the assembly or bulbs. For used Volvo parts go to stores.ebay.com/used-volvo-parts also visit our web site: www.erievovo.com
Пікірлер: 17
THANK YOU! I am sure I would have eventualllllllly figured it out on my own, but you saved me the time and headache. Got this done really quickly. I also swapped in a new rear panel while I was at it because the old one got cracked. Thanks again!
Thank you for the tutorial, which mapped out the job perfectly.
Thanks for sharing your expertise. Excellent information.
Thank you for this tutorial! No need to pay $30 in labor -- I can put it on the tank =P
@rosey61786
10 жыл бұрын
I love my XC90!
@elhadiechehab55
6 жыл бұрын
Thanks from pepboys
thanks! looks pretty simple.
Thanks for the video, helped greatly. I love KZread ;)
Thanx for sharing!
Thanks for your help ☺️
Great video!
Thank you
Thanks
Can you replace that trim panel below tail light without removing light or do I need to remove tail light then pop off and replace it. Mine got crushed and needs to be replaced
@robnation2475
5 жыл бұрын
You can try wiggling it out (no hardware holding it in) but if it's still snapped in well taking the light out isn't that much trouble. (A flat plastic trim tool might release tabs on top of trim)
0:52
1:38 TIP: Keep lower tailgate down to remove lower tail light. If bad wiring is to be replaced Pop-out plastic body-colored trim between bumper and tail light to get to the last remaining wiring connector. Trim piece snaps in (no hardware to remove trim just flex taps loose on top and jiggle)