Nice. I used to do mobile wheel repair. Did 12-15 wheels a day for dealerships all over Phoenix. You really only need to go 120-320-500 on the discs. If you deflate the tire you can get in there better. Also, when you deflate it, you can use playing cards to mask the tire. Then roll a card up and tape it. Then slide the rolled up card over the valve stem to mask it. I could refinish and paint 4 wheels in 45 minutes.

@cvrpov

3 жыл бұрын

Thanks for feedback mate. I have worked for dealers also and very similar to yourself. I really wanted to keep this one as DIY as poss 👍🏼

@kimgray1606

3 жыл бұрын

@@MICHIGANMIKE12 Go to church

@MICHIGANMIKE12

3 жыл бұрын

@@kimgray1606 will do that after you refinish my tyres so they look sharp as I wheel in to church parking lot....want to make good impression on the bishop...

@kimgray1606

3 жыл бұрын

@@MICHIGANMIKE12 👍😇

@jr4750jr

2 жыл бұрын

Great advice. Thanks.

Every married man should learn this

@MichaelTheArchAngel777

3 жыл бұрын

😂👍

@San-uu7qc

3 жыл бұрын

😂😂😂😂😂 Drive normal and don't hit the curb.. done deal

@tanyaerskine7657

3 жыл бұрын

lol -- true. And all the men who drive long haul trucks. As a woman who happens to be a mechanic, the curb bite from a woman driving the family car pales in comparison to the body damage I repair on an almost daily basis thanks to their husbands who are trying (and frequently failing) to drive a long haul truck and trailer. Bottom line: everybody does it. Not all of us gals suck at driving 😉

@San-uu7qc

3 жыл бұрын

@@tanyaerskine7657 🙏🙏🙏🙏🙏 Goddess

@davidblack4195

3 жыл бұрын

@@tanyaerskine7657 I've been in the car with women who couldnt drive and they knew it. The more dangerous is the women who think they can being oblivious that they really shouldnt. There are a few exceptions. Lizzy being top of the bunch

Cool tip. I had a blow out the other day and the rim got well worked. Glad to know there is a solution other than buying a new wheel!

BALANCE YOUR WHEEL before installing again on vehicle. Knocking material off unevenly as was done will knock your wheel balance off. Will wear out your tire unevenly and will not be as steady on the road, if alignment is off any bit at all.

@nexpro6985

Жыл бұрын

yep

@cvrpov

Жыл бұрын

Been covered a thousand times

@ssanford

14 күн бұрын

You could also do this right before you have your tires replaced

Thanks for this video, I’m going to give this a go after watch this as the wheel turned out 1st class. Thank you. 👍🏻👍🏻👍🏻

@cvrpov

3 жыл бұрын

Good stuff 🤜🤜

The most simplest video ive seen. Well done my dude!

@cvrpov

3 жыл бұрын

No problem matr

You just saved me a fat bundle of cash, as my Quattroporte rims were due for a job this summer. Now I'm gonna do them myself. thank you so much for this most useful instruction.

My wheel damage has been driving me crazy!! Thku so much for the vid!

@cvrpov

3 жыл бұрын

No problem 👍

Don’t think you can get any better than this ! Well done 👍

@cvrpov

8 ай бұрын

Thank you! Cheers!

Very nice mate, clearly explained, and a great help for those of us without all the gucci kit, Thank you.

@cvrpov

Жыл бұрын

Thanks for watching Greg

This video boosted my confidence in my cars stock rims. I’m definitely going to use this technique to refresh my girls shoes! 🚗💨 Thank you!

@cvrpov

3 жыл бұрын

Nice one 👍

@lillnemo1

2 жыл бұрын

Confidenc in your stock rims..... Wth do you mean? I really dont understand. You were afraid they were goin to break or so?

Thank you for that. Had some damage to my wheels from curb and potholes couldn't afford to get them cleaned up professionally but thanks to you I can now get this done on the cheap. Cheers.

@cvrpov

Жыл бұрын

No worries mate

@ChrisCorkPhotography

Жыл бұрын

Great video, shall have a go at it soon!

Great tip for quickly and cleanly cleaning up those wheel scratches. Thanks!

@cvrpov

Жыл бұрын

No probs

Great help for cheap DIY fixes thanks! ideal for those of of us who haven’t got expensive cars and don’t want to pay professionals.

@isabelnicoll1673

3 жыл бұрын

Professionals do the exact same thing he is doing but with compressed air tool then paint them if u have confidence in yourself it’s pretty easy to do it

@stevenss9249

2 жыл бұрын

@@isabelnicoll1673 1¹

@heimatliebe116

Жыл бұрын

I will try this on my old Porsche‘s extra rim that I have laying around.

@FRohloff-md7kf

9 ай бұрын

Pl 66

@FRohloff-md7kf

9 ай бұрын

Parts catalog for Frigidaire stove model fcrg3052asc

Brilliant! I just bought a set of used wheels with curb rash on a couple and this just made things a lot easier!!

@cvrpov

11 ай бұрын

Glad it helped!

Incredible!!! I was considering paying to get this done on my Lexus (previous owner curbed it), but I am absolutely going to go DIY after seeing this. Thanks for posting.

@cvrpov

3 жыл бұрын

Great stuff

@seandrayer208

Жыл бұрын

How did it turn out?

Hey Thanks!!! Soooo helpful Never in a million years would i have worked this out Thanks so much

@cvrpov

2 жыл бұрын

Thanks for watching

Its such a blindingly obvious remedy for kerb damage once you see it ....but you have opened my eyes to it ..never even thought i could do that at all......thanks pal .....

@cvrpov

3 жыл бұрын

I know haha. When u know u know

This was a good video with fine workmanship and advise. Very thankful you showed the result of the paint job. Looks amazing.

@cvrpov

3 жыл бұрын

Thankyou

@JayyBird93

2 жыл бұрын

@@cvrpov how in the world did you match the paint to the wheel or did you repaint the whole thing?

@allenrj1

11 ай бұрын

@@JayyBird93 Excellent question, pity there is no excellent answer to accompany it.

Great video mate, thanks for spreading the knowledge. Looks quite a bit easier than I thought it would be . And you didn’t have to break the tire down.

@cvrpov

7 ай бұрын

Glad you liked the video

Great tips. Very helpful. Appreciate you sharing your experience!

@cvrpov

3 жыл бұрын

No problem

Thanks for the vid fam‼️ it looks brand new‼️ 🙏🏽👌🏽💯

@cvrpov

3 жыл бұрын

No problem

Looks really good. I was sceptical till watching it and seeing the results. Thank you

@robhargraves3805

3 жыл бұрын

I was thinking exactly the same.

Dude I’ve been putting this job off for months , the thought of filling and sanding and repeating process. Cheers mate 👍. New sub and liked

@cvrpov

3 жыл бұрын

Loads easier/quicker mate

Absolutely brilliant. I instantly subscribed. Thanks!

@cvrpov

3 жыл бұрын

Great, appreciate the feedback

@jeremyrigden9200

3 жыл бұрын

Me to.

Very nice! I have a very small 2" spot on the wheel of the car and some on the golf cart. I will give this a go looks like a fun little project. THANKS

@cvrpov

2 жыл бұрын

This should work great. If your in the uk you can buy the kit from www.paintgear.co.uk

thanks for posting this. it's given me the confidence to repair and dip a whole set of wheels on a G37-S i just bought.

@cvrpov

Жыл бұрын

Good stuff

Great video. However, I would have preferred you do both sanding and painting to reflect a who package. I know doing this would involves longer recording time yet you could do videos in bits and merge them. With that said, you're a great DIYer though. Thank you

I used your video to do my 2010 c300 my wife can’t park 🤣 it took me longer than 15 per wheel however they came out great and I did have them professionally powered coated then rebalanced before mounting them back on the car. Top tip this does work! It saved me a lot of money by doing the prep work. Cheers mate

@cvrpov

3 жыл бұрын

Great stuff

@captainamericaamerica8090

3 жыл бұрын

Didn't need to Rebalance. You threw good money away. You could not even weigh what came off. So little.

@dwell7526

2 жыл бұрын

Hey Vince, where did you get the pad from

@phademusic4744

3 ай бұрын

​@@dwell7526its the same one used for doing headlights

Brilliant, I've done my wheels using an old cordless and a sanding disc kit I bought on line for £12. I used acrylic wheel paint in rattle cans and got decent results, all in only cost me a day in the garage and about £50. Thanks for the tips 🙂

@cvrpov

3 жыл бұрын

Brill 👍🏼👍🏼😎😎

@nigelpeters2201

3 жыл бұрын

Do you have a link for sanding kit please?

@tooyoungtobeold8756

Жыл бұрын

Some places will do it professionally for £50.

@robberhd3218

Жыл бұрын

@@tooyoungtobeold8756 Yeah per wheel!

@insertnamehere4419

9 ай бұрын

@@tooyoungtobeold8756 Ya...try twice that, and per wheel.

This is great info I will give this a try. I picked up a couple of aluminum wheels with bad curb rash at the local pick and pull Thanks!

@cvrpov

3 жыл бұрын

Good luck. Have a go and enjoy

wonderful video. I’m feeling a little seasick but will remember the technique.

Perfect thank you,, subscribed

@cvrpov

3 жыл бұрын

Cheers!

This is so awesome 👏🏽 and amazing 🤩. So cool and just simple!!! So clever! Thanks very much indeed for your video 👏🏽👏🏽👏🏽

@cvrpov

3 жыл бұрын

No problem

Thanks for the brilliant vid..easy for the simple guy with limited tools 👍

@cvrpov

3 жыл бұрын

Glad it helped

That works surprisingly well

I hope KZread has compensated you well for this gem of a vid. Agree, step by step, well-said, thank you for demo’ing and describing as you go!

@cvrpov

Жыл бұрын

It's given me a few crumbs mate thanks for watching

I will be doing this to my wheels tonight after work. Great informative video!!!!

Absolutely helpful and good idea 😊 thanks for your help will try this

@cvrpov

3 жыл бұрын

No problem thanks for watching

Awesome video bro! I am going to fix my dually rims. Cheers from Canada!

Good job! We would really appreciate it to see how you did the paint job ☺️

@cvrpov

3 жыл бұрын

I have a gloss black wheel spraying video to upload soon

@P8FPV

3 жыл бұрын

@@cvrpov gloss black yak what silver do you use pls😉

While I have only watched 2 or 3 videos on wheel repair so far, this was far and away the best one yet. The narrative was clearly understandable, and you went step by step showing and explaining the whole process quite well. Unfortunately, I am not sure, I will have to look, but I think the damage done to the wheels on my car by the previous owner may not be repairable, as the " lip " on the wheels is a bit more pronounced.

@cvrpov

Жыл бұрын

Thanks for the feedback Howard

@georgeparker555

Жыл бұрын

You might have to use bondo to recreate that lip

@trentdaddydolla647

9 ай бұрын

​@@georgeparker555until you hit another curb and then the bondo crumbles lol

@georgeparker555

9 ай бұрын

@@trentdaddydolla647 either way the wheel would be curbed and would need to be fixed

Thanks for this brother!

Fantastic work, I didn’t think it was gonna look like that. Just being honest came out really well. Great work brother.

Very good, nice easy fix and some good useful tips, well presented 👍

@cvrpov

2 жыл бұрын

Thx

I'll test that out on the neighbours car when it gets dark.

@cvrpov

3 жыл бұрын

im sure they will be thrilled

@robroberts9051

3 жыл бұрын

lol

@ifyobi5342

3 жыл бұрын

Time to go to jail 👁👀

@user-ck6kq8zl2i

3 жыл бұрын

When you need an 80s style CD holder to store your 70, 80, 120, 340,500 and 720 sanding pads . Good work tho.

@foodparadise5792

3 жыл бұрын

@@user-ck6kq8zl2i 80s were cassette and 90s were CD, stop lying.

That's a brill trick. Thanks for sharing

@cvrpov

3 жыл бұрын

No problem 👍

Absolutely fantastic. Thank you

@cvrpov

3 жыл бұрын

No problem

Add safety factor note. Get rim Balanced after doing this, because you took away metal,it needs to be added back IE: Wheel Balance.

@planje4740

3 жыл бұрын

- but hi think not about

@KBarron43

3 жыл бұрын

@@planje4740 but, think not hi about

@reeceiris4482

3 жыл бұрын

@@KBarron43 hi, think not about but

@thatsclassified1

3 жыл бұрын

@@reeceiris4482 tf fuck is happening?

@stevenwalker9013

3 жыл бұрын

@@KBarron43 - hi but not think about

Great video!

@cvrpov

3 жыл бұрын

Thanks!

I love how you reply to all new comments!

@cvrpov

2 жыл бұрын

I try to.. even thought a majority is abuse

@af252

2 жыл бұрын

@@cvrpov oh no! Oh well keep your head up anyway

Awesome tips and I will be fixing mine this weekend

@cvrpov

3 жыл бұрын

Good luck!

Just did mine, had some roloc's, 120, 220 and 320. I used my die grinder, and a drill like yours along with some cotton polishing tips and tripoli compound. The only problems is clear coated Aluminum and painted wheel combo's. It's doable, just a lot more work polishing the sanded aluminum up to the original clear coated sections. Once I had the aluminum polished a little above satin I used some rattle can 2K clear to recoat the aluminum.

@mpreiss7780

Жыл бұрын

Yeah I was wondering about that as I believe my Maserati QP does have a clear coating on the rims.

@cvrpov

Жыл бұрын

Maybe check out my other wheel repair videos in the playlist for some answers?

That's great. How about showing how you painted it?

thanks for the feedback

Absolutely well done

Cheers and thanks for the video, like many other people I never would have guessed that kerb rash could be so simply repaired! Great stuff mate and thanks again! Regards Robert Z

@cvrpov

3 жыл бұрын

Glad its helped

Great video, after all my years I,ve never really considered grinding down alloy wheels , going to give it a try. Thanks

@cvrpov

Жыл бұрын

No problem

You're a magician! Very useful tricks, glad I found the channel.

Nice simple video bud just showing us that’s it’s not hard when you approach it the right way 👌

@cvrpov

2 жыл бұрын

Thanks for watching pal

I liked the vid, and you’ve shown me an easy way to cheer up some Old alloys cheap. But what’s absolutely priceless is reading your awesome reply’s to some of these comments 😂😂😂 Excellent

@cvrpov

3 жыл бұрын

Its amazing that you can make a video for no gain other than to maybe help at least 1 guy who's got very limited tools, which is completely free to watch.... and it infuriates certain people to the point that they have to take the time to abuse the guy who's made the video... incredible 🤣👍🏼

@drumherodrumschool1369

3 жыл бұрын

@@cvrpov you've helped me a lot! So thank you don't worry about the naysayers

Fantastic video, probably the best video on KZread! I have a couple rims that look exactly like those, they look bad, I'm going to take my time and do them the exact same way, using this video for reference...again great video!!!💯👍👍👍

@cvrpov

2 жыл бұрын

Cheers tkny

Nice job bud impressive thanks for sharing 👍

@cvrpov

3 жыл бұрын

Thanks

Good video. I may try this. Thank you.

I used an orbital sander. Little bit more control but same result. Nice

@cvrpov

3 жыл бұрын

Yep sound mate

Ntil i watched this video i would never have considered doing this. But now i will certainly attempt it. Is there a special paint you would recommend to do this A brilliant and very helpful video - thank you

@cvrpov

3 жыл бұрын

It defo saves some time 100%

Great tutorial, thank you.

Brilliant vid no need to remove tyres thank you 🙏

@cvrpov

2 жыл бұрын

Glad you enjoyed it 👍🏼

Great vid! Would you be able to show how to paint the wheel also? Thanks!

@cvrpov

3 жыл бұрын

I have done now thanks

Excellent Video as said all Married men need to learn this as soon as we say. I DO

@cvrpov

2 жыл бұрын

Haha

Good video and nice job. Thanks for sharing.

@cvrpov

3 жыл бұрын

No problem. Thanks for watching

Oh wow that genuinely look like brand new!

Looks like.a brand new wheel bro good job

@cvrpov

3 жыл бұрын

Thanks for watching 🙏🏼

Very helpful! Can you make a video on - a proper way to repaint alloy wheel?

@cvrpov

3 жыл бұрын

Yes I will

Thanks for the video! I’m going to give this a shot!

@cvrpov

2 жыл бұрын

Good stuff 👏

Fantastic...exactly the video I needed. Thanks.... much appreciated. Now my rims Ill look like they're brand new...Again!!!!!!

@cvrpov

2 жыл бұрын

👊🏼👊🏼

Don't forget to re-balance your wheel. You may of took off enough metal to offset the balance of the wheel.

@cvrpov

2 жыл бұрын

Probably need re balancing after serious kerb damage regardless

I reckon I'd wait until I was about to change the tyres. Effective though!

Thanks great video. I will now have a go at my wheels my wife kerbed ( well it couldn't have been me could it 😉 )Some how don't think they will look as great as yours do.

Wow thank you, watching something which actually useful on KZread, how refreshing for a change.

@cvrpov

10 ай бұрын

Glad it was helpful!

Very useful video and simple depending on the style of the wheels and if you had a Drexel and similar attachments could be even easier so thank you for this video.

@cvrpov

3 жыл бұрын

Yes true and no problem 👍🏼👍🏼

@chrisdevalcourt648

Жыл бұрын

Do you mean Dremel?

@johngoodall7097

Жыл бұрын

@@chrisdevalcourt648 misstyped should be Dremel!!!

Basically what the shops do for to much ...great vid my boi ...never knew this and who does'nt own a power drill ...although i hope i dont come across havin to do ...but its a good way to help others or even make lil cash if any wanted to tip a bit

@cvrpov

3 жыл бұрын

No problem at all

So simple yet so Epic love the video bro

@cvrpov

3 жыл бұрын

Nice one

Wow very useful, can't wait to try this!! Thank You!

@cvrpov

Жыл бұрын

Glad it was helpful!

omg thanks a lot, never thought it could be this easy!

@cvrpov

3 жыл бұрын

Now it is 👍🏼

Brilliant. I never knew alloys were so easily sandable.

@cvrpov

2 жыл бұрын

With the drill and sanding pads they are ! By hand its not the case

Nice job bud , don’t listen to the no it all’s ...you’ve inspired me to do mine thanks 👍

@cvrpov

3 жыл бұрын

Thats what its all about mate. Amazing how many negative comments you get trying to share some knowledge

This is such a great idea. Thanks for sharing😊

@cvrpov

Жыл бұрын

Thankyou

Very informative video but you should have shown the part when you painted the wheels too.

Thanks! Gonna give it a try. Only thing I was wondering was if there would be enough material removal (including the initial damage) to throw off the wheel balance?

@cvrpov

Жыл бұрын

I always recommend balancing the wheel regardless

Brilliant video! thanks so much. Off to screw fix for the attachment now...!

@cvrpov

2 ай бұрын

www.paintgear.co.uk probably has everything you need

great job fairplay bro

@cvrpov

3 жыл бұрын

Thanks for the feedback 👍🏼👍🏼

Nearly 2,000,000 views ! Good job mate !

@cvrpov

3 жыл бұрын

yeah crazy. thanks

@kianadanny

2 жыл бұрын

At least 1,999999 married man had viewed this

Hmm imma try that!!!!!

@cvrpov

3 жыл бұрын

Have a go 👍🏼👍🏼

@robertpryor7225

3 жыл бұрын

Gimme that

I love that I'm gonna try it on mine!

@cvrpov

2 жыл бұрын

nice one

Great video; just enough video to show how it’s done . Thanks !

@cvrpov

3 жыл бұрын

Glad you liked it!

Brilliant! Simple fix, thanks heaps for sharing, can't wait to cheer my mags up!

@cvrpov

3 жыл бұрын

No problem

@chacoarreola3809

3 жыл бұрын

Do you have us mags

Great video just ordered the pad & discs, did you lacquer the wheel after spraying 👍

@cvrpov

3 жыл бұрын

Spray with base and lacquer

Best application on KZread thank you

@cvrpov

2 жыл бұрын

Thanks

Superb thanks for the tutorial

@cvrpov

3 жыл бұрын

No worries