This video is a life saver. My debit card fell by the e brake and I didn't know how I was going to get it out. Thank you🙏🏼

@TDLDIY

2 жыл бұрын

You're welcome!

@katanatheawesome2314

2 жыл бұрын

That's the same reason I'm watching it!

Just fixed an aux input issue on my 2010 Mazda3 with some help from this vid. Thanks so much!

@TDLDIY

5 жыл бұрын

Thanks for watching. I am glad it helped you out.

@conorh-ington9427

5 жыл бұрын

Is there any way you can give a quick rundown on how you were able to remove the aux input and replace it? Would be much appreciated

Oh my gosh, thankyou so much for this, this morning I dropped my engagement ring in the car and it vanished, I had looked everywhere, under console was the last place I could think of but I didn't know how to get it out, it was so easy after watching this video and I FOUND MY RING! Woohooo!!!

Thanks for the video. Helped me in replacing the fan switch. Service Manual is useless in terms of showing how to remove console/dash apart.

@TDLDIY

5 жыл бұрын

Hey No Problem I am glad it helped you. I also find some service manual not good at showing and explaining well. Videos are always the way to go for me. Thanks for watching!

Thanks for this! I like that I was able to take a short break and learned everything I needed to know. Well done!

Thought I would never see my Right airpod again😭😭 Thank You so much!

@TDLDIY

Жыл бұрын

Your very welcome, I am glad my video was helpful.

Cheers. Was not keen on pulling center console out after taking out the 8mm screws, still seemed fixed - watching someone else go first was great! lol

I love how you show how to put it back together. Almost everyone says "That's it guys. Just do everything in reverse to put it back together."

@TDLDIY

Жыл бұрын

Thank you for the great comment. Yes, alot of the time is everything done but in reverse but sometimes you need to do a little trick to get it all back together. Plus, it better to show it from start to finish. Thanks for watching, consider subscribing if you havent done so already.

Outstanding video! It was exactly what I needed to see to complete my project (new head unit and running -- and hiding -- new USB cables). Thanks!

@TDLDIY

5 жыл бұрын

That's Awesome I love hearing about people projects, and i am glad my video helped. What head unit did you put in?

@jnordcrane

5 жыл бұрын

@@TDLDIY An android 8 unit from CarNaviPlayer with Android auto and Car Play. Terrific product. I wanted to run the Android auto usb cable and the separate usb cable from the head back to the compartment in the center at rest, and want sure how to get it all apart so i could his the cables under the center console. Bingo! There was your video. perfect timing!

@TDLDIY

5 жыл бұрын

I have heard good things about those units. I think Android auto and Apple Car play are great addition to any vehicle. Running that usb cable is exactly what i would've done as well, plus easy connectivity close by. Thanks for sharing your project and i am glad my video could help you out along the way.

Dropped about 5 grams of weed down this hole and desperately needed to get to it 😂 i owe u one dawg

@TDLDIY

2 жыл бұрын

haha shit man thats sucks. Well i am glad my video helped you out.

@dale1782

2 жыл бұрын

@@TDLDIY ❤️ your a hero

Never knew it was so easy, needed this the splice my amp turn on with the cigarette lighter. Thank you

@TDLDIY

5 жыл бұрын

Yes, it's pretty easy. I am glad you liked my video and it helped you with your project. If there's any other videos you would like to see feel free to let me know.

@magic6947

5 жыл бұрын

@@TDLDIY Will do man. This is the last step for my sub hehe

@daltondaniels890

4 жыл бұрын

What wire on the cigarette lighter did u use to splice for the remote wire

@daltondaniels890

4 жыл бұрын

@tdl diy

@daltondaniels890

4 жыл бұрын

@magic69

You are a hero. You know that? Thanks so much.

@TDLDIY

3 жыл бұрын

I am glad i was able to help you out. Thank you for watching.

My home key fell under that shifter knob… thanks for saving the day.

@TDLDIY

2 жыл бұрын

Glad to help!

Thank you, you just saved my life

@TDLDIY

5 жыл бұрын

Hey Np, Thanks for watching.

Really helpful thank you

Thankyou done in two minutes :)

@TDLDIY

4 жыл бұрын

Your Welcome I am glad it was easy for you. Thank you for watching

I lost my earbud under the cup holder. Thanks man!

@TDLDIY

2 жыл бұрын

Hey no problem i am glad my video was able to help you.

Proper home grown DIY video, right down to the Timmie's winner in the cup! Cheers for putting this out, made a breeze of cleaning & repairing the shifter slide covers that got bent & was causing a janky shift!

@TDLDIY

4 жыл бұрын

Thank you i am glad you liked it. Lol oh yes the timmies

Thank you SO MUCH!!

Great video!!!!

@TDLDIY

4 жыл бұрын

Thanks for watching.

Nice vid and feedback! I’m your 100th like :)

@TDLDIY

4 жыл бұрын

Thank you! hey that's awesome thanks for your support. I am glad my videos are helping people that's all I wanted to do. As I have tried doing stuff and there wasn't certain video on whatever I was doing so that why I made the channel just glad to see other could use some information I have put out there.

Perfect! My outlet and aux port in the center console were not working, found they were left unplugged under the console.

@TDLDIY

2 жыл бұрын

I am glad my video helped you out to a certian extent. Werid it was left unpluged... but at least it was an easy fix. Thanks for commenting.

Great video! Thanks. I was wondering while you were there, did you see a bulb by the heating/cooling dial? I have a 2010 and one of those bulbs burnt out. I am jealous of the heated seats and USB port. Haha. Cheers!

@TDLDIY

2 жыл бұрын

Thank you for watching, I believe there is a little led bulb but cant remember 100%.

thanks for that, thumbs up !

@TDLDIY

3 жыл бұрын

Your welcome glad it was helpful.

Super Thankful!! I had to replace my console in my 2013 MS3 with a brand new one from Mazda this was very helpful the night before I started the install.

@TDLDIY

3 жыл бұрын

I am glad it made your project that much easier. Thanks for watching and consider subscribing.

Much thanks

@TDLDIY

Жыл бұрын

You're welcome!

Thank you

@TDLDIY

2 жыл бұрын

Your welcome, I am glad you liked it.

Thanks for that

@TDLDIY

2 жыл бұрын

your welcome

I cant seem to break the console loose. 4 x 8 mm bolts, i unplugged the aux cable, and the cig lighter. the two side panels are off. I had tried to wiggle the bottom like you had but it did not work. Any other suggestions would be nice thanks.

I love you

How did you unplug the aux connector? I can’t figure it out. I have the port removed just can’t get the connector to unplug.

I appreciate this video. For the life of me, I can't get to the damn 12v socket connection to replace it. Any info on how to get that out would be helpful

@TDLDIY

4 жыл бұрын

Have you tried just checking and replacing the fuses for the 12v socket? If you have replacement them and still doesn't work and need the replacement try eBay, Amazon, dealer and or scrap yard/ pick n pull. Thanks for watching I hope this helps

@TDLDIY

4 жыл бұрын

I can do a video when I get back I am away for work and I can look into it further. I would check the fuses like I menitioned before and I will look at making a video when I get back in a couple weeks.

@Wanderer2266

4 жыл бұрын

@@TDLDIY you don't have to make a whole new video. I just wanted to replace the one in the console with a dual USB plugin instead. Though I will need to check the fuse anyway, because I went to use it a couple years ago and it sparked like crazy. Haven't touched it since

@TDLDIY

4 жыл бұрын

@@Wanderer2266 you should be able to pop it out or depress some clips to release it. The you should be about to get a universal like you want a dual usb. if it's sparking your right to change it out.

How do you put them back

my light is out on the 10:54 is that a bulb you just pop in ? do you know the size?

@TDLDIY

2 жыл бұрын

I dont think it is a bulb you can just pop in/ out. I am unsure of the size. Looks to me like a little led light that is most likely soldered directly to the wires. If your pretty handy and you have a scrap yard near by i would go there and and get one and if you have cut it out then no big deal then you can figure how its connected. Then swap it out with yours. This way you had one it once basically getting it out in the scrap yard and have a good idea how to do it on your car.

@JavierPerez-pf7ub

2 жыл бұрын

@@TDLDIY THANKS

I dropped my ID by the break and thought I was screwed! Thanks!

Has anyone found a vid for the 2018 Mazda 3?

@TDLDIY

4 жыл бұрын

what video's of the 2018 Mazda 3 are you looking for?

Oat oat oat oat oat oat

Wish you showed how to take the first part out rather than just doing it off camera

On my way to go do this. A little frightened of what I’m going to find…

@TDLDIY

7 ай бұрын

lol haha yes you might find some treasures.

BUT I CANT MOVE MY GEAR TO DRIVE

@TDLDIY

5 жыл бұрын

Hi I can help with that, You will have to put your key in and turn it to ACC should be the first click, Then while press the brake pedal you should be able to more the gear selector. I hope this helps if you have any more questions feel free to ask. Thanks for watching my Video.

@christiej4840

5 жыл бұрын

Unfortunately I was trying to get it off cause I spilt some red bull down there and couldn’t get the car into drive, I eventually got it off enough to hold the gear lock back and move it into drive. Took forever though!

@TDLDIY

5 жыл бұрын

I am glad you were able to get it to move.

How to remove climate control

@TDLDIY

2 жыл бұрын

Sorry for the late response just noticed your comment. Good question i will do a video on that in the near future.