I stumbled on this video tutorial and thought it is the best instructional I have ever watched. While I had not, and do not, plan to install new headlights in my Mazda 3 ... I could not stop watching your presentation. It is flawless! Kudos SPECDTUNING!

extremely helpful - thanks so much for posting

That looks really good.

Very helpful. Thanks!

amazing!!

Nice video!

I got them. They look very good but poorly made. My right side wasn't sealed properly so water leaks in and looks smudgy inside. I tired to take it apart but it's sealed so tight I can't fix it. Have no choice but to live with it. Worth the money though because it really ups the look of the car by a big margin

Thanks

I put the headlight in but didn't put any of the screws or bolts or the bumper back on yet because I wanted to see if all the lights would work. The low and high beams work, the only thing that doesn't work are both the turn signals on both the headlights. Also I only put the first headlight in not the second one yet so I thought it was weird that both turn signal didn't work on the new headlight and the old one still in the car. I didn't know if I needed to put everything back together first for it to work or what. Please help

Where can I get those plastic clips? I realize you said to replace them. Do those clips come with the purchase of the lights or are they sold separately?

I installed everything, but my LED strips are not working only my headlights and blinker work? what do I do. i just plug and play everything as shown in your video.

I want! I need! And most of all, I shall get!

So for this installation l, do I have to do everything in the wiring installation video as well?

Are these headlights still available?

Hi bro, would I be able to use the adjustment switch inside of the vehicle with these aftermarket headlights?

donde puedo conseguir ese tipo de faros para mi mazda 3 del 2010, gracias.

@Specdtuninginfo

9 жыл бұрын

Luis Sánchez los pedes encontrar en www.k2motor.com/

Is it possible to upgrade the H11 halogen bulbs to H11 HID Xenon bulbs (with a conversion kit) after installation or is it not recommended with this housing? (my Mazda 3 has stock halogen bulbs btw)

@Specdtuninginfo

9 жыл бұрын

Eric Y. The headlights are HID compatible and the lighting can be upgraded without damaging the projectors or the headlight lens.

@ericy.2108

9 жыл бұрын

Spec D Tuning Neat. So upgrading to HID won't result in worse cutoff or other adverse effects? What is the color temperature of the halogen bulbs this comes with and is it brighter than OEM halogens? Lastly, are these headlights set up for asymmetrical (RH traffic) beam pattern?

@WIDGET738

8 жыл бұрын

+Eric Y. No, in fact the cutoff with the HID upgrade is awesome! It's a super sharp cut-off... Much better than the stock halogens.

Question? Is this the same install for a 2010 mazdaspeed 3? Are the fitments the same? Just plug and play? Thanx in advance

@Specdtuninginfo

9 жыл бұрын

James Fernandez The headlight fitment is all the same. If your vehicle has a stock Xenon bulb or HID kit from the manufacture then the connect will not fit. Your vehicle must have halogen headlights.

Is this the same procedure for a 2014 mazda 3 hatchback?

@Specdtuninginfo

9 жыл бұрын

Pedro Cortez Yes, this video should help you with the sedan and hatchback.

Can I adjust lights for RHD as I live in United Kingdom?

@Specdtuninginfo

8 жыл бұрын

+Patryk Czeszyk No, unfortunately the headlights are only made to sold to fit LHD vehicles only.

so if my stock head lights in my mazda 3 are Xeon bulbs the conector won't fit?

@Specdtuninginfo

9 жыл бұрын

Tyler Dahn Yes, the headlights will NOT fit your connect if your vehicle has HID bulbs from factory.

@tylerdahn1787

9 жыл бұрын

what do i need to do to install them then?

@Specdtuninginfo

9 жыл бұрын

Tyler Dahn We tell all our retail stores to emphasis that these headlights will NOT fit the stock xenon/HID from factory headlights. There is no conversion plug or wiring harness.

When do the DRLs turn on like at 19:16 with no other lights on? With engine on?

@Specdtuninginfo

9 жыл бұрын

28Levels The lights had a constant power straight from the battery as the vehicle was only used for installation.

@Specdtuninginfo

9 жыл бұрын

28Levels The lights had a constant power straight from the battery as the vehicle was only used for installation.

@28Levels

9 жыл бұрын

Spec D Tuning So in reality, is it possible to have only the LED strips on? I'd really like to put LED daytime running lights in my Mazda 3.

@Specdtuninginfo

9 жыл бұрын

28Levels Yes, you can take the lights to a stereo shop and they can wire the LEDs onto a switch and straight to the battery power. You can then control the LEDs yourself.

Are these xenon headlights or halogen?

@Specdtuninginfo

9 жыл бұрын

Andrew Devall These headlights are equipped with H11 halogen bulbs.

Work on a 2012 mazdaspeed 3?

@Specdtuninginfo

9 жыл бұрын

Ryan Smith Yes, so long as your vehicle has halogen headlights the connector will fit.

Where do I find a link to these headlights for sale, I live in Toronto ontario

@Specdtuninginfo

9 жыл бұрын

drybreath You can find them on www.k2motor.com they sell all our products. The item number for headlights is 2LHP-MZ310JM-TM.

no Mazda 6 2010 this sucks

no Mazda 6 2010 this sucks