How to Remove Carburetor on a Generac GP5500 Generator

Тәжірибелік нұсқаулар және стиль

How to remove the carburetor on a Generac GP 5500 watt generator.
How to remove the carburetor on a Generac GP 6500 watt generator.
Tool to help remove fuel line. Fastener Clip Removal Tool. amzn.to/387tOF6

Пікірлер: 13

  • @jber9569
    @jber9569 Жыл бұрын

    Great video. You are always concise and to the point. Wish everyone did them that way.

  • @JohnsonsSmallEngines

    @JohnsonsSmallEngines

    Жыл бұрын

    I'm glad it was helpful and thank you for the kind comment!

  • @deathsjussmadd
    @deathsjussmadd2 жыл бұрын

    Precitae it bro reallu needed to see that spring over the rod for the trottle thanks

  • @malikrameez703
    @malikrameez7033 жыл бұрын

    The small engine work was very tuff in one hand bro

  • @JohnsonsSmallEngines

    @JohnsonsSmallEngines

    3 жыл бұрын

    Born without my left hand. If I can do it, you can too!!!

  • @jonathantx
    @jonathantx2 жыл бұрын

    Great information, thank you very much. What did you use to lift generator??

  • @JohnsonsSmallEngines

    @JohnsonsSmallEngines

    2 жыл бұрын

    I’m glad the video was helpful. I used my electric lift made for walk behind lawn machines. I work on lawn mowers, generators and tractors full time so I need to have a lift. I don’t like working on the ground when I work on many machines a year so a lift is a necessity. I’ve had it for many many years and it has been a back saver!!

  • @jdkassociates912
    @jdkassociates91210 ай бұрын

    Very clear, very easy-to-follow. Would the same procedure apply to my GP8000E?

  • @JohnsonsSmallEngines

    @JohnsonsSmallEngines

    10 ай бұрын

    It should be close other then you may or may not have a fuel shut off solenoid on the carburetor on your model.

  • @ckirasic
    @ckirasic2 жыл бұрын

    Great video. Where can I find the video of cleaning the carburetor?

  • @JohnsonsSmallEngines

    @JohnsonsSmallEngines

    2 жыл бұрын

    I do not have one yet but if you take it apart and it smells like turpentine, just order and install a new one.

  • @GirlCarpenter
    @GirlCarpenter2 жыл бұрын

    Great video! Thanks!! So I had rust/water in my tank due to a bad seal on top. (Bad fuel gauge) I’ve removed that original tank and Im working through the carb, new fuel lines, filter, etc to get it up and running. Do you know if there is there a way to fix/salvage that tank?

  • @JohnsonsSmallEngines

    @JohnsonsSmallEngines

    2 жыл бұрын

    If the tank can be flushed and you can get all rust flakes out then you can re-use it but if not then replacing is what we do at the shop. I cannot afford to have any rust come off of the tank and ruin a new or rebuilt carburetor. It can get a little pricey but a lessen learned that you will not let happen again. Thank you for the kind comment! Please give this video a thumbs up to help my channel. It would be greatly appreciated. Thank you for watching and I’m glad it was helpful.

Келесі