How to remove an automatic transmission 00-06 Sentra Nissan
Автокөліктер мен көлік құралдары
REINSTALL transmission video: • RE install the transmi... The auto trans stopped working with an accidental neutral drop! (accidentally moved lever to N while taking off on a green light. Then pushed back to D while the engine was revving.) This BROKE SOMETHING!
SO HERE IT IS: This is how to remove the transmission off a 00-06 Sentra 1.8l
Пікірлер: 54
I watched your videos and replaced 2005 Sentra transmission with success! I even went to the same shop in Ontario CA to pickup a used transmission. Thank you for sharing!
@BTKKILLER1
5 жыл бұрын
How much did it cost. And do they ship to
Videos like this just makes me more confident on doing it myself thanks a million👍
well done and thanks for posting this informational video. I'm researching an engine and tranny rebuild on my 02 sentra and thus helped a ton. keep on wrenching!
Wow was look for this video and now I can replace my 04 Nissan Sentra thank you I'll update on the work
Thanks Gilbert! You saved me over a grand.
Thank you very much, you made it look easy, i will be following you're instructions
Very good narration. I liked your video...
You earned a sub sir, good on ya m8. Cheers
Awesome video 📷 man😎 Stay blessed Thank you for sharing this content with us
thank you for your video im a rookie and i enjoy working on old and new cars one day im be a master
Hey hope your great ! I have a 1998 sentra, I shift into reverse it works perfectly, but when I shift into any of the drives it won't go, but at times it does catches drive, and then it's perfect till I turn the car off. When I turn it back on it does the same again some time I just put it into drive and accelerate really soft and it catches drive and then it runs perfect again, thanks for your help!
Awesome video Gilbert. I wanted to ask you how high did you jack up the Sentra? Is it over my jack only goes up 18 inches. Will I need to buy a jack that lifts higher?.
You are the best, very detailed, I'm about to change my transmission in my 2002 altima. Could you help me out with a link to any other useful information?
Good job brother 👍🏼
hey thanks alot i never did a motor on this sentra i already disconnect everything right now my last step is the flex plate bolts i thought whole engine and tranny came out but no they dont.... lower plate removal is on the way
Gilbert, I think I figured it out, more to come soon. Need to do some testing.
Amazing skill level.👍
Hi Gilbert,Can you please tell me something that has been bugging me.The radiator hoses on this 1.8L Nissan Sentra are weird. The hose coming from the Thermostat Housing goes to the bottom of the radiator???? The hot coolant coming from the engine should go to the top of the radiator to get cool down and return to the engine. But on this engine the hot coolant goes to the bottom hose
Awsome video thanks for your help I got a few questions though do you mind contacting me with a safe way of us having a bit of a q and a
Please, I own 2004 Nissan Sentra. The transmission over heats and stops when I drive for a while. I have to let it cool down before car starts. What is the problem?
HAHA... You are funny! As of now, I'm still puzzled for what actually killed my trans. It was just a little accidental neutral drop! POS.
@iFailGames
5 жыл бұрын
That's quite weird indeed. Neutral shoudn't damage much... I think. Last winter though, I got stuck in snow, and was switching between Reverse & Drive, and the car wouldn't move, and in my frustration, I decided to put the car in Park, and forgot to press the brake pedal. From Reverse into Park, no brake pedal held down, and the car made a loud screeching sound like it's dying. I thought the transmission was done. When we got the car free, the transmission was surprisingly still good...
Nice
It is much easier to take out the motor and the transmission connected to it in one peice and then separate the transmission to replace it
HI, How did you transport the tranmissions? I mean put it and take it out of the truck? Did you use a car engine crane?
@fueledbymusic3
8 жыл бұрын
I put it in the truck myself. I basically picked up the trans myself. I was strong enough. but it is better to have someone help.
@BTKKILLER1
5 жыл бұрын
@@fueledbymusic3 why did he use the hammer on the rack and pinion?
@jose11234567898
5 жыл бұрын
btkkiller1 that was the axle, not the steering rack. He used the claw on the hammer to pry the axle out of the trans. There’s a small snap ring that holds the axles in and they need a little leverage to pop the ring out.
what do you think about nissan altima 04 transmission pull it out from the bottom or from the top? of the car help me out please
@BTKKILLER1
5 жыл бұрын
Bottom is always best.
Hi Gilbert, I have question. Your reply will be greatly appreciated. My Nissan Sentra 2010 ctv transmission lost power while going uphill. It only works reverse but absolutely no power in drive. Engine stalls when giving throttle but shows no sign of acceleration. What is the likely problem? Am I gonna need a new transmission?
@fueledbymusic3
7 жыл бұрын
cvt transmissions I dont know much about. Those use a pulley system and a belt.
@shahbaztalpur3862
7 жыл бұрын
Gilbert Arciniega thanks for the reply.
@BTKKILLER1
5 жыл бұрын
Your cvt is shot
After doing this, I replaced it with a 6M/T Spec V transmission...didn't want to hassle with another Automatic. Found out there was a TSB for Nissan for NOT perform Transmission flushes...they did at my local dealer (South Colorado Springs) and that led to my 4A/T messing up...called Nissan, they didn't want to own up to it
@azhule4041
3 жыл бұрын
Sorry for such a late question, but may I ask how you did it? I've seen it done on miatas and other sports cars, but I have a sentra sitting in a back yard, auto trans died and I plan to make it a project car. That was my first step and I would like info if possible. Thanks if you do decide to read this
Were there three motor mounts in total that you had removed? the front the rear and the one above the trans?thanks and regards
flywheel = Manual transmission flexplate = Automatic transmission
Hello Gilbert. will I be able to perform the similar procedure if not the same one on a 2008 nissan altima? I hope i get a reply thanks! Great Video Also I watch ed the entire thing
@fueledbymusic3
7 жыл бұрын
James Acar all cars are pretty much the same way of doing the job. Remove things in the way. Then remove things attached to the trans. Likely the same
@TheHallamake
7 жыл бұрын
Gilbert Arciniega thank you for the quick reply
Do you think it was the automatic transmission oil pump
@fueledbymusic3
8 жыл бұрын
+acxx4 I really don't think it was the oil pump. To this day, it's a mystery on what exactly happened to the old trans
What size is the axel nut plz and thanx
@fueledbymusic3
6 жыл бұрын
Cyril Conard if I can remember. I believe it was 21mm. Not for sure though
they said at nissan that there's a belt in the tranny, work like a cluch on a snow mobilelike a variable speed belt that breaks! ALSO: why did you delete my last postings?to refill a completely dry tranny it's 6-3/8 US qts.
@BTKKILLER1
5 жыл бұрын
So 6 quarts on a 1.8 nissan sentra sv
@BTKKILLER1
5 жыл бұрын
Cool
Hey so u didn't need to do anything to the engine
@fueledbymusic3
6 жыл бұрын
Jasmine Clerk to work on transmission? No need to do anything on engine
hey thanks alot i never did a motor on this sentra i already disconnect everything right now my last step is the flex plate bolts i thought whole engine and tranny came out but no they dont.... lower plate removal is on the way
hey thanks alot i never did a motor on this sentra i already disconnect everything right now my last step is the flex plate bolts i thought whole engine and tranny came out but no they dont.... lower plate removal is on the way