BRILLIANT! One of the most creative solutions to a problem I have ever seen on KZread! More entertaining than the video itself was watching your thought process!!

@mtb1340

9 ай бұрын

Wow, thanks!

I love it when you use what you have to get what you need done! U inspire me to use something simular to remove and replace the split ring on the sankestyle usa kegs! Thanks for sharing! ON on Brother!

Thank you. I'll be giving this a bash over the weekend.

Nice work. Didn't use your setup, but you gave the idea I needed. Cheers

Genius! Excellent example of divergent thinking! Thank you!

Great job, that's putting on the thinking cap!

This is next level brilliant!

Fantastic, real lateral thinking and application. Thank you!

@mtb1340

11 ай бұрын

You're very welcome!

NICE WORK, MANY THANKS

Awesome video, I made your make shift caulk gun with ratchet extension and clamp with rags.. took my time, very slow and didn't shoot any beer out, just air, very easy to do and very helpful video.. getting that ring off was the hardest part

@mtb1340

Жыл бұрын

Thanks for the great comments and for Subscribing.

It’s really working, I do my first keg whit the 2 screwdriver but it’s hard , whit this ,, tool it’s very easy , well done Mr 🤝🍺

Awesome hack, thanks, looks much safer than shoving screwdrivers in! I'll use this today, thanks!

M.Ate .your the man...cheers

you sir are a genius.

Fantastic vid, thank you. Just not long spent an hour in the shed trying to take the same out. Watched your vid, did the same with the silicon gun and two minutes later it was out. Just need to buy a new gun now !! Thanks again.

@mtb1340

3 жыл бұрын

Glad I could help.

Great video thanks for sharing brother

You sir are a star

This is genius mate, cheers. Needed to repurpose a keg and couldn't figure out why I couldn't get it out

@mtb1340

3 жыл бұрын

Glad to help

Great video -- Well described, easy way to remove the keg valve. I'll use your technique when loading kegs with my home made hard cider. This process will easily allow me to carbonate my cider using the CO2 system for the kegerator. THANKS!

@mtb1340

Жыл бұрын

Thanks for the great comment

great stuff - thanks

Fantastic work a treat 👏 thank you

@mtb1340

Жыл бұрын

Thanks for the comment 👍🏼

Clever way to open a keg. Thanks

Very helpful thank you

Wow, easy, thank you

Good idea, thank you

Brilliant, many thanks,

Excellent!

There’s children in Europe going to bed sober and you’re wasting beer😂

Brilliant!

Usually the S-type have a circlip stopping unscrewing of the main body when using a lug. There may be incuts around the top rim for removal of the circlip, but I managed to have one withoout this cut ins - I had to make my own using a dremmel with grinding disk - complete PITA.

Awesome thanks 😊

Genius idea

That’s bang on 👍🏻

If you lay the keg on its side before de-pressurising, presumably the spear would be out of the dregs so wouldn't spray the beer out.

Nice!

About to attempt my first Thank you for now lololol

This was excellent. Thank you! Do you know if Asahi kegs have the same/similar type of valve? (And if your method would work?)

@mtb1340

Жыл бұрын

Sorry I don't.

Different systems in Europe and North America, as far as I know. The American ones are retained by a split ring. Screw driver isn't too bad a tool to remove a split ring _as long as you've depressurized it by pushing down the ball_

genius!

Awesome thinking, Sir... Rather than having to mess with the socket adapter and clamp system, you could just cut the two (blue) frame rails short enough for the rod to protrude the proper distance... Drill a small hole in the end of each rail and affix a 2 1/2 inch hose clamp or better yet, a thumb-screw style clamp to the end of the rails with pop rivets through the holes... Just clamp your tool on and pull the trigger. 🙂

@mtb1340

Жыл бұрын

Great idea I like that. Thanks fir the comments 👍🏼

@_Common_Logic_

Жыл бұрын

@@mtb1340 - You did all the brainwork... It's always easy to add two cents worth after the heavy lifting is done. 😉

@mtb1340

Жыл бұрын

And that's how we evolve 👍🏼

Mate .Australia thanks you.

@mtb1340

2 ай бұрын

Glad to help

@jesteronetime

2 ай бұрын

@mtb1340 mate the reason I comment is because I did comment a while ago.and I've used and showed your technique and I swear you have saved many fingers stichers. And totally destroyed kegs through your vid..cheers

If you put the keg On its side will that beer still come out?

far too messy there at the start lol. Put the keg on its side - voila, no beer escapes and the gas escapes in about a minute. In fact, it really is easy to jar a big screwdriver in to do that bit.

If you depressurise on its side or upside down then beer won't come out.

You sir are a star! I’ve had a beer keg knocking around for a while and didn’t know how to approach removing the valve. Love your technique. But I’ve got a problem…. I’ve discovered the keg I got has a micromatic (A-type?) valve. It’s too wide for the cut down sealant gun. So tried clamping a piece of 18mm ply across the keg, with a nut set into the underside of the ply, then wound a big bolt in to press on the centre of the valve… but I bent the wood! 😳 Any idea how to depressurise and dismantle this style? Thanks 😊😊

@mtb1340

9 ай бұрын

Hi and thanks for the comment. Thinking about how you can depressurise the keg, sticking with your current set up, can you change the wood for a metal rod, DIY shops (B&Q) sell them. Hope that helps.

Thanks for the video... I've tried this but unfortunately to no avail. Perhaps I'm doing it incorrectly. Please can I ask - do you need to press in the centre (beer) valve or just the outer ring?

@mtb1340

2 жыл бұрын

You need to press down on the centre of the valve.

@neotropos

2 жыл бұрын

@@mtb1340 many thanks for this. So the 'bullseye' right in the middle? Might be where I've been going wrong! Cheers 🍺

Ill be filling my half barrels very soon now bc of this video forget pony kegs lol

Hi Where I can buy the same keg you got on the video 50l with thread around the valve please? Thanks

@mtb1340

2 жыл бұрын

I was given mine, try ebay or something

I just got 2 I want to use as a piggy bank. Good idea?

Any one can answer this question? If you take the vale out can you put water in and use it as a water dispenser once it’s open

@mtb1340

Жыл бұрын

You can fill it with what you want, but you will need the correct connection for that keg and some form of air/gas to push the liquid out.

Hi mate i got question how much u put PSI to this keg carbonate the beer this is exactly this same like Cornelius keg ? Thanks

@mtb1340

3 жыл бұрын

Hi Pete, I didn’t pressurise the keg prior to the video they come like that, the video is showing how to remove the pressure safely. Hope that helps.

@stephenjebb5576

2 жыл бұрын

Same as any other keg.

When I push down on it, the springs just spring back up and nothing changes been at it for over 2 hours, frustrating the bollox off me hahaha

👌

Where did you get the keg ? Where should we steal them from ?

@mtb1340

Жыл бұрын

Hi, I found mine out the back of a bingo hall. You will find that most of them are owned by the brewery and want them back.

1 You could put the keg on the side to avoid liquid to flow out while releasing the pressure. 2 I'm pretty sure there is a tool to get this job done, perhaps the pouring tap will work?

@mtb1340

3 жыл бұрын

Thanks for the comment, I'm aware there's a tool to do the same job as my video shows but this is a cheap and quick alternative to buying the more expensive tools.

@alexandrevaliquette1941

3 жыл бұрын

@@mtb1340 Be creative and get things cheaper is my motto for sure! If you use the keg for beer, I guess you have the tap, no? Can you use the tap to release pressure? Then, take your screwdrivers to loosen up the valve, and finally, use the tap again to release the notch and pull out the valve? If you don't have the tap, how do you use the keg?

@mtb1340

3 жыл бұрын

@@alexandrevaliquette1941 the video is a guide not a rule. The video is to give you a choice, a different way, a different tool to complete the same task.

@louisejackson8770

3 жыл бұрын

The pressure in the keg/barrel as they are called in the UK pub trade is to great and it will still shoot out even on its side. I've been on the receiving end of a barrel connector not going on correctly and ended up having a John Smiths shower lol. The type of barrel that is you would need a proper connector which would then go to a pump like you have in a bar. Unless you modify the barrel to take a tap?? But all in all a very good and informative video.

@alexandrevaliquette1941

3 жыл бұрын

@@louisejackson8770 If the barrel is 99% empty, it make sense that putting it on the side will spray less liquid than letting it in the vertical position. Anyway, I'm just a random dude with no experience with keg and honestly I don't even like the bear nor the alcool. So, I've no fkn idea what I'm doing here! Still, thumbs up for the video and peoples sharing positive comments! Cheers from Montréal, Canada

What size was that extension ? 1/2 inch ?

@mtb1340

3 жыл бұрын

Hi, yes it was.

What a waste of good beer! I homebrew and refill sanky kegs. Never needed to remove the spear. Just use the coupler to de-gas, clean and re-fil.

@mtb1340

2 жыл бұрын

The beer was very old and not mine otherwise I would have drunk it. As for rhe removal of the valve its more for the purpose of reusing the keg for other things. Thanks for watching.

Amneysing

@mtb1340

3 жыл бұрын

Thank you

Sunshine wouldn't be so easy in Australian keg😂😂😂

Polish 👍👍👍

You should patent your idea 😁

I hate waste Ide of got a pint glass 😂

@mtb1340

3 жыл бұрын

You wouldn't if you new how long it had been in there.🙈

You left beer in the keg.....thats alcohol abuse!

@mtb1340

5 ай бұрын

Risky when it had been there for weeks