How To Remove A Garage Door Openers Wall Control
Тәжірибелік нұсқаулар және стиль
Simple video on how to change a garage door openers wall control.
Some people may not know how so I hope to cover a lot of information even if some videos seem super basic.
Wall control in video: amzn.to/2JJrg2i
Assorted wall controls: amzn.to/2ANyOy0
Parts page: www.garagedoorguidance.com/ga...
Thanks for watching and hope this helped ! Don't forget to subscribe (:
Tools you might need / Tools I Used:
Makita impact driver - amzn.to/2rtIE2H
Screwdriver bit set - amzn.to/2En9aTX
Reversable screwdriver - amzn.to/2L7AtSP
Пікірлер: 28
Thank u so much
Thank you!!
Thank you
Thanks
Muchas gracias por el vídeo lo andaba buscando hasta que lo encontré
Thanks!
Thanks.
Does this device on the wall require batteries? Or is it plugged from behind?
@GarageDoorGuidance
2 ай бұрын
Usually hard wired to your opener
Is it possible to relocate mine, it's a bit higher than it needs to be. I unscrewed it and there's this metal frame that it's screwed to. It's not a box, it's a square metal frame
@GarageDoorGuidance
3 жыл бұрын
I’ve never seen a metal frame for one before, it should just be wires back there than you can easily splice and add length to.
I have an old Wayne dalton garage door opener. My remote works the device, but the wall mounted piece probably needs a new battery. How do I get into it to change the battery?
@GarageDoorGuidance
2 жыл бұрын
If it’s a Quantum, you need to use a flat head screwdriver to pop the cover off
@vickirushing8298
2 жыл бұрын
@@GarageDoorGuidance Thanks, it worked.
How do you replace the exterior keypad and how do you know which model to buy in 2023 if you have a much older model installed?
@GarageDoorGuidance
9 ай бұрын
It would really depend on what you have there. If it’s older than 25 years chances are you’re better off buying a new opener with a keypad in the box
For some reason mine isn’t flashing the yellow light, the garage opens and closes but only with the panel outside
@GarageDoorGuidance
2 жыл бұрын
Panel inside the garage that is wired not working?
Mine stopped working last night after a power outage. Thoughts?
@GarageDoorGuidance
2 жыл бұрын
Logic board likely, a lot of the times they’ll get burnt out with the surges. ( logic board on the motor, unless everything else still works )
@jhabner1234
2 жыл бұрын
The door works with remotes. There is a flashing yellow light on wall mount but it won’t operate the door. I tried to pair it using the button but it didn’t work.
@GarageDoorGuidance
2 жыл бұрын
And this is the same button as in the video correct ?
@jhabner1234
2 жыл бұрын
Well, Liftmaster, but looks the same otherwise
@GarageDoorGuidance
2 жыл бұрын
I would try to swap the wall control. Amazon has them and worst case you can just return it
I need some assistance, what would be a good way to message you?
@GarageDoorGuidance
10 ай бұрын
Gargedoorguidance@yahoo
I wish you just got to the point! I just wanted to see that hidden screw
@GarageDoorGuidance
2 жыл бұрын
Sorry. What can I say it was hidden..