Thanks for the tutorial. I relaced my CCM Eflex 3.5 with a floating T last night, including the middle part of the double T. I can't wait to try it out for my dek hockey session tonight. Just throwing a ball into it, I can see a big difference from the factory lacing that was very stiff. I wouldn't recommend that glove to anyone, but I managed to get it with the blocker for $300 (Canadian) two months ago to replace my 10-year-old gloves, so for that price it's alright.

Thanks for the video! Just converted my glove.

The floating t part was what I wanted to see done.

@VOGoalie

6 жыл бұрын

Yeah, I know I missed the best part with my footage! Basically, once I got both sides done, I had a small gap between them. I just creatively weaved the two sides together with the only goal to close the gap and end the laces on the back of the spine. (Pretty much using the same looping patter of skipping one then through the second and third loop but using the opposite side lace instead) It sounds complicated, but once you reach that point, it's not so hard to figure out.

@texagunsmoke

6 жыл бұрын

VOGoalie thanks for the reply

@magictooth2

5 жыл бұрын

You can tie the two sides together however you like, as long as it's solid and looks good enough for you :)

Just replaced my sons G2 with a G4 and it came with a hockey lace. Looks good.

@VOGoalie

5 жыл бұрын

Awesome! Yeah, the new G4 has a skate lace option. My Warrior factory red skate lace G4 looks great. Thanks for your comment!

Thanks you! This was very helpful

Very helpful video. 🤘

Hey dude, absolutely love the tutorial, I was wondering if you will be doing a video of the Floating T where you're battery ran out on this video as its the part that I'm unsure on how to do this & I can't seem to find any other videos that show this. Much love from across the pond 💚👌

Beauty video. just did my Bauer S29 last night and what a huge difference, its a bottomless pit now. I was gonna drop it off at my local shop but decided to give it a shot myself and glad I did. Keep the great videos coming bud, lovin'em.

@VOGoalie

5 жыл бұрын

Thanks man! Glad this video helped! Modding your gear yourself can be daunting at first, but is super satisfying when you finish! Thanks for your comment!

@amieesposito3878

3 жыл бұрын

My son has an S29 I'm going to attempt. Any more guidance here?

@rhyno_of_the_north

3 жыл бұрын

@@amieesposito3878 honestly just watch the video and do as he does. It’s a bit tricky at first but once you get the hang of it it’s easy peasy. My only suggestion would be once you get the knots tight dab a bit of super glue on them to them potentially coming lose.

@amieesposito3878

2 жыл бұрын

@@rhyno_of_the_north sorry I missed your previous reply. I circled back to this.... as I'm actually thinking of following through on this. Was super scared before. How long would you say it took? Did it help with the open/close (flappiness) of the glove?

Wayne could you please do a slowed down version of this on your g4 glove

Nice video, I'd also recommend that you take a lighter and use that on the end where you cut off the skate lace at the end. That will help so it doesn't fray.

@VOGoalie

5 жыл бұрын

Thanks for your comment! Yes, I think I totally forgot to mention to burn the ends! Thanks for the reminder!

Nice video! Thanks

@VOGoalie

6 жыл бұрын

Thanks! Glad you liked it!

Great video

@VOGoalie

6 жыл бұрын

Thanks for your comment, glad you enjoyed!

You mentioned trying this floating tee mod on your G4. Are you still considering this? :) I got my first good skate with the new G4 glove and bauer 1x chesty yesterday, what a difference! Guys were firing rocket slappers into that glove and it held them like it was a puck magnet! I wish I had video of it, I pulled the fattest '80's kick-the-left-leg-out-and-looking-up-while-robbing-a-huge-slapshot-with-a-windmill-glove-save on this kid with a heavy, accurate shot. So much fun!

@VOGoalie

5 жыл бұрын

Awesome! Busting out the Windmill is always sweet! I don't think I'm going to do this on my G4, but I've used this relaced glove and its a total vacuum! Thanks for your comment!

So doing that to my gloves when I get home! Thanks for posting this video. You made this look easy!

@VOGoalie

6 жыл бұрын

Sweet! You're welcome! The whole process may seem daunting to some, but really, once you get a feel for it, it's not too complicated. And if you make a mistake, you can always undo and fix it! Hope it helps your game!

Can you do a video on floating vs. single vs. double, vs. triple tee?

Hey Wayne! How do I do the floating T in the Warrior G series? There’s lace going through the end of the T that looks like it’s part of the binding. Just curious if you just remove them?

Do you use 1 lace or a pack of 2 laces for the whole thing?

I think I'm blind d because I cant find the anchor lace on my G4. It's either tu ked way in or it has a different lacing system. Would you do a G4 glove skate lace video?

I used to have Battram equipment too but went back to mainstream manufacturers. I found the catch glove didn’t close like Vaughn or CCM - pucks would squirt out occasionally.

Looking for a video on how to relace a goalie glove with shake lace for a double tee glove

Do you have to use a lace? Or can you use the kind of string it comes with? I personally hate the way the lace looks on my glove

I just wanted to change the color of my pocket to better match my red and white Premier 4 pads I've now found out that are unfortunately too small for me. I just ended up retracing the stock lacing with red wax lace. Granted now seeing this and how big you you can make your pocket I kind of want to try this. I'm not entirely enthralled with CCM r1.5 pocket design when compared to other gloves.

@VOGoalie

5 жыл бұрын

Yeah, pockets can be such a personal thing. I like mine like a black hole where nothing comes out. But some like an anchored tee to help feel the puck. The best part is you can always try it and go back later!

@KB9813

5 жыл бұрын

@@VOGoalie My thing is that the 1.5 pocket just look smaller when I compared it to other gloves.

Followed this to redo mine this weekend. Sent you a picture on Instagram if you’re interested in seeing it.

I have seen on other forums that people say pucks can get through after switching to laces. I just did mine (thanks to you) and left pretty loose because I really want a deep pocket. Have you ever had an issue with pucks sneaking through?

@VOGoalie

5 жыл бұрын

I have never had a puck break though a pocket (and I've re-laced 7-8 of them). As long as it's tied off, you should be good to go!

Does it take two 120 laces or one?

Can you do a normal speed video on how you lace the web? I couldn’t see how it was done

@rinkfullofhighlights2960

4 жыл бұрын

Robert Goaltending just play the video in the slowest play back speed

hey bud will you explain how to pick a puck up off the ice with your glove hand like the pros do no problem????

@mckenlysetser3481

5 жыл бұрын

Its simple put you glove over the puck and make sure you can see the puck through the web then in a fast motion go to the left or right what ever direction you like as your going in motion away from you turn your had up fast the forse should have the puck scoop in the web. Its very simple.

@TheOTHERFish88

5 жыл бұрын

Mckenly Setser thank you so much I will try it next time I’m on the ice

How would you do the end if you don’t want to convert to a floating tee

@VOGoalie

6 жыл бұрын

On most gloves, the end of the Tee is anchored to the glove with nylon cord that's separate from the pocket lacing. Sometimes it's hard to see, but each side of the pocket should be a separate length of lacing. To keep the Tee anchored, you should be able to just unlace the pocket sides. My recommendation is to untie the lacing (rather than cut it) when you start to be sure. That way, you can always retie anything you want to keep. Thanks for your questions!

Is it the same process for a double tee pocket ?

@VOGoalie

6 жыл бұрын

It really depends on your double tee glove. The basic premise is the same, but depending on how your double tee is anchored and the spine hole pattern, it may take some creative weaving to close the pocket for a floating tee mod. Really though, as long as the lace runs through the binding lacing and the spine holes and there are no large holes (for a puck to fit though) you should be ok. Thanks for your comment!

Thanks for the trigger warning I watched this without having a siezure about you cutting the glove

Where do you live because I need to learn from you

Sweet Battram glove! Scotty makes amazing equipment. Remember when he started from the his parents basement down the street from me. Still true to his Woodstock roots and super quality goal equipment!

At the beginning of the lacing, you should've made it at normal speed so we can see how you are lacing it easier

What are the pros and cons of this style?

@cnd-snipez2718

5 жыл бұрын

None

Can you do this with 108” on a ccm p2.9 int??

@VOGoalie

5 жыл бұрын

While I don't have an INT glove, it may be possible with a 108" lace. But the floating tee does take a little extra length, so if you can, a 120" would be a sure thing. Good luck and thanks for your comment!

@magictooth2

5 жыл бұрын

I've done a Sr Bauer s170 with 108" lace

What are the advantages and disadvantages of a floating T ??

@G_3011

6 ай бұрын

There’s a deeper pocket making it so that pucks don’t bounce out as easily.

I want to make a floating T on my CCM Eflext 2 760 glove, but it seems like the T is connected with the lacing that holds up the whole glove together. How do I remove the T from the lacing without ruining the whole glove?

@VOGoalie

6 жыл бұрын

It may be there is a separate lace anchoring your T. I don't have a CCM Eflex2 myself, but on my G4 glove, there is the perimeter lacing that keeps the glove assembled, then there is a separate piece that is laced by the T to anchor it down. For me, it's identifiable because I can see the two ends (which are knotted and visible). It may be the same case with your glove, but that being said, you might need a lacing needle if you undo any factory perimeter lacing. A lacing needle would let you easily relace anything you undo. If you're every unsure, take reference photos or a reference video while you are undoing lacing, so that you can always refer back when reassembling.

@ArtursJ

6 жыл бұрын

Checked my glove again, unfortunately i can't find ANY knots what so ever. I'm really scared to cut it, tho i got 120 inches of original lace so if i do mess everything up I can relace it. Hopefully.

@ArtursJ

6 жыл бұрын

Update: I cut the lace that was connected to the T in half. The lace is part of the perimeter lacing, but since i cut it in half I pulled it out of the T and there were 2-3 inches on both sides so i tied a knot. In short, I didn't mess up my glove and my day. Now tomorrow I'm gonna get skate laces and relace the pocket. Anyways, thanks for the reply, love your channel!

@VOGoalie

6 жыл бұрын

Awesome, glad things worked out for you! Half of the [fun] is figuring out how certain mods work with your specific equipment. Let me know how you like the floating T when you get it laced up!

@ArtursJ

6 жыл бұрын

Just laced it up. Already like it a lot and looks like the puck wont pop out when i catch it. Definitely will be doing this for every glove I buy. Thanks again!

I have to put this on my glove

@VOGoalie

4 жыл бұрын

It's definitely work trying out! Whenever I use this glove, it's like a black hole!

@bobjeff5058

4 жыл бұрын

@@VOGoalie would it work on a bauer vaper glove with a hybird tee

i need to relace the finger side of my vaughn velocity 7400 glove could you help me out with that?

@VOGoalie

5 жыл бұрын

Thanks for your comment! While I've never redone the perimeter lacing, there are a few resources out there. Contact Bay Area Hockey Repair (BAHR) if you need to send it out.

I just got a true 7x3, it comes with an offset T and I’m wondering if it still works?

Nice lacing job! .... but personally not a fan of floating tees.. It makes the top of your tee, the "bridge" less rigid and more prone to fold inwards on a hard shot. The tee is anchored for strength and overall structure of the glove... Un-anchoring it is like removing a load bearing wall in a house. Ever notice that most NHL goaltenders leave their tees anchored? ... It's a goalie glove... Not a bug-catching net :P

lol. i burned my old set after having too much moonshine. cut away my friend