In the tennis world, the original grip--the one that directly wraps on the handle--is called the replacement grip. Overgrips are those grips wound on top of the replacement grips. The adhesive tape that comes with the overgrips is called the finishing tape. Replacement grips and overgrips are wound on a diagonal on the paddle handle. The default direction is for righties. If you are a lefty you can wind the overgrip the opposite way so that it fits a bit more naturally in the hand. Most overgrips come from the tennis world and work perfectly for the pickleball world, with the exception of length (tennis racket handles are a half inch or longer than pickleball paddle handles). There are numerous overgrip styles including tacky ones, extra thin ones, extra absorbent ones, silky smooth ones, and ones with ridges or other types of textures.

Thank you for this video. I’ve regrouped a few now, and everytime I come back to your video so I do it correctly. Thank you 😉

Thank you! I just overgripped my paddle for the first time. Your video helped make it an easy process. Can't wait to test it out when I play tonight.

@PickleballKitchen

2 жыл бұрын

Awesome, thanks for checking out the video!

Great video, thank you! I've added an overgrip to make the handle thicker. Since I have arthritis in my thumb the extra thickness helps make it more comfortable to play.

Great video!!! I only wish I had stumbled on this BEFORE my first attempt! It did not come out bad but with your video it is much better! I am well on my way now, thanks to you, to becoming an "overgrip-ologist!" Thanks again and best wishes for your continued success!

Fantastic video. I watched your video twice, bought a 3-pack and got it right the first time. Now, I’ve got spares for the future 👍

slow and clear for us newbs. thank you. Why not start at the top and work down?

Thank you. Your instructions were perfect. Vincent

@PickleballKitchen

5 жыл бұрын

The pleasure is all mine.

wrapped my paddle as I watched you do yours.... thanks.

I'm just about ready to order my 1st Pickleball paddle and my last consideration is grip size. The paddle comes with a standard 4 1/4" size grip and I had played with some loaners from friends which I believe were using a standard size grip. I researched grip sizes on the Internet and found 3 ways to determine your grip size: 1) hold the paddle and see if there is a snug fit when you insert your other hands index finger between your fingertip & palm, 2) measure the distance between the middle crease in your palm to the tip of the ring finger, and 3) by height which is 5'9" and above should use a 4 1/2" grip. By all three methods, i should be using a 4 1/2" grip but I'm afraid this overgrip will increase the grip size. Should i buy the 4 1/4" ( been using this size from loaners anyways) and if i decide to overgrip it than it won't be an issue with it being too big? Anyone having this problem?

Success!! Thanks for your help, especially the trimming tip at the end, very helpful.

@PickleballKitchen

2 жыл бұрын

Thanks for watching my first video ever!

Thank you for a great video! Very helpful!

Thanks, it was very helpful.

Tiger Grip works real well .They are used on Baseeball Bats as well

Great video! Tks! Question: I watched a video about having "soft hands" at the kitchen. It said one of the ways is to increase the grip size (no elaboration given). The video said it helps prevent having to grip so tightly. Your thoughts. Also, it seems to me that the set up you do in this video makes for a softer feel anyway (I'm a former tennis player) but the way Ben Johns adds more extra material before the final grip wrap would that make for a softer feel because of more bulk. Thoughts??

Since you prefer to remove the manufacturer's grip tape when it wears out, can you make a video showing how to replace it? In this video, you mentioned that adhesive can be a problem. I'd like to see how you handle that.

Good information, however I was looking for a video of actually "re gripping" the paddle. Do you have anything like that where you remove the factory grip and re-grip with a new one? I'm not a real fan of the over-grip mainly because my hands aren't that big and I like to keep the overall grip size as small as I can.

@PickleballKitchen

5 жыл бұрын

Ah ok, I understand. So it's basically going to be the exact same thing as overgripping it. You just have to take the old grip off. Perhaps I will make a new video about it. Let me know if you don't find a video and I'll see what I can do. Thanks for stopping by!

Excellent video Barrett, thank you. I have a quick question for you: the grip size of my paddle is 4 1/4. If I remove the original manufacturer's grip wrap and regrip it with new tape, will it help in reducing the grip size? (4 1/4 is a bit big for my hand) I'm trying to make the grip smaller.

@PickleballKitchen

4 жыл бұрын

Thanks! Yes, it should. Especially if the original grip was thick. If you apply just an overgrip like I show in my paddle customization video, then it will reduce the thickness significantly.

Thank you very well done.

Awesome, thanks for posting...new subscriber. 🙂

@PickleballKitchen

Жыл бұрын

Thanks!

very helpful. thanks!

@PickleballKitchen

3 жыл бұрын

My pleasure.

Would you use a different product it you didn't go over the original grip?

@contourman6692

11 ай бұрын

If your remove the old grip and want a thicker grip you would first put some under gripping on to thicken the handle and then finally add the outer grip.

U are so amazing we love u

If doing an overgrip is a good idea, or should you, wash the old grip it’s going over? Not like soap and water but like an alcohol wipe or something to get dirk and oil off?

@PickleballKitchen

2 жыл бұрын

I would just do an over grip. I wouldn’t put anything wet on there.

@jeffoconnor1192

2 жыл бұрын

@@PickleballKitchen Thanks! Just tried my first one and it turned out way better than I expected. Video helped a bunch.

You didn’t regrip... you over gripped.

Can I use your video and paddle images for my blog? Thanks

@PickleballKitchen

2 жыл бұрын

Yes as long as you give me credit and link to my content. Thanks for asking.

Bought Gamma but was not tacky at all! They used to be.

@PickleballKitchen

Жыл бұрын

Keep in mind that this was my first video on the channel so it's quite old!

You have abnormally symmetrical/uniform and beautiful eyelashes. Also, your video was helpful, thanks!

Would you wrap in the opposite direction if left handed

@paddlepedalproductions5452

Жыл бұрын

Yes

What do you if the original grip is coming loose?

@PickleballKitchen

3 жыл бұрын

I would just take it off and put either a new grip on, or just use an overgrip.

Affiliate links to over grips?

@PickleballKitchen

5 жыл бұрын

I don't bother for the grips, but thanks for asking.

Have you ever taken off the original grip of a paddle.

@PickleballKitchen

4 жыл бұрын

Oh yeah, all the time. That's what I typically do.

This isn't 'regrip' this is 'overgrip'

you saved me from a botch job because I would have cut it perpendicular....

@PickleballKitchen

Жыл бұрын

Glad it helped!

Correction: I didn't watch closely, I did start from the correct side of the tapered end. --- Superseded comment: When you start wrapping the tape, it seems to me the tapering should be positioned the other way, with the inclined part at the end of the handle. You do the opposite. If you started as I just described, then you would not need to change the inclination of the tape.

@PickleballKitchen

4 жыл бұрын

It's been a long time since I did this video, but I think I wrapped it with the logo facing upright. Not sure though.

You doing it Backwards The slim part of the tape goes at the end

👎