You have saved our household xbox controller from the great beer spill of 2019.

@blackguy5593

5 жыл бұрын

Rip

@mrbussin8284

4 жыл бұрын

Hahahaha

I love listening to your videos whilst cleaning my controllers, you also saved me from buying a new one because I couldn't find a single video for reassembling. Thank you

My anger problems are turning me into a pretty damn good electrician

I couldn't for the life of me find how to put the sync button back in, so I appreciate this video.

you probably should of used an updated controller because my controller's bumpers are attached to the thing that's surrounding the home button

@bruhfr0g116

7 жыл бұрын

Prateek Patel same

@shingouki6392

7 жыл бұрын

Prateek Patel and what would he do for people using the old controller then?

@johnwauzynski8972

6 жыл бұрын

Shin Gouki I Have the old controller

@XboxDIY

6 жыл бұрын

I'll definitely take a look at this. Purchased a newer controller recently and too noticed it was significantly different. Probably like car models, these things get updated yearly.

@jackscaife924

6 жыл бұрын

Matt Dee pls do I dont know how to put the.bumper back on

Very helpful video. I highly recommend this guide to anyone who is trying to fix or customize their controller.

also for soldering very small wires, its HIGHLY recommended to use some flux, makes your job much much easier

Best guide on youtube on how to put it back together, thanks

thanks so much dude, i recently reassembled mine after cleaning it and the battery wouldnt work so i took it apart and followed your guide. IT WORKED SO WELL!!

You saved me $60 buying a new controller after I bought a kit to exchange parts from wish. They were too big and caused a whole bunch of issues try to reassemble correctly. Thank you!

Thank you! I completely missed this step following another video.

Thank you so much for your videos they have helped me so much with taking them apart, painting, and now getting them back together.

Thank you so much. I was able to fix my d-pad problems by changing the little sticker and I didn’t know how to reassemble my controller but this video did a very good job at showing how to do it.

Your guide was really helpful. I couldn't figure out the sync button after cleaning the inside of a controller. So thank you. Was a really helpful guide.

We had a right bumper arm that was cracked. With this series of DIY videos I was able to disassemble (with a flat head screwdriver), glue the bumper arm, reassemble (without breaking anything) and present it back to happy husband for more Elder Scrolls fun. Thank you!! I think we will have to replace that arm at some point. Do you have a good parts source?

You have saved the Xbox controller from the great ripped wire of 2022, I wish those who survived covid a happy new year

My rb is always the button that falls out and I was gonna diy it but I didn't want to do it without knowing how to put it back together MUCH NEEDED 🔥👌🏿✨

@XboxDIY

7 жыл бұрын

Yup - no problem. Not a lot of these out there but there are a few good videos on how to do it. Thanks for stopping by.

Thanks so much for a great video. The sync button was giving me issues until I saw you put it in the slot. Not into the center piece you are putting back on

FOR ANYONE HAVING TROUBLE the battery prongs are on your left, where the battery goes, when you mount the back, both prongs should be in the little dents opposite of the positive and negative engravings, and the should make contact wit the batteries

Great video man you helped alot!

My bumper buttons aren't individual like that, they're connected by a beam that attaches to the inside of the home button casing which makes it extremely hard to put them all back on.

You saved my ass bro. Great work.

Man went from Fossil to Apple Watch. Nice, really informative videos my man. Very helpful. My controller got wet and isn't turning on rn, might need to open it. What do you really need to do to solder, how careful u have to be? Please tell if you see this. Too lazy to research...

Thank u so much you just saved me 60 dollars

Thank you so much you save my discontinued controller

Thanks Bro, Your a A BOSS!

I freaking love you man thanks

Thanks a lot bro. I think my controller is slightly newer because my bumpers are different, but it still was really helpful.

@Adam-zh4hm

2 жыл бұрын

I had the same thing

Thank you, that helped!

So that's it. I broke the housing for the sync button. Glad I spent hours trying to figure that out.

Thx for your help

My bumpers are different than yours were, the whole assembly around the Xbox button was attached as well. Also I recommend borrowing a soldering iron or paying for a good one. I grabbed one that just plugs into the wall and it does not have the heat to soften the solder.

Thanks a lot that really saved me out

Dude god bless you, I was getting so angry that my right trigger wasn't pressing down when reassembling and for the life of me i could NOT figure it out. It's because I wasn't putting the battery prongs in place first with the back piece...

Why do I like ur voice so much

Good thing I just so happened to have a soldering iron lying around! The motors fell out and the cables got yanked out 🙄

Thank you so much dude, your a miracle maker lol

THANK YOU SO MUCH

Great video! Are all the home buttons the same across every xbox one controller?

you should do some fix's for the xbox elite controller like how the triggers get messed up and also the other problem the bumper breaks

@XboxDIY

7 жыл бұрын

On my backlog. I need to buy an Elite controller or find someone who is willing to give me one for the purpose of a review/disassemble/reassemble :)

@TheOmegaRiddler

5 жыл бұрын

That's a simple fix. You can get a replacement RB/LB button that goes under the cover for the home button. Getting the old one out may be tricky but it should be simple to fix. Just be careful if you choose to completely remove the back as there is a ribbon cable there.

One of the main reasons why I have not upgraded to an elite controller myself (besides the fact that they are very expensive) is the lack of Bluetooth. Now, this may seem like a stupid question but is it possible to take the Bluetooth from a regular Xbox controller somehow and add it to the Elite?

So, would I need to disassemble that far to take the broken bumper out? In other words, if I were to disassemble the xbox one controller just enough to take the broken bumper out, would I need to use the soldering assemble the controller back on?

HUUUUGE thumbs up and THANKS!!!

How do you ever get the soft he wanted as to have?

thank you so much

Thankyou so much

My controller Bumper on the right will click, but its like stuck. In game like COD it doesnt register, but on the home screen it goes all the way to the right. i have tooke. off the bumper! and it still clicks

Why did your sync button disappear? It was in the housing next to the xbox guide button, but then when you were getting the triggers back on, you had an edit, and it was gone. The end result was missing it as well. Its the thing I am looking on how to reattach lol.

After I open my Xbox one s controller and put it back together it never work again .can anyone tells me that to do ???

@kambo21

3 жыл бұрын

Did you you put it back together again right again double check if you didnt

my controller is a forza 6 limited edition xbox one controller. I think thats why my shoulder buttons arent snapping into place please correct if wrong and pls hlp

Thank you

AYEEE! You zoomed out and blink more now!

Ok I did it the way it says but now my controller wont turn on I took it apart cause my right stick wouldn't go right it was stuck it moves like it should but it wont turn on even with the charger plugged in

Both grey wires connected to rumble motors on each side disconnected, Will that affect game play?

Hey there. Was wondering if maybe you could provide some insight for me? I’ve had this problem twice now, but I’ve done some DIY Paint projects on two of my controller, and I have this problem where, after everything’s put back together, properly, for some reason, the controller registers that one or both of the triggers is being activated, despite the fact that it isn’t. I really can’t tell what exactly the problem is, but it seems as if the trigger isn’t coming back up 100% of the way, or for some reason the trigger naturally sits at a position where it’s activated. If I manually pull up on the trigger, it does deactivate. But as soon as I let go of it, it reactivates. I was wondering if maybe you had any knowledge on this type of situation, and / or if you know what a fix was. Thanks in advance!

I took my controller apart and everything works except for the D pad wants to be weird like if I press right it wants to go left and if I press the up button it goes down but there’s like a little white square piece that came out of controller and I don’t know where it goes back into

So I ran into an issue. I put my controller back together, even re-soldered the wiring. All the vibrations work, the B button and all the other buttons work except for the AXY buttons. I know it would have to be a problem with the first board, however before I took it apart the problem I had was with the rubber pad for the buttons due to the one under the A button breaking. Any ideas on what the issue could be?

When I try to put the side back pieces on the bottom of it doesn’t fit on all the way but near the triggers it goes in perfectly

is it needed to desolder and suck out old solder. can we use it as it is?

thank you

Great video! I was just wondering if I can somehow fix my RB button. It is working but it popped out of place and I don't know what to do to get it back in. It does function though if I push it down back into place but it's still really loose.

@XboxDIY

7 жыл бұрын

Hmm - that sounds like one of the clips is broken that holds it in to place (see this video for what I'm talking about). Have you tried taking it apart?

@kacper1120

7 жыл бұрын

Xbox DIY I just taped it on for now, it still works. If It gets worse I'll definitely take it apart. Thanks!

any tips on removing the trigger pin?

how can i remove the metal piece inside the battery's place that metal with + and - ?

And while attaching right bumper some small white thing came off from circuit board, but when i checked controller all buttons and vibrator motors are working is it necessary to attach that small white thing again. i don’t know where it came from but.

@shayanpavaskar4331

2 жыл бұрын

I found that white thing is on right side of you home button on top of circuit board named D20, what is its use do i have to attach it?

@shayanpavaskar4331

2 жыл бұрын

Check your video at 3:51 its visible

please make a bumper repair video for the XBOX ONE ELITE CONTROLLER

@XboxDIY

7 жыл бұрын

It's on my backlog. I need to get a hold of an Xbox One Elite Controller first :)

You're missing a part. It's a square box looking thing with what looks like for a headphone jack comes out the bottom of the controller

My trigger rumble motor is doing weird stuff when it vibrates it makes a loud sound please help me idk what to do

Hey +XBOXDIY I Love Your Videos But I Have A Question! My Controller Keeps Me Looking Up In GTA 5 (The Joystick Is Not In Its Position Its A Bit elevated) Plz Halp

@XboxDIY

7 жыл бұрын

I have this EXACT same problem with my other controller right now! It's definitely an issue you can fix. It could be one of a few things: - Rumble motor wires have moved around and are interfering with the joystick - Something sticky got in the joystick - Something sticky got in the circuit board - Bad circuit board You're going to have to open it up to see what's wrong with it, but you should be able to figure it out without taking just the shell off (check out my first video: kzread.info/dash/bejne/Y4WCurSJnbCseKw.html)

I need your assistance! I was wondering if I could send you my controller so you may fix it. The XYAB buttons aren't working anymore and the D-pad isn't either. I could pay you to do it and also send you the money to send it back to me. I would do this myself but I don't have the time or patience to do this nor the tools. Thank you for your time.

@lethatchyexplain6666

7 жыл бұрын

Nevermind my mom got me a new one lol. We're good to go!

@XboxDIY

7 жыл бұрын

Awesome, glad to hear :)

I only open up the front panel of my Xbox controller to clean the buttons when put it back together it won’t turn plugged a usb and tried new batteries if anyone knows how to fix it

THANKS

I just took my controller apart to fix the RB button and put it together with ease but for some reason it wouldn't turn on.. not sure what I did wrong not sure if I skipped a step.. any help is needed

@XboxDIY

6 жыл бұрын

Hey Jake - glad this helped you out. There's definitely a few things that could have happened. Check to make sure your circuitboards are snapped back together. It's a little bit wonky. Also, make sure the battery prongs that stick out are placed properly...I had an issue with that one of the first times I did a controller repair. Finally, double check the home button housing. Also another weird area that could prevent the controller from turning on if anything is wrong. Let me know if any of this stuff works!

@jakefindley1053

6 жыл бұрын

Xbox DIY I opened it up and checked everything thoroughly and looked closely and everything seemed to be ok so I put it all back together and it turned on right away. Thanks for the help I appreciate it

@XboxDIY

6 жыл бұрын

Yup, sometimes it's just a loose screw, or connection that's not quite there. Glad it worked for ya! Now it'll be 100x easier to fix next time lol

What do i do when the clips on the grips dont clip back in its very loose

How do you fix the right joy stike

Where can you get a souldering iron

What do you have to do if your left an right bumper are one piece?

When I put it back together the batteries don't work but the usb plug does,I've changed the batteries multiple times.Help?

I have a disc stuck in my console and I've tried everything that Xbox has said to do but I can't get it out what should I do?

@kendrickllama3231

7 жыл бұрын

Ethan Elliott have you been carrying your Xbox in a rucksack or something and a disk was in it? If so then your disk would have slipped and I wouldn't advise playing on it and open up your Xbox one which is a piss take

@kambo21

3 жыл бұрын

Maybe try taking apart your Xbox

I'm too stupid to put the back back on😭

I Need Some Help, I Broke My Right Bumper, This Started a Couple Days Ago When I Noticed That It Was Hard To Press My Right Bumper, The Right Bumper Was Very Hard To Press Toward The Right Side of The Bumper, I Was Messing With The Right Bumper, And The Whole Thing Just Came Out, I Can't Put It Back In, Maybe I Need a Tool, I Am Getting a New Controller Soon, So I Guess It Does Not Matter, Anyway Awesome Video! Happy New Year!

@XboxDIY

7 жыл бұрын

Thanks for stopping by and commenting! For your bumper, are the clips on the bottom of the bumper broken? Are there any other parts that are broken? If so, you'll need to replace it . And yes, you'll need to open the controller to replace no matter what, but the cool thing is you only need to pull the outer shell off to fix the bumpers (see my video on that here: kzread.info/dash/bejne/Y4WCurSJnbCseKw.html) Even if you don't have to fix it, it's cool to be able to know how to do it if something breaks in the future :)

@TheWaffleState

7 жыл бұрын

Ok! Thanks So Much! I'm Going To Replace It Right Now! Thanks So Much!

@XboxDIY

7 жыл бұрын

Awesome - let me know how it goes. If you have a torx screwdriver (you can get them at any hardware store) it will make your life a lot easier, but it's not necessary.

You put the d-pad on incorrectly when I did it this way my down directional button wouldn't work, I opened an old controller that wasn't opened before and the plastic direction pad goes under/before the metal ring.

Does the yellow tape matter ?

What about the rumble motor?

Would you be interested in refurbishing controllers in bulk quantities?

you have saved my controller and my ass from a whooping

I put it mostly back together before I realized you must not have mentioned the headphone jack :/ good video tho

my bumpers look way different than yours and every time i go to connect them the left one is crooked

Ive watched this video a hundred times and I still can't figure out what I'm doing wrong. Everything works fine until I put the back cover on, then the controller goes haywire. This is incredibly frustrating for two reasons. 1, I cant figure out if its the dpad or the right stick and 2, I cant figure out whats causing it. Can anyone help?

Don't forget to check out my other videos in this series: How to Open an Xbox One Controller (Part 1): kzread.info/dash/bejne/Y4WCurSJnbCseKw.html How to Open an Xbox One Controller (Part 2): kzread.info/dash/bejne/Y6uGyLWCebTfYrg.html I also have more detailed articles on XboxDIY.com!

how do you fix a wobble joy stick

could you do one for the elite mine has stick drift and it's out of warranty so I wanna learn how to do it myself. xbox support was no help they told me to restart my console. Yeah that will fix my controller

@XboxDIY

7 жыл бұрын

Moabdog00 Sure. I'll add it to my video backlog. Now that I learned how to solder it should be much quicker than how long it took to make this video.

@Moabdog00

7 жыл бұрын

Xbox DIY awesome thanks

@Moabdog00

7 жыл бұрын

Xbox DIY I just think it's stupid how it seems like the elite controllers are designed to break after 5 months this is my second one this year and I'm tired of waiting a month for xbox to fix it

I got the blue Xbox one gamestop exclusive and in won't go back together

I still dont understand why you unsolder the rumblers i have changed my controller shell without any soldering required its much easier!

@XboxDIY

6 жыл бұрын

You can change the shell without removing solders but to change circuitboards, buttons, etc. you have to remove the solders as they are wrapped around the board.

@thejasonlee35

6 жыл бұрын

Xbox DIY ive removed all buttons aswell without a solder was just curious but thats a great video either way by fat the best one ive seen for controllers !

@XboxDIY

6 жыл бұрын

And I'm not quite sure what I was thinking there - you can indeed change the buttons like you mentioned. This was more of a tear down than anything else, although I've definitely said "use this video to get here". Thanks for the feedback and stopping by!

How many screws are there all together🤷‍♂️

Where’s the next video ;(

the housing for the Dpad goes on *after* the Dpad, and it's pronounced Sodder. Great vid :]

@XboxDIY

7 жыл бұрын

Hey Ryan - thanks for stopping by. Appreciate the note on the d-pad. I've tried both ways and it's worked, but I think the way you're noting is better. Ya sodder...solder....not sure which way it goes as I've heard it pronounced differently all over the world :)

How do y’all know which connection to solder the wires to? There are 8 and he doesn’t say one thing about it

Solder - pronounced SAW DUR

@chawkfan94

6 жыл бұрын

THANK GOD IM NOT THE ONLY ONE. Also most SAWDUR these days is ROHS and does not contain lead - meaning its pretty much not at all harmful for you(other than the hot SAWDUR iron).

@dangerdac

5 жыл бұрын

Yes thank you! That was unbelievably annoying.

@hiddendemon5597

5 жыл бұрын

you are clearly from BAWSTON, its sole-der like bolder put with an S

Weekly videos please....

@XboxDIY

7 жыл бұрын

I need to deliver more videos. Doing my best, although they take awhile to make/edit which is tough with a full time job. Thanks for stopping by and check back for more videos soon!

Your camera angle sucks so much. Maybe you have a little zoomed in on the controller itself so people can see how to snap pieces back in.