The Seam Grip product is good. REALLY clean the area you are treating before application....just like she does here. Not a bad idea to do a second cleaning with a new cloth. First one gets most contaminants. Second one gets the last 10% of contaminants. The "brush nozzle" is kinda useless. Use the small brush like she does here. Really smoosh the product into the fabric as you are brushing back and forth. Let it dry a full day at least. Assume you have your tent set up and you are inside sealing seams. Or the rain fly is laid out flat. Really let it dry. Especially in a tent where air circulation may not be even. After you let it dry ....sprinkle baby powder on all the treated area. Then blow off the excess. This will prevent the seams from sticking to themselves when folded. WHICH THEY WILL. Plus it makes the tent smell nice. Any unused Seam Grip, store it in the freezer. If you need to come back to the job later or do a second coat....your brush will have dried material and now be useless. So...you can get these little brushes at the hardware store. They are called acid brushes or flux brushes (for applying soldering flux to pipes previous to sweating them).

@SnowysOutdoors

2 жыл бұрын

Thanks for the extra tips @blackdogbite ~ Lauren

@philipkitamura2870

Жыл бұрын

Thank you for the advice!

By far the best video explaining the three different kinds of repairs that should be done. Thank you very much!!

@SnowysOutdoors

2 жыл бұрын

No worries @RPD, stoked it was helpful! ~ Lauren

Well done video. Your information was clear yet concise. And, you didn't leave any unanswered questions. You have to love it when a company takes the time to do it right. Thank you. -John from Toronto | Canada

@SnowysOutdoors

2 жыл бұрын

I'm glad it was useful, John, thanks for the compliment. ~ Ben

Easily the best instruction I've seen on the Web for proofing tents, most just say squirt on and rub off exterior. Superb, thank you.

@SnowysOutdoors

Жыл бұрын

Thanks mate! ~ Lauren

Best video to show how it’s done. Thank you! If I were in Australia, I’d hop straight away to your shop. Greetings from Europe! ❤

@SnowysOutdoors

Жыл бұрын

Thanks @Karl Quint! ~ Lauren

Great video, my old Oztent RV 4 is just starting to have this seam seal issue. Thank you for the video. I will be ordering these products.

@SnowysOutdoors

2 жыл бұрын

The Gear Aid stuff is good, I've used it to repair all sorts of outdoor gear. ~ Ben

Great information on this confusing topic. Thanks very much.

@SnowysOutdoors

2 жыл бұрын

No worries! ~ Lauren

Thank you so much for this excellent video. Helped me understand why our 6 year old tent just leaked like a sieve on our recent trip and how I can fix it.

@SnowysOutdoors

Жыл бұрын

I'm glad it was useful, Melanie. ~ Ben

Great explanation. Probably wouldn't be using white spirit personally. It tends to have an oily residue which may effect the bond.

@SnowysOutdoors

2 жыл бұрын

Rubbing alcohol is probably your best bet, but we didn't have any for this vid so white spirits was out best option. Our understanding though is that given White Spirits is a dry cleaning fluid it does not leave a residue, there's a bit of info here - www.recochem.com.au/index.php/products/consumer_products/solvents/item/diggers_white_spirits. ~ Ben

Thanks! My 12 year old, 80 dollar aldi hiking tent has finally stopped keeping the rain out. I think it's also the companion 2 tent? I've since bought lighter tents for long hikes but it's been my favourite tent this whole time and I'm going to use it to try these fixes, plus the great tips in the comments.

@SnowysOutdoors

2 жыл бұрын

Fabrics will eventually deteriorate to the point that it cannot be fixed, John, if the coating is coming off the inside then it may not be worth the effort. ~ Ben

Great explanation on inside and outside waterproofing. Curious, what is to the cot/tent combo in the background.

@SnowysOutdoors

Жыл бұрын

Its the Oztent RS-1 swag and Stretcher @Brett S - both are the series II now, theres been an upgrade since we filmed this. www.snowys.com.au/rs1-swag www.snowys.com.au/rs-1s-king-single-stretcher-series-ii ~ Lauren

Great video. Any advice on a product to reproof groundsheet?

@SnowysOutdoors

Ай бұрын

I imagine the groundsheet waterproofing is similar to the internal coating on a tent fly, so it would be the same process. It depends on how much product is required, and the cost of that vs replacement ~ Lauren

Should always do this first and leave it out a couple of days before you go out hiking or camping etc learn to set it up a few times and down so it's easier etc

@SnowysOutdoors

2 жыл бұрын

Good advice, practice makes perfect. A properly pitched tent is going to help with weather protection too. ~ Ben

Great video! Washing machine? Will a machine wash remove the inside waterproof of your rain fly? Maybe try a bus tub and a bit of Woolite? Best wishes! Tent Guy

@SnowysOutdoors

2 жыл бұрын

Wouldn't recommend a top loader at all @Ten Minute Tent, but a gentle or hand wash cycle on the very odd occasion where you'd need to do repair work like this should be ok. Definitely not something to do on the regular, and hand washing or sponging is the best bet for general maintenance. ~ Lauren

This video is super helpful - thank you so much!!! I´m just wondering whether the 2nd technique (the fabric sealant on the underside) should be done as a maintenance thing or only when it is peeling. I have a mont moondance that has mostly coped really well with the rain but I´ve been getting leaks from the top of the tent near where the ventilation zipper is. I think this is partially because that panel is hard to fully tension out properly, or maybe because there are more seams vulnerable to water ingress since there is a zipper etc. There is no obvious damage and the tent is only about 2-3 years old but I´m wondering whether I should do all 3 steps just in case, or just DWR spray the top

@user-rd1vd1cb4i

Жыл бұрын

Also, can I use atsko sports wash to wash the fly?

@SnowysOutdoors

Жыл бұрын

With the 2nd technique - only when its peeling or degraded @user-rd1vd1cb4i. Excessive waterproofing coating can effect the performance of the materials generally, so best practice is to just revamp the original coatings. It sounds to me more like seam issues, or even just water ingress through the zip itself. The Moondance has been known to have abit of an issue with water around the vent in wind driven rain - it just gets pushed up and through the vents space. Its an awesome tent though, not knocking it at all. Best bet is if you're expecting rain, just check the forecast and wind direction, and set up the tent orienting the vent opening away from the wind. In term of washing, you should be able to but I would recommend doing it by hand, not in a machine. Hope that helps! ~ Lauren

Do you have tips on rewaterproofing the floor of a tent inner? Restoring the PU coating? Or would Nikwax solarproof spray be enough? If Nikwax, should we spray outside or inside of the floor?

@SnowysOutdoors

2 жыл бұрын

If the PU coating has deteriorated on a tent floor then you will never restore the full waterproof nature of the fabric. Sprays will have some impact, but given there is a lot of pressure on the floor fabric i.e. feet, mattresses, bags etc, it will keep leaking no matter what. If anything, I'd suggest a heavy duty silicone spray like this - www.snowys.com.au/silicone-water-guard-300g, but it still won't be a good as the original PU coating. ~ Ben

Should we not be distinguishing between the two main types of fabric waterproofing methods -- polyurethane (PU) and silicone -- and hence the two main types of repair sealant we must use? I *think* silicone coating must be treated with silicone sealant but PU coating may be treated with silicone or urethane sealants?

@SnowysOutdoors

2 жыл бұрын

Thanks for raising this @Martin Feuchtwanger! My understanding is that silnylon or silpoly tent flys have the silicone waterproofing integrated into the actual fabric, and so there is nothing to peel off or replace. The waterproofing maintenance options for these tents are the seam sealing and the external spray. Silnylon/sil poly tents are able to be seam taped, so the seal sealing method used in the video (using silicone seam sealer) is more than acceptable. The spray treatments for water repellancy on the outer side of the fly are also silicone based so are suitable for use. If you have a tent fly that is crumbling or pealing off an internal coating, that will be a PU treated tent, so the standard tent sealers will be a-ok. I'm happy for others with more knowledge on this to chime in here though! Always happy to get other opinions and advice. ~ Lauren

Just wondering if the same techniques will work for the material on a gazebo as the fabric seems to be a little different to a normal tent fly ?

@SnowysOutdoors

2 жыл бұрын

Should be the same, most of these fabrics are a synthetic or synthetic blend with a PU coating, which is what the gazebo's we sell have. ~ Ben

Will the stuff you are using to seal the tent also work against sun damage for both tarps and tents? In Canada, and North America we often get more damage from the sun wearing down the tarps and tents more than we get water damage. It would be nice to know which things you can use to get the tents to last longer. Thanks.

@SnowysOutdoors

10 ай бұрын

It won't help with UV light, but there are products that are designed as such. Nikwax make this Tent & Gear SolarProof product that may meet your needs - www.snowys.com.au/tent-gear-solar-proof. ~ Ben

Hi, I want to know if is it a must to remove the deteriorated coating first before applying the tent fabric sealant ? I have a naturehike tent and it started leaking from the bottom of the tent everytime a heavy rain hits. But there's no deteriorated/broken coating to be seen on the bottom of the tent, should I try to remove/clean it with alcohol first or can I just straight applying a new tent fabric sealant?

@SnowysOutdoors

3 ай бұрын

Doesnt sound like recoating it will make much difference - the water ingress might be coming from seams, etc instead? The waterproof coating will bond to fabric, but wont be super effective layering over existing coating ~ Lauren

@ersent8624

3 ай бұрын

@@SnowysOutdoors Thx, nice insight, I'll try something on it.

Hello there i wanna to paint my coleman with black..could u please advice me on that

@SnowysOutdoors

8 күн бұрын

Dont know any product that will repair the black coating, sorry Try using Black repair tape like gear aid or k-tape ~ Lauren

have a nice day north face storm brek tent The floor gets water. Which one do you think I should use?

@SnowysOutdoors

6 ай бұрын

It depends on how bad the floor is leaking/how deteriorated the fabric is. Nikwax have this product - www.snowys.com.au/tent-gear-solar-proof, which will help with water repellency but if the PU coating on the fabric has deteriorated then it may be hard to bring it back to the original waterproof levels. ~ Ben

@huseyinteke1365

6 ай бұрын

@@SnowysOutdoors thanks a lot I am going to try Nikwax, there is deterioration in a total of 30.40 cm of the floor.

Awesome

@SnowysOutdoors

2 жыл бұрын

Glad you liked it. ~ Ben

Will these work on an otzent rs1 swag?

@SnowysOutdoors

Ай бұрын

RS1 swag is canvas, so the material treatment would be different. The seam sealing & DWR would be ok ~ Lauren

How is it applied, inside or outside the seams of my tent?

@SnowysOutdoors

2 жыл бұрын

If you are applying glue to the seams, you can apply it on the inside over the actual stitching. ~ Ben

4인용텐트 바닥방수 (2×2m) 에 제품 몇개가 필요할까요

@SnowysOutdoors

Жыл бұрын

예를 들어 www.snowys.com.au/silicone-water-guard-300g와 같이 3-4캔이 필요할 것 같습니다. oyur 텐트 바닥이 새는 경우 방수를 공장에서 적용한 PU 코팅과 동일한 수준으로 복원하지 못하므로 접지 시트와 트레트먼트를 함께 사용하는 것이 좋습니다. ~ 벤

Stupid me decided to wash my bivy in the washing machine. The coating on the floor flaked off all over. The coating on the roof did not. Hoping I could do something like this to recoat it.

@SnowysOutdoors

9 ай бұрын

The Gear Aid Tent Fabric Sealer might be the way to go? It give a polyurethane coating ~ Lauren

Cómo consigo los productos para Colombia

@SnowysOutdoors

Ай бұрын

Solo enviamos a clientes australianos. Es posible que tengas que usar Google para buscar personas que vendan productos cerca de ti. ~ Lauren

Thanks great tips. What would you use for re-waterproofing a jacket? Maybe in another video?

@SnowysOutdoors

2 жыл бұрын

You can use the same process for a jacket and you'll see some improvements. But, if it is a breathable laminated fabric such as Goretex, Pertex, eVent etc then you won't be able to restore it to the original breathable performance levels as there is a bit more going on with these fabrics. You'd be best maintaining the DWR treatment on jackets, but if laminated fabrics start leaking then it might be time for a new jacket. ~ Ben

@sdqsdq6274

2 жыл бұрын

@@SnowysOutdoors hmmm i never believe any waterproof product to be breathable , if water cant get in , air too

@racheat

Жыл бұрын

@@sdqsdq6274 air molecules are smaller than water molecules. It isn't impossible as I sweat A LOT but have noticed this effect with some materials.

Wish I knew this was possible before I tossed mine out at the tip after a wet disaster of an Easter camp 😂

@SnowysOutdoors

2 жыл бұрын

It won't restore it back to factory standards, it's more of a maintenance thing, it really depends on what condition your old tent was in as to whether these measures would have made a difference. ~ Ben

Why does this seam sealer stick to itself. SEAM GRIP+WP is sticky to itself after it dries?

@SnowysOutdoors

Жыл бұрын

I guess it's just the nature of the glue, Piotr, I can't explain why it remains sticky sorry. ~ Ben

@racheat

Жыл бұрын

A tip I saw in another video is to sprinkle talcum powder on it....

@koza2o

Жыл бұрын

@@racheat thanks!

Hi there .. why my tent water still come in after im spray atsko silicone spray and dried 12 hour ? 😢

@SnowysOutdoors

Жыл бұрын

There will be some point at which the fabric is too old or deteriorated for any sprays or applications to work, Ahmad, I'd need to see the fabric in order to make a judgement here. ~ Ben

@ahmadfirdaus3404

Жыл бұрын

@@SnowysOutdoorsi just bought tent last month .. thanks ben

@SnowysOutdoors

Жыл бұрын

@@ahmadfirdaus3404 are you sure it is leaking and not just condensation? ~ Ben

@ahmadfirdaus3404

Жыл бұрын

@@SnowysOutdoors i let you know once i try 1 morr time .. im from melbourne .. thanks ben ..

I've used 2 cans of the same silicon spray on a nylon jacket , did nothing.

@SnowysOutdoors

2 жыл бұрын

2 cans! It must have had some effect, Eddy, the water should bead off better than prior to treatment. ~ Ben

Nice video, but I think it should be more precise as to what sort of fly, what sort of tent floor etc. It is not indifferent as to what material and what treatment is done. Please expand on that. So, for example some tents are siliconized on the outside of the fly and ditto on the inside. Some are siliconized on the outside, but PU treated on the inside. Similar to tent floors. What to do with different floors? Also, I think you should explain why or why not to remove old taping and reapply new similar tape. Kind regards.

@SnowysOutdoors

2 жыл бұрын

Thanks Jacques, we'll take your feedback onboard. ~ Ben

👍👍👍👍👍

@SnowysOutdoors

8 ай бұрын

Glad you found this useful. ~ Ben

Shake well before applying.

@SnowysOutdoors

8 ай бұрын

Hot tip! ~ Lauren

The tube of seam grip is now done after that use. Unless you have anything else that needs repair at the same time. The stuff sets solid in the tube even when your careful to put the cap back on immediately. The Nikwax is the worst DWR in the world. Shame you didn't talk about the spray can you had, as that stuff is the best for tents and Gore Tex jackets. It gives a factory like or better DWR.

@SnowysOutdoors

2 жыл бұрын

Store the Seam Grip in the fridge, or even better the freezer, The English Trucker, it lasts loads longer. As for the silicone spray in the vid, we don't recommend this for laminated breathable fabrics like GoreTex as it negatively impacts the breathability of the fabric. The re-application of a DWR is never as good as the factory applied treatment simply because the dirt and grime in the fabric, even after washing, as well as the surface being a little more worn,. Regular treatments is best to maintain DWR effectiveness. ~ Ben

Hose ya tent, awning, whatever off. 250ml of non acid cure silicone and 1 litre of white spirit mixed thoroughly will seal everything. Paint it on with a cheap shit brush, done. Won't need to trim off bits .....pin holes or puncture marks (a hole). Enough for a whole tent.

@SnowysOutdoors

2 ай бұрын

Sounds like an industrial strength solution, can;t say I've tried it. ~ Ben