How to put on First Order Storm Trooper Armour (Imperial Surplus)

Ойын-сауық

Kit Made by: imperialsurplus.com/
Holster/Glove armour: Dan Sczudlik (contact via FaceBook)

Пікірлер: 121

  • @SandraOrtmann1976
    @SandraOrtmann19762 жыл бұрын

    I had to smile about that "you look cool or you are comfortable". Like you, I prefer to look cool. Though I took the Mandalorian route. My first life-sized costume is the Boba Fett post-sarlacc. It is well under way, and I wore it already once (with a hastily painted and already stripped helmet) to one event. Without ventilation. Boy, did it feel hot, and did it feel cool! So - did I go for a Jedi with my next costume? No...Mando again. This time basically a full plate harness, mostly made of aluminium and black leather. Some red thrown in here and there (helmet is 3d printed though). I hope to get both approved by the Mando Mercs (the metal stuff is doubtful, it may be too much in the realm of a medieval suit of armour. But we shall see. I am doing my best to squeeze the Mando in there.).

  • @CaptainsDrydock

    @CaptainsDrydock

    2 жыл бұрын

    Fingers crossed in getting your Mano armour cleared. What's important is that it makes you feel great wearing it and love the reactions from others. Sounds like you've put a lot of effort into it, so I bet it looks amazing!

  • @FUCKINGRI0T
    @FUCKINGRI0T2 жыл бұрын

    I'd love to work at a Disney park and wear this

  • @CaptainsDrydock

    @CaptainsDrydock

    2 жыл бұрын

    That would be such an awesome job to have on your CV (Resume). Under work experience.... Shop assistant, paper boy, Stormtrooper :D

  • @givemetreats

    @givemetreats

    Жыл бұрын

    U wouldn’t you have to share underwear second u will…. ITS JUST HORRIBLE WHEN I USED TO WORK THERE TRUST ME I QUITSTRAIGHT AWAY

  • @alexjohnson3306

    @alexjohnson3306

    5 күн бұрын

    @@givemetreats lol I wouldn't care - I just wish I was tall enough... theres a height and I wont work im 5'7 but....sure they cleaned the undersuits ? lol i'd love to hear behind the scenes of a trooper a disney its kinda rare! still WAITING for my neuvo suit i guess another quality control issue ....same at disney for 6k is 1200 on the site

  • @gustonzimasheen
    @gustonzimasheen Жыл бұрын

    32:11: The whole process, although uncomfortable for you at times, is so satisfying at the end. My excitement level went up when you pulled out your weapon...uh that doesn't sound right.

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    LOL :D Best comment ever!

  • @futrfromundertherock4917
    @futrfromundertherock49172 жыл бұрын

    So glad they addressed going to the bathroom in that thing

  • @CaptainsDrydock

    @CaptainsDrydock

    2 жыл бұрын

    It's strangely a subject not mentioned much despite those that wear the armour do so allllllllll day. Might do a KZread video dedicated to it but then might be banned soon after :D

  • @user-kf1mq3fd9f
    @user-kf1mq3fd9f6 ай бұрын

    Thanks, now I know where i Should start when getting dressed

  • @attilafekete7892
    @attilafekete78922 жыл бұрын

    The joke is that Finns undersuit when he took of the armor in eo 7 was anything but an actual undersuit. It was too loose and 2 piece and no shiny butt. Even worse werr his shoes, where did he got those grey shoes in the middle of the desert??

  • @CaptainsDrydock

    @CaptainsDrydock

    2 жыл бұрын

    WoW! Did not notice that. Not that you've pointed it out, I won't be able to unsee it :D

  • @gustonzimasheen

    @gustonzimasheen

    Жыл бұрын

    I haven't looked into this myself, but I always imagined that's how Han Solo knew that Finn was an ex Stormtrooper, from what he was wearing. Mainly the shoes, since he'd had to wear the uniform too at some point or another.

  • @kibainuzuka858

    @kibainuzuka858

    Жыл бұрын

    His shoes were white at the start of the film but when he crashed landed and walked threw the dirty burnt sand his shoes got even more dirty and he walked all the way to town in jakku so they got even more grimy. If you look closely it is the same shoe as every other trooper. Just way more dirty

  • @attilafekete7892

    @attilafekete7892

    Жыл бұрын

    @@kibainuzuka858 nope, it is way different than regular stormtrooper boots, it has a ribbed texture on the top. Google FN 2187 boots.

  • @alexjohnson3306
    @alexjohnson33065 күн бұрын

    i commend ya mate i ordered the pre made ...just don't have the space to do it but my bday is a few days before hallloween and hopefully going to get my first order suit before! i have the fitted anovovs helmet and same boots (lol not new hope) but everything ready to go even gloves so watching again so when it happens I know...thanks man!

  • @TODOMONKE
    @TODOMONKE4 ай бұрын

    wow super cool armor! i got the child one when i was younger for only 200, now its 300!grew out of it ages ago, will buy the adult version soon cant wait!

  • @CaptainsDrydock

    @CaptainsDrydock

    4 ай бұрын

    You'll love it!

  • @TODOMONKE

    @TODOMONKE

    4 ай бұрын

    You also earned a new sub 👍🏽

  • @CaptainsDrydock

    @CaptainsDrydock

    4 ай бұрын

    @@TODOMONKE Very much appreciated :) For the Empire!

  • @deaghansionnach2936
    @deaghansionnach2936 Жыл бұрын

    Brilliant video, I have been searching for a while now to purchase armour, came across you by accident, awesome video! Many thanks, I will order my armour from Denuo Novo, where can I purchase the boots and gloves and blaster from? Many thanks!

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Thank you so much for your support :) I made a video on the soft material i.e. boots & gloves including links in the video description... kzread.info/dash/bejne/k6B20cWBp9XelLA.html If you would like a premium light & sound effects blaster such as the one on my channel (link below). Feel free to contact me directly at jchild@ive.co.uk kzread.info/dash/bejne/gH-Am66Gira_cpM.html

  • @josephbevacqua9217
    @josephbevacqua9217 Жыл бұрын

    Nice video

  • @Ragnarok6664
    @Ragnarok6664 Жыл бұрын

    Really like the baton addition, best char in FA ☝🏻😅

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Thanks so much. I got it more for the fact I was able to walk around in public and not have the Police jump on me if I had a blaster :D

  • @bradbryan1283
    @bradbryan1283 Жыл бұрын

    Good! How long did it take you to build it?

  • @Jormungandrr69
    @Jormungandrr69 Жыл бұрын

    Super cool and thanks for making a tutorial on how to put on the armor lol! Do you happen to know where I could get my hands on a mando? Im only around 5'3, so im a little short and dont know .

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Thank you :) No matter your height you can tailor armour to your proportions. Regarding Mando, sorry I don't know where to get the full armour. However, check out the Facebook groups as they will tell you the best places to go - lots of made producers out there.

  • @jonathanchaps5665
    @jonathanchaps5665 Жыл бұрын

    I just got my Denuo Novo complete kit(ordered in 2016... arg!). I'm slowly building and watching these vids as a guide. Love it! Question is: do you HAVE to paint all of the armour? I can see here and there to cover bondo/slurry/epoxy. But painting the whole thing feels.... unneeded. And another variable to worry about with wear and tear. Why did you decide to do it? (Side note: it seems like my helmet white is a shade off of the armour. And I know that's a big factor too).

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Thank you for your support :) To get a uniform finish, you'll need to paint everything. You'll see the difference in shade and texture immediately if you decide to only paint where filler is applied. Regarding wear & tear, this will happen when used and you'll have to make repairs which is the added benefit to paint everything, as it'll be easy to hide the cracks you repaired later. Difference in shade can stand out depending how different it is. Note, compare the helmet & armour outside under day light conditions rather interior lighting. Some troopers respray the helmet in the same paint they did the armour. Or do what I did, and find a white that looks exact to the helmet and just paint the armour. Hope this advice helps :)

  • @jonathanchaps5665

    @jonathanchaps5665

    Жыл бұрын

    @@CaptainsDrydock this does help. There was a recent video of a 501st member discussing his armour. Not a tutorial, more of a review. I've sure you've seen it (if not I'll send you the link). He said he didn't paint the armour. But you raise good points. A uniform white is ideal and prob what the 501st wants. It's great to see you responding to questions. Thanks Captain!

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    @@jonathanchaps5665 I'm happy to help, as the reason I started this channel was due to not finding 'friendly' support. So I'm glad you're finding it useful :) Let me know if you need any further help. Cheers Commander ;)

  • @AIDEN_SMIT
    @AIDEN_SMIT2 жыл бұрын

    Yeah haha I just ordered a new pair of forearms 😂 if only these videos existed a year ago 😂😂😂

  • @curtabbott6032
    @curtabbott6032 Жыл бұрын

    Did you ever get your Anovos one? I actually received mine today. I ordered in 2016, and the new company Denuo Novo honered the order.

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    I cancelled my order a few years ago and received a full store credit from Denuo Novo. Seen lots of posts of customers receiving theirs recently. Tempting to order one, but seeing I have a completed Imperial Surplus set there's no point.

  • @TK2236
    @TK2236 Жыл бұрын

    Thank you very much Sir o7 (edit) if I may ask, how tall are you?

  • @peppermintrampage5884
    @peppermintrampage58842 жыл бұрын

    5' 7" "Aren't you a little short for a stormtrooper?"

  • @CaptainsDrydock

    @CaptainsDrydock

    2 жыл бұрын

    🤣

  • @bradbryan1283
    @bradbryan1283 Жыл бұрын

    Love this video Captain's Drydock! Can I ask how much you love the armor sir?

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Thank you for the support - much appreciated :) I love this armour and feels great when walking around in it.

  • @bradbryan1283

    @bradbryan1283

    Жыл бұрын

    ​@@CaptainsDrydock Where did you get that blaster that is so darn cool?

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    @@bradbryan1283 Here's a link to my video making it. The links to the 3D files are in the description. I'm currently filming a detailed playlist of making it so others can follow. kzread.info/dash/bejne/doOez7eAmrCdhps.html

  • @bradbryan1283

    @bradbryan1283

    Жыл бұрын

    Thank you I got a blaster because of that video!

  • @daoistchristianity
    @daoistchristianity Жыл бұрын

    Very nice, can I make my own stormtrooper armor out of foam?

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Thank you. Sorry, I don't work in foam. But there's many makers that specialise in that material.

  • @CDNStarWarsOutpost
    @CDNStarWarsOutpost Жыл бұрын

    I'm looking at purchasing one of these suits. I saw that anovos makes a suit as well but its a bit more expense. What made you go with the imperial surplus one?

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Like many, I ordered from Anovos, but they didn't fulfil their armour order for years if at all. So I cancelled it. After much investigation at the time the next best armour kit was produced by Imperial Surplus. As the owner was the original designer of the first Anovos version of the kit before he made his own business. Stands to reason why it's very accurate - enough to pass 501st standards. Anovos has since been bought by Denuo Novo and now (in my opinion) produce the best kits on the market using a vac-form technique to make well defined details and edges. So if you have the money - buy Denuo Novo but if you have a tight budget, Imperial Surplus is still good enough to make you look and feel you walked off the set. Hope this feedback helps as I did waffle on a bit :D

  • @CDNStarWarsOutpost

    @CDNStarWarsOutpost

    Жыл бұрын

    @@CaptainsDrydock Thanks!

  • @singriioticstudios
    @singriioticstudios2 ай бұрын

    How did you add sound effect and your wife's voice to the e11 blaster??

  • @CaptainsDrydock

    @CaptainsDrydock

    2 ай бұрын

    Here's a video

  • @bradbryan1283
    @bradbryan1283 Жыл бұрын

    @Captain's Drydock Can I ask that I have First Order Stormtrooper Armor but I do not have the Force Awakens Helmet. Any idea where I can get one sir?

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Here's a link for the helmet... www.denuonovo.com/products/star-wars-the-force-awakens-first-order-stormtrooper-premier-helmet

  • @bradbryan1283

    @bradbryan1283

    Жыл бұрын

    Thank you sooo much sir I am purchasing the helmet now!

  • @ricardogimeneztoyota3622
    @ricardogimeneztoyota36222 жыл бұрын

    What’s the pricing for these cosplay? Sorry I can’t find it on the website 🥺

  • @CaptainsDrydock

    @CaptainsDrydock

    2 жыл бұрын

    Check out the first episode where I break down the cost... kzread.info/dash/bejne/oG2Bp8uHk7Wep9I.html

  • @ricardoquiro
    @ricardoquiro Жыл бұрын

    I didn’t get that well. The harness you wear under the armor, did you make it?

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Thank you for your support:) The harness that holds up the abdomen was made by me. Here's a link to the video... kzread.info/dash/bejne/a6eVqteBdbDTn9Y.html

  • @ricardoquiro

    @ricardoquiro

    Жыл бұрын

    @@CaptainsDrydock ahhh, Awesome! I really enjoyed your videos and tutorials! I’m finishing a Sith Trooper to join the 501st and assembling the armor has been challenging for a first-timer 😅

  • @ricardoquiro

    @ricardoquiro

    Жыл бұрын

    @@CaptainsDrydock actually I was looking for information on the harness of min 35:28.

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    @@ricardoquiro Ah, that is produced by a Candian maker called Geeky Pink. She can be found on FaceBook.

  • @cutulphashby6972
    @cutulphashby6972 Жыл бұрын

    Sorry to get in touch this way but I don’t know how to email directly! Hello, I’m very very keen to sort my anovos kit out for a first order stormtrooper! I’m having difficulty finding all your tutorials in order and also I want to know exactly what tools you recommend I get before even starting! I have to trim the kit from scratch- let’s not even discuss the blaster yet! … I was amazed to even get it tbh but don’t want to mess it up as it’s my first attempt! If it’s tricky can you recommend anyone to do it for me? I’m in Norfolk… Thank you and LOVE the channel! Liam

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Super thank-you for your support. Completely understand wanting to be careful as it costs a lot for us to import into the UK. I've added the full playlist link below and should start sequentially and answer your questions. But if you want more details, feel free to email me jchild@live.co.uk and I can give you detailed answers. kzread.info/head/PLRnCvSLA9KE4AEzeIN4-BgZ7dZTLZi5am

  • @jotunhammer
    @jotunhammer2 жыл бұрын

    and right side velcro shows putt that side inn and 1 more thing get helmet little bit more back looks to heavy front faced

  • @bradbryan1283
    @bradbryan1283 Жыл бұрын

    Captain's Drydock Where can I find an awesome baton like yours?

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Here's my video review of the baton. Sadly they no longer make it, but if you're lucky you can find them on Ebay. This is where I got mine... kzread.info/dash/bejne/fZqcssqJj9Cufso.html

  • @bradbryan1283

    @bradbryan1283

    Жыл бұрын

    Oh I still love your videos ❤.

  • @billybonesthepirate2025
    @billybonesthepirate2025 Жыл бұрын

    could you start to create a Storm Trooper church that would be cool.

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    :D I think I need a bigger 3D printer. But love the idea.

  • @bradbryan1283
    @bradbryan1283 Жыл бұрын

    @Captain's Drydock I bought a set of first order stormtrooper armor but it's too big. What to do?

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Hi Brad,. Simple answer is 'trim to fit'. Where doesn't it fit and what height are you?

  • @bradbryan1283

    @bradbryan1283

    11 ай бұрын

    I am 5ft7

  • @bradbryan1283

    @bradbryan1283

    11 ай бұрын

    The spats are too big

  • @CaptainsDrydock

    @CaptainsDrydock

    11 ай бұрын

    @@bradbryan1283 You can trim them?

  • @bradbryan1283

    @bradbryan1283

    11 ай бұрын

    @Captain'sDrydock I managed to trim my armor and it is ready to wear! Can I send you a picture

  • @PowerSL
    @PowerSL Жыл бұрын

    Where'd he get the harness?

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Hi Geeky Pinks via Facebook :)

  • @leoplays9303
    @leoplays9303 Жыл бұрын

    The thumbnail💀

  • @bradbryan1283
    @bradbryan1283 Жыл бұрын

    Did you like the video?

  • @OMARALLSTARBABY
    @OMARALLSTARBABY Жыл бұрын

    Can I buy the entire suit from you please

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    If I did sell this, it would be for a lot of money.

  • @NicoDLB
    @NicoDLB5 ай бұрын

    Ou pouvons-nous acheter cette tenue s'il vous plaît ???❤

  • @CaptainsDrydock

    @CaptainsDrydock

    5 ай бұрын

    imperialsurplus.com/product/first-order-stormtrooper/

  • @NicoDLB

    @NicoDLB

    5 ай бұрын

    Je vous remercie ❤ mais je suis Français, j'espère qu'ils pourront me comprendre et moi aussi car je parle pas anglais malheureusement 😢😢

  • @CaptainsDrydock

    @CaptainsDrydock

    5 ай бұрын

    @@NicoDLB Google Traduction :)

  • @jotunhammer
    @jotunhammer2 жыл бұрын

    my body dont fit anovos kit or imp sur 👀

  • @CaptainsDrydock

    @CaptainsDrydock

    2 жыл бұрын

    Sorry to hear. 3D printed armour is a great option as it can be scaled to any size or shape.

  • @bellbell1135
    @bellbell1135 Жыл бұрын

    WAHERE DID TOU GET THAT I MUST KNOW

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    imperialsurplus.com/product/first-order-stormtrooper/

  • @alexjohnson3306
    @alexjohnson330611 ай бұрын

    ha under armor socks under your armor mate!

  • @CaptainsDrydock

    @CaptainsDrydock

    11 ай бұрын

    LOL... I didn't notice that :D Good spot

  • @alexjohnson3306

    @alexjohnson3306

    11 ай бұрын

    just pre ordered the denuo novo set and im 5'7 also so this helps alot !

  • @rododin
    @rododin9 ай бұрын

    Can you make me storm trooper armor?

  • @CaptainsDrydock

    @CaptainsDrydock

    9 ай бұрын

    Yes, but it will be expensive. Message me at jchild@live.co.uk

  • @KKPLAYZ1888
    @KKPLAYZ1888 Жыл бұрын

    Lil fala I don’t know about lil. Lol

  • @Neseku
    @Neseku Жыл бұрын

    First Order officer uniform??

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Hi, is that a request?

  • @Neseku

    @Neseku

    Жыл бұрын

    @@CaptainsDrydock Yes please 🙏

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Sadly it's not my bag. I'm more into being a grunt trooper :D But if I do find someone that does, I'll forward you the link.

  • @jameswentzkershawn001
    @jameswentzkershawn001 Жыл бұрын

    No!!! There is no way!!!

  • @70CadillacMan
    @70CadillacMan10 ай бұрын

    What if you have to poop 💩?

  • @CaptainsDrydock

    @CaptainsDrydock

    10 ай бұрын

    Hold it unless the Force is too strong :D

  • @brysonblood2697
    @brysonblood26972 жыл бұрын

    The 501first is clone trupers that were lead under Anakin Skywalker or known as Darth Vader

  • @orsom1234

    @orsom1234

    2 жыл бұрын

    It's also a group of people that wear screen accurate star wars armor

  • @rododin
    @rododin9 ай бұрын

    What if you have to go poop💩 in your bed

  • @CaptainsDrydock

    @CaptainsDrydock

    9 ай бұрын

    Let it happen :D

  • @bradbryan1283
    @bradbryan1283 Жыл бұрын

    Can I subscribe to you Captain's Drydock?

  • @gabrielm.942
    @gabrielm.942 Жыл бұрын

    While I hate the Disney movies. Their imperial designs were pretty good. Outside of the officers that is. The ships looked great, the armor looked cool, ships looked better then their og versions. However the movies were just terrible lol

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Same here, I love the designs more than the movies. Although my guilty pleasure is Force Awakens.

  • @gabrielm.942

    @gabrielm.942

    Жыл бұрын

    @@CaptainsDrydock same 😂. It’s the only good one. Especially if you’ve watched the behind the scenes of the originals released in the 2000s. The idea of force awakens is basically George’s original crew. They simply ruined it follow up movies and bad writing.

  • @flexflex7605
    @flexflex76052 жыл бұрын

    La légende de Pamelarioss.Uno snowquen's est mon idole. C'est la personne que j'aspire à êtres, c'est ma lumière du jour

  • @jameswentzkershawn001
    @jameswentzkershawn001 Жыл бұрын

    As much as:::: in my whole life, I wanted to be I Storm Trooper;;;;;;Goodbye.

  • @RexTheNarrator
    @RexTheNarrator Жыл бұрын

    I hate the new trilogy...I love the designs

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Yeah the designs are so well done.

  • @stevecarp7435
    @stevecarp7435 Жыл бұрын

    Utter nonsense

  • @CaptainsDrydock

    @CaptainsDrydock

    Жыл бұрын

    Thank you for your support x

Келесі