HOW TO PROTECT THE FRONT SPLITTER/AIR DAM ON YOUR DODGE CHALLENGER!
Автокөліктер мен көлік құралдары
Here's how to protect the front splitter/air dam on your Dodge Challenger. It will keep the splitter looking like new especially when you scrape it against concrete on steep driveways or parking lots. This is a good replacement to the yellow/pink splitter shipping guards (bananas) that come from the factory.
.
.
I found this product on ZL1 Addons - Challenger 18-21 Widebody Splitter guards: zl1addons.com/collections/dod...
.
.
I hope you enjoyed todays video! If you did, drop a comment below and let me know your thoughts. I would really appreciate a like on this video, sharing it with your friends, and hitting that subscribe button and the notification bell so that you can stay up to date with all of my videos! Also if you are looking for more ways to connect with me, find me on Instagram and Tik Tok @SchwayZ_ and shoot me a message or interact with my stories/videos.
.
.
⚠️ We are now on the road to 10k subscribers!!! 💪 Be sure you don't miss out by liking this video, posting a comment, subscribing, and hitting the notification bell so that you know when it happens!⚠️
Пікірлер: 65
Great video man ! It’s helpful ! 🔥
@SchwayZ
3 жыл бұрын
Thank you man! I am hoping this saves someone from a banged up splitter
Great video! Very informative
@SchwayZ
3 жыл бұрын
Appreciate it man!🙏🙏🙏
the intro never fails to amaze me, great work SchwayZ.
@SchwayZ
3 жыл бұрын
Really appreciate that man! Thank you for watching!🙏🙏🙏
Clean install. Really hope it works out for you! I never knew they had that.
@SchwayZ
3 жыл бұрын
Thanks man! Me neither until I stumbled upon it
Awesome video man. Glad you got some protection under neath :)
@SchwayZ
3 жыл бұрын
Appreciate it man! Me too!
That’s DOPE BRO!!! Think I may get that myself
@SchwayZ
3 жыл бұрын
Thanks man! Yeah they have some stuff for the narrow and widebody versions to check out!
Good video! I have a 2019 scat pack. But to remove a ton of plastic in order to screw more plastic onto the vehicle to protect another plastic part from scratches? Who needs it? 😉 Well done, keep it up!
They look good. I bought the ZL1 Add-on Challenger Widebody Rock Guards. They work great, look nice and are an easy install also. You should definitely look into those. They definitely stop those 305s from slinging debris down the side of mine.
@SchwayZ
3 жыл бұрын
Ive seen those as well! Havent pulled the trigger on those yet but I may get those in the future
Good video and install. Have a 2021 Challenger SP/WB, no scrapes so far but am aware, very careful whenever the angle of some driveways, etc. looks like it might or could scrape. Looking forward to further review as time goes on. Thanks again! And...awesome Hell-Kitty!
@SchwayZ
3 жыл бұрын
Appreciate you watching man! And awesome ride! Love the widebody ScatPacks
I know you mentioned it but wanted to confirm, I have a '21 challenger scat pack NON wide body. I wanted to know if this would fit mine as well.
Nice product. I'm interested. I'm careful with my new RT but we all know that horrible feeling when you hear that sound of scraping.
@SchwayZ
3 жыл бұрын
You and me both man! It just ruins the day!
Its been a bit, how are the splitter protectors holding up?
Where did you get the awesome side decals
how much lower is the front end of a hellcat challenger with that splitter vs a charger?
upload a video for challenger parallel parking.. Because the usual/standard view points for the parallel parking dosent in a Challenger
I was gonna say it might be time to invest in some race ramps and then you go and link my vid and throw my channel up on the screen. I really appreciate that and it means a lot to me so thank you for that. Don't forget the creeper, makes sliding around on your back a lot easier too! Great compromise though for protecting your splitter after all the banana hate. Looks good and great quality. It'll definitely be interesting to see how they fare after some time and scrapes, although I'm sure you'll still be trying to avoid it if you can.
@SchwayZ
3 жыл бұрын
Of course man! That's what we are all here for. To support each other! And I was thinking about your ramps the whole time I was doing the install lol Yeah creepers are definitely nice. There wasn't much clearance for one without the ramps so I didnt use one. I barely had room on the ground haha. I'm definitely going to still take it nice and easy on parking lots and driveways but I think I'll feel better when it scrapes. Thanks for watching man!
I looked for this on zl1 Addons website didn’t see it on there I need this lol
@SchwayZ
3 жыл бұрын
The link is in the description
A few videos ago, you took you hellcat in for a rattle in the seatbelt housing. What is they say was the issue, im having the same
@SchwayZ
3 жыл бұрын
I talk about it in that video. It's the body panel clips making the noise. They added foam and it sounds better now
@venom392uned
3 жыл бұрын
@@SchwayZ thanks man
Looks like I found another channel to subscribe to. Lol
@SchwayZ
3 жыл бұрын
Haha yeah he's got some great Hellraisin 1320 content!
Can you test it out first for me? I wanna see how well they hold up. 🤔
@SchwayZ
3 жыл бұрын
Haha I'll do my best not to scrape it but if I do I'll let you know how it holds up!
That's a great idea bro! 👍💯👍 Unfortunately mine is already scraped so f**k it! 🤣🤣🤣
@SchwayZ
3 жыл бұрын
Hahaha it's almost impossible not to scrape it 😂😂😂 I don't blame you. Thanks for watching!
Another great product is Sliplow... And you don't have to remove anything
Didn’t the revits screws went through the splitter making holes 😱
Where was it actually scraping
🔥🔥🔥🔥🔥🔥🔥
@SchwayZ
3 жыл бұрын
Thank you man!🙏🙏🙏
@salimfaysal6651
3 жыл бұрын
@@SchwayZ my pleasure keep your nice video's man
@SchwayZ
3 жыл бұрын
@@salimfaysal6651 thanks man I will do my best to keep it up!
@salimfaysal6651
3 жыл бұрын
@@SchwayZ inshallah man ✌ 😉
Will this work on the Sxt?
@SchwayZ
2 жыл бұрын
If you get the non widebody version on their website then it should
@callofbooty7560
2 жыл бұрын
@@SchwayZ thanks for the reply. I've been trying to get a hold of zl1 addons for a week and no reply so I appreciate it.
@SchwayZ
2 жыл бұрын
@@callofbooty7560 not a problem. Hope that helped. I think they have narrow and widebody versions but I don't know for sure if it's specific to the hellcat bumper Edit. Looks like they have options for non widebody non hellcat ones they just look a little different
I would do it for surr
@SchwayZ
3 жыл бұрын
It's really nice!
How can I get one of those awesome Schwayz shirts?
@SchwayZ
3 жыл бұрын
Lol soon! Merch will start coming out once I hit 10k subs
@purplebee395
3 жыл бұрын
@@SchwayZ I'm passing you along to all my family and friends, great content keep it up! I need that shirt! I live 50 miles from Grand Junction, wish I was around in October to see the Hellcat! Have a 2016 Plum Crazy scat pak Shaker! She's my baby, just don't tell my wife I said that lol🐝
@SchwayZ
3 жыл бұрын
@@purplebee395 really appreciate that man! I'm really glad you enjoy it enough to send it to your friends and family! Yeah that would have been awesome to see one of my subscribers! Hahaha hey man I get it. I love the plum crazy purple especially with the shaker hood. Gorgeous ride brother!
You need a set of RaceRamps
@SchwayZ
3 жыл бұрын
Sounds like you didn't watch the video. I said that in video
@willardarmbruster8111
3 жыл бұрын
Yes my comment was premature. I'm obtaining a few items while I await my SPWBS. I have the ZL1 rock guards, sto n sho plate holder for adaptive cruise. Haven't bought this yet. Not so worried about disassembly, just reassembly.
@SchwayZ
3 жыл бұрын
@@willardarmbruster8111 that's way cool. Yeah I'd definitely recommend this one for your list of items. has saved my butt a few times
If only I didn't already scrape my front splitter lmao
@SchwayZ
3 жыл бұрын
Haha i hear ya man! i was really surprised i didnt' scrape mine already
❤🇺🇸💪
Some strong words haha. It'd be cool if you could just 3D print out shit for our cars huh. Think that would fit a T/A? I might plasti dip the shit out of it... or something.
@SchwayZ
Жыл бұрын
If you're T/A is widebody (sorry I can't remember if they made the T/A in a widebody) then it should otherwise you should get the narrow body version that they sell
Don't run it into anything