💡How to prevent flashback burns on your material with these ingenious honeycomb pins!
Тәжірибелік нұсқаулар және стиль
➡️ Click on ...more↙️for the LASER RAFFLE and other Links!
👍 Link to AF Pins:
🔗 afpins.com
➡️ My version of material standoffs are available in my online store:
🔗 engraveandcutfiles.com
The Raffle you've all been waiting for! The LaserMATIC 20!
➡️ lahobbyguy.com/lasermatic20
This raffle has now ended
The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
➡️ rolyautomation.com/lnJ4A7
The LaserMATIC 10, 20 & 30W are now IN STOCK!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
Most of the products I use in my videos are available in my Amazon Store:
🔗 www.amazon.com/shop/thelouisi...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutfiles.com/
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145045320
Check me out on Rumble! rumble.com/c/c-3325164
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikecloud.com/
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com/magnets
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com/4standoffs
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com/bedlegs
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
👉 This is a special VIEWER ONLY package deal!
🔗 lahobbyguy.com/package
Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
Take an ADDITIONAL 7% OFF with
Coupon Code: ➡️ HobbyGuy
=======================================
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/lahobbyguy
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com/lburn
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com/lb-keys
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroadcollection.com/...
info@walnutroadwood.com
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwoods.com/
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/44TfKGdByI9o
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic
Пікірлер: 118
*Don't forget about the 20 pack of individually wrapped 1/8 inch (3mm) - 12x12 Baltic Birch for $27.18! That's $1.36 each!* This is the cheapest price on Amazon for this type wood, and being individually wrapped guarantees they are flat and ready to use, every time! This is a GREAT FIND! amzn.to/3NE8PgT
Just invested in myself and ordered a set. Thanks!
@TheLouisianaHobbyGuy
7 ай бұрын
Hope you enjoy them!
great idea Rich. thanks for giving us this info.
@TheLouisianaHobbyGuy
Жыл бұрын
You bet! Thanks for watching!
Great info! Will order shortly. Thanks Rich!
@TheLouisianaHobbyGuy
Жыл бұрын
Awesome, thanks for supporting small business!
Thanks!
@TheLouisianaHobbyGuy
Жыл бұрын
You bet! Thank you for the support! 👍
I have been burning good wood with my laser for about 6 months now and understanding how to prevent flashback will save me time and money - big thanks.
@TheLouisianaHobbyGuy
11 ай бұрын
Awesome! 👍 Thanks for watching!
Great product thanks for sharing 👍
@TheLouisianaHobbyGuy
11 ай бұрын
Thanks for watching David!
Thanks Rich! Just ordered a set for my LM10.
@TheLouisianaHobbyGuy
Жыл бұрын
Enjoy!
your tips and tricks as usual are top notch thank you ( My confidence is getting better )
@TheLouisianaHobbyGuy
Жыл бұрын
Happy to help! Thank you!
I use two magnets at each location I secure it to the bed. One on the bed and one just above it on top of the wood. Having said that I really like this option and just placed an order. BTW she has a place on the order form for notes. I put in there that I heard about her pin here on your channel.
@TheLouisianaHobbyGuy
Жыл бұрын
Great idea with the magnets! I never even thought of that! Thanks for the shout out!
I have designed some 3D printed hold down pins for myself in the past, but had not seen the stand-off style before. The results look great. Will definitely be handy for smaller CO2 machines without a downdraft table.
@TheLouisianaHobbyGuy
Жыл бұрын
I have printed several of my own in the past Geo with a similar design. They work really well.
Great info.
@TheLouisianaHobbyGuy
Жыл бұрын
Glad you think so Carl!
Nice video and very useful!
@TheLouisianaHobbyGuy
Жыл бұрын
Glad to hear that!
Thanks for sharing. Not available in uk but just made some from 5mm ply.
@TheLouisianaHobbyGuy
Жыл бұрын
Great 👍
@thelouisianahobbyguy thanks for the inspiration! Currently prototyping my own standoff pins that have a 5mm and 3mm gap in each pin 😉
@TheLouisianaHobbyGuy
Жыл бұрын
Sounds great! I just designed and ran off my first set on the printer myself!
Thanks Rich!!! Great idea and great video.....BTW your lookin' healthy brother!!
@TheLouisianaHobbyGuy
Жыл бұрын
Thank you Sir!
Thank you for recommending these AF Pins! I ordered some & they work great! They not only have eliminated the flashback but my cuts are so much better & require fewer passes!
@TheLouisianaHobbyGuy
11 ай бұрын
Glad I could help!
Never mind, I found them at your store, thanks!
@TheLouisianaHobbyGuy
Жыл бұрын
No problem 👍
I have wondered how to eliminate the need to sand the back side of my work. Thank you for sharing this very important information. I do like to support small businesses and I will check this out. Soooo much to learn, but thanks to you and these videos, I am able to do some pretty amazing work. 😊
@TheLouisianaHobbyGuy
11 ай бұрын
Glad it was helpful!
Great video Rich, and what a brilliant idea. I think I'm going to try and design & 3D print my own set of pins. I have the exact problem you were mentioning about having small areas that don't quite burn through and I end up having to use my knife to cut them out. I can see how flashback would cause this issue. Bravo for posting this video... catch ya later!!!
@TheLouisianaHobbyGuy
9 ай бұрын
Awesome! 👍 Thanks for watching!
After watching this video, I decided to try this. I ordered the spacers and had them 3 days later. I immediately tried to burn a Christmas ornament and compared it to a previous ornament I cut earlier this week. There was a substantial difference between the two. Thank you again Rich for a job well done. You are the ACE for laser cutting and engraving information.
@TheLouisianaHobbyGuy
11 ай бұрын
Glad I could help!
Busted , you still have the bypass jumpers in. lol
@TheLouisianaHobbyGuy
Жыл бұрын
Yep! 🤪 Got to, to make videos!
Hey All Ordered these pins and my honeycomb is an odd size. APins worked with me. Made new ones for me.There customer service is A1. The pins are great! 7:56
@TheLouisianaHobbyGuy
11 ай бұрын
Glad to hear it!
Funny you just put this out. The ones from your website are too big for the Roly laser bed. I had to modify it to get it to work.
@TheLouisianaHobbyGuy
Жыл бұрын
The ones on my website fit every laser. I've used them on the LaserMATIC 10.
Very cool idea. Rich, I looked for your hold down pin file on your website , but couldn't find them.
@TheLouisianaHobbyGuy
Жыл бұрын
Search for pins on engraveandcutfiles.com.
Sadly the hold-down pins aren't available over the pond😢 I'll have to make some myself.
@TheLouisianaHobbyGuy
Жыл бұрын
Oh, sorry to hear that!
Great idea for the Pins the only problem NO Shipping to Canada
@TheLouisianaHobbyGuy
Жыл бұрын
Ah, too bad!
Very nice idea, I did a search to see if I can find some stl files since I have a 3d printer, I saw several different styles that got me thinking. Time to fire up Fusion 360 and do some designing. I think I'll work on a magnetic version.
@TheLouisianaHobbyGuy
Жыл бұрын
Oh, great idea!
@TheUnofficialMaker
Жыл бұрын
hope you will make the design available :)
@TheLouisianaHobbyGuy
11 ай бұрын
I'm working on some.
I might be dumb, but if I'm already using magnets to hold pieces down/aligned... couldn't I just stick a magnet under the piece, and then on top?
@TheLouisianaHobbyGuy
11 ай бұрын
Yes, of course you could!
I have a 3d printer but decided against printing these standoffs. I opted to laser cut them out of birch plywood. They're much stronger than the 3d printed design... I wish I could post a photo.
@TheLouisianaHobbyGuy
11 ай бұрын
I have several different styles. The 3D printed ones are my favorites. You can also achieve the same results with magnets. One on top and the other under the piece. Lots of ways to standoff your work.
@stepheniley
11 ай бұрын
@@TheLouisianaHobbyGuy here's a quick video of still images of what I done... It's harder to explain to be fair. kzread.info/dash/bejne/fmqgj6aJosa9mbA.html
@stepheniley
11 ай бұрын
@@TheLouisianaHobbyGuy by the way.. Love the inspiration that I get from your videos!
I looked but I don't see the file for the wood standoffs in the online store. Found the tee pins, but not the standoffs.
@TheLouisianaHobbyGuy
5 ай бұрын
I believe they're on my free forum.
the same can be achieved by placing a thin magnet on both sides.
@TheLouisianaHobbyGuy
Жыл бұрын
You would need a magnet on both sides of the material to stand it off from the bed.
What about wood with bow. I can’t seem to get flat wood to save my life
@TheLouisianaHobbyGuy
3 ай бұрын
Using pins will help.
Standoffs are great for hard surface materials, and really does improve the finished product, but not so great for things like thinner leather or paper.
@TheLouisianaHobbyGuy
Жыл бұрын
I don't need them for those items. Just thicker material at slow speeds.
@tassiespirit
Жыл бұрын
@@TheLouisianaHobbyGuy I do need something because I do 80% leather and so I use a lot of thing yellow painters tape, with low tack.
@TheLouisianaHobbyGuy
11 ай бұрын
I use laser transfer tape for leather.
What would you recommend for people cutting cardstock and fine art paper?
@TheLouisianaHobbyGuy
9 ай бұрын
Cardstock doesn't require anything since the power is very low and the speed is very fast.
where could i find that honeycomb pin art library
@TheLouisianaHobbyGuy
2 ай бұрын
engraveandcutfiles.com
DIODE & Co2
@TheLouisianaHobbyGuy
Жыл бұрын
You had to comment on the Patreon post, not here.
But how can I solve it if I need the entire work surface?
@TheLouisianaHobbyGuy
2 ай бұрын
I guess you have to get creative!
Hi. These sound amazing. I went to your website and had no idea what to order. I have a Glowforge pro. I’m pretty new to lasering. Can you assist which pins to buy ? Thank you so much !
@TheLouisianaHobbyGuy
4 ай бұрын
No Karen, I know nothing about the size to order for the Glowforge. Try asking in one of their groups. And that wasn't my website, by the way. That was a 3rd party small business.
I CAN'T FIND THEM
@TheLouisianaHobbyGuy
Жыл бұрын
You can't find what?
Hello Sir, You appear to have Light Burn down to a science. That being said perhaps you can explain why I can never get anything the actual size I want. When I put width and height in at the top of the screen the image is never that size. Example: I want an image to engrave at 3 inches tall I get 2 3/4 inches tall . Framing before engraving doesn't match either, it's always much larger than the size I want the engraving to be. I have changed from mm to in and in to mm, makes no difference. I never get the final engraving at the dimensions I need.
@TheLouisianaHobbyGuy
Жыл бұрын
Try this video: kzread.info/dash/bejne/qGyfsapufcapmrw.html
I love the idea of these, and supporting small businesses. But, I don’t feel comfortable buying from a site with no company information. An about page with “her” story would be great. Just some advice for a new business person.
@TheLouisianaHobbyGuy
Жыл бұрын
Agreed, but she is vetted.
so 10-5 for CO2 laser with 1/4" ply
@TheLouisianaHobbyGuy
11 ай бұрын
Yep! 👍
Looking for the Honeycomb Art Library and can't find it. Is the one in the video available and if so where.
@TheLouisianaHobbyGuy
Жыл бұрын
The honeycomb pins are available for free in my store: engraveandcutfiles.com
@garyb3323
Жыл бұрын
@@TheLouisianaHobbyGuy I have found the 'Honeycomb Bed Hold Down Pins' file and downloaded it but it does not have the other elements that are shown and you use as an example in the video. They are what I would like to find. I guess I could design my own but I was hoping to be able to find all the different ones that are visible in the Art Library you have in the video.
@TheLouisianaHobbyGuy
11 ай бұрын
The pins in the video are for sale on her website. Link in the description. She sent me the finished product, not stl files.
What grip size? 3mm or 5mm? Low profile or regular.
@TheLouisianaHobbyGuy
Жыл бұрын
That's the choice, 3mm or 5mm. It depends on what size wood you're going to use. I like having both.
Pin size 8mm for LM10?
@TheLouisianaHobbyGuy
Жыл бұрын
It should be 8mm.
diode
@TheLouisianaHobbyGuy
Жыл бұрын
If you're a Champion supporter trying to enter the drawing, you have to comment on the Patreon post. It's private.
Diode
@TheLouisianaHobbyGuy
Жыл бұрын
If you're a Champion supporter trying to enter the drawing, you have to comment on the Patreon post. It's private.
DIODE
@TheLouisianaHobbyGuy
Жыл бұрын
You had to comment on the Patreon post, not here.
AWWWWWWW rats, only availble in the USA. So looks like I have to fire up the 3D Printer
@TheLouisianaHobbyGuy
Жыл бұрын
You need to move here Ian! 🤪
@emmastalker1784
Жыл бұрын
Are you in UK? Would you sell some? Thanks Emma
@TheLouisianaHobbyGuy
11 ай бұрын
No, I'm in the USA. _Louisiana_ Hobby Guy.
CO2
@TheLouisianaHobbyGuy
Жыл бұрын
What does this mean? If you're a Champion supporter trying to enter the drawing, you have to comment on the Patreon post. It's private.
Very nice pins. I wish she would sell the stl files so we could just print our own! Would be worldwide too!!!
@TheLouisianaHobbyGuy
Жыл бұрын
Maybe one day Mike!
Thanks!
@TheLouisianaHobbyGuy
Жыл бұрын
You bet! Thank you for the support!
Thanks!
@zakgilman5883
Жыл бұрын
Awesome Rich. I really enjoy your videos. I just started this hobby Feb 2023, and enjoying every minute of it. You've been a great source of information and wouldn't have known how to use my diod had it not been for you videos. Keep up the good work.
@TheLouisianaHobbyGuy
Жыл бұрын
Wow, great to hear! And thanks so much for the support! 👍