How to port a chainsaw part 9: Chamfering the ports.
How to chamfer ports, a very important step in porting.
Жүктеу.....
Пікірлер: 92
@joebrent2762 Жыл бұрын
I was a truck mechanic for years and now, with your help, will turn my attention to power saws thank you so much for the education! Very easy to understand. Thank you for sharing your information because knowledge is no good to anyone unless it's shared!
@scottirwin1693 Жыл бұрын
I have been doing port work on 2 strokes for the last 20 plus years. I didnt play around with powersaws untill recently. All my port work was on the old yamaha rd400s and 350s. I will tell you this series is the bible for people getting into porting. On a 2 stroke. Bike or saw or even outboards. Tinman you my friend are the shit. Love the content KEEP IT UP BROTHER.
@tinmanssaws
Жыл бұрын
Thanks buddy!!
@seather8633 жыл бұрын
Tinman porting dentistry, looking good. We are learning quite a bit from the porting video series. Thanks for sharing.
@willisfranks24763 жыл бұрын
Thank You Buddy. I am learning so much from you. I love the way you explain and show us. Keep up the Great work my friend. Much appreciated. Take Care, Stay Safe and Be Kind...
@johnnyrotten200 Жыл бұрын
"I'm doing this for the first time guy" And it is much appreciated, amigo!
@Finom13 жыл бұрын
Tinman, Bless you for this educational porting series. Just the best. Hit that Like Button!!!
@sneff34072 жыл бұрын
So thankful yo made all these videos now I understand how to port a power saw. Thanks so much Tinman !
@jasonmcclure93359 ай бұрын
Thanks for doing the porting and cut away series.
@shaner673 жыл бұрын
Tinmaaaaan, hope you are surviving this deep freezing cold without too much damage. Thanks again for the great information you provide on this channel. Keep on building fantastic power saw content because you are damn good and it!! SLANT'E
@larryreno82933 жыл бұрын
Great series Tinman. I’ve been contemplating porting my ms460 and since you posted this series I’ve completed the 460 with good results and no mishaps. I’m now into my ms250 but waiting for parts. Thank you for sharing your wealth of knowledge with the rest of us. And if you would be so kind, please explain to my wife that it’s your fault I’m in the shop so much lately. 😃
@tinmanssaws
3 жыл бұрын
Hahaha you're on your own with your wife buddy hahahahaha
@larryreno8293
3 жыл бұрын
@@tinmanssaws good lookin out...lol
@larrysutton65303 жыл бұрын
I can't speak for anyone else but I'm learning a lot from you and regardless of how you see yourself you know 1000 times more than I do. Not to mention you have a real knack for explaining things so that everyone should be able to understand
@gettingoutofbeekeeping8523 жыл бұрын
Thank you for all your effort, these will get views and appreciation long into the future!!
@apummakii3 жыл бұрын
thank you so much for his tinman, your truely killing it man! the detail an Camara work is just unreal. thanks for being you man!
@robertdouglas34563 жыл бұрын
Nice video!. Your detail is excellent on the porting & chanfering!..
@papapetad3 жыл бұрын
These are great videos with clear, detailed instructions. Thank you for taking the time to share your experience!
@brentibeling63293 жыл бұрын
I appreciate your time and putting in the effort to help port. Thanks again. 😊
@jeffreyrubish3473 жыл бұрын
Very nice series on porting, Tinman!
@stevetheriault41643 жыл бұрын
GREAT LEARNING CURVES THANKS FOR EXPLAINING EVERYTHING ,YOU KAKE IT EASY TO UNDERSTAND YOUR VIDEOS THANKS FOR ALL YOUR HARDWORK TINMAN LEARN SOMETHING NEW EVERY VIDEO ,BE SAFE BUDDY
@rickforsty94103 жыл бұрын
Thanks for sharing all your knowledge on the hole series Tinman!!
@joshdurrant92473 жыл бұрын
Tinman's tips and tricks, always helpful! Thanks Tinman for the great insight and the help you're giving us 👍👍💪💪💪😎!
@sethgarrett19943 жыл бұрын
I just wanna say I love the work you do your work is very impressive and you make it fun and easy to learn porting ive been studying porting for a year now and in the past month since ive started watching your videos ive learned more from you than I have the entire past year and since then I got a degree wheel, rotary tool tungsten carbide bits, digital calipers, extra basegaskets and an extra cylinder and piston I build motorized bikes and engines as a hobby and transportation I just wanna say thank you because you've helped me take my skills to the next level
@asgenkarlson27033 жыл бұрын
Tinman, you're a legend. Keep up the great instructional videos. Can't wait to see this Echo throw a big ole rooster tail of chips. Ba ba BAAAAAH!!
@G-PA-27953 жыл бұрын
Beautiful Port work Tinman. Perfect timing with the video. -12° and snowing like crazy tonight. Thanks
@mrxlh3 жыл бұрын
Excellent explanation of exactly why this needs to be done, as always thanks for sharing your knowledge to everyone out there. I’m excited to see this saw run, I’ve run a few echos and they all seemed turdy to me, which really intrigues me due to the numbers this one was stock.
@ClintsHobbiesDIY3 жыл бұрын
I had been waiting on this vid. Thanks Tinman and congrats on 9 K subs.
@kevinmaxam24143 жыл бұрын
Your descriptions as you do it and vid work is great. Thank you sir, be safe and be careful.
@DaveyBlue322 жыл бұрын
This is really important and I’m really glad that you really say this bit at the end about in everything that we do that making a good smooth bevel or easing the port bevels or edge’s is so important. The exhaust port window bevels are huge in there function of helping to push that very hot and soft ring back into the ring groove… most people don’t realize that their piston ring is actually protruding into the exhaust port window for a little bit while the piston is in that position there’s nothing supporting the ring… why Stihl for all those 0-series cylinder’s had the bird beaks on their exhaust. And the Mac’s actually ran the bar’s across the exhaust port to keep their rings supported…
@TheNorvikWay3 жыл бұрын
Tinman great job with the camera angles it real shows in detail what your trying to explain. Its helps show me or anyone else what it should look like....awesome job man ...thanks
@robertwyble3 жыл бұрын
Thank you Tinman. Well done.
@simpleman42243 жыл бұрын
More great info! Thanks for sharing buddy!
@kennytree88013 жыл бұрын
Your knowledge is priceless thank you Tinman 🙂🙏🤙Tinman you are very genuine & humble congratulations
@noelwest82343 жыл бұрын
Thank you Tinman. I love the cutaway.
@blanko84633 жыл бұрын
Thanks! That was a great easy to see what is going on video. Appreciate the effort going into making these! Ported a moped about 30 years ago - wouldn't even run when I was done, didn't know what I was doing. Ported a saw last week - amazing, can't believe how great it runs. I have that exact echo, and it hardly gets used, because it is a little heavy, and kinda slow, even with muffler mod. My Jonsered 2260 smokes it, and feels like a 50 cc saw, so why bother with the brick saws! I'm going to port the echo 67cc, mild, similar to what you just did. And, I'll let you know how it runs. Really, it is only 1 or 2 lbs heavier than the Jonsered, and should be able to pull a longer bar/chain (running 24" on it right now, and 20 on Jonesred). Maybe with a 24" Oregon versa cut - a little lighter - it won't be a bad bucking saw. Plus, a fun project! And, will keep the saw from sitting on the shelf. Thanks again!
@roncorbin15003 жыл бұрын
Good Video Tinman, vary informative .
@z1berzerker7 ай бұрын
The Devil 🤘 is in the Details 👍😎 Great Tutorial
@Magoot24566 ай бұрын
Hey tinman i have an awesome idea for people when chamfering cylinders! Cover both sides of the edge with sharpie (so whole corner is blacked out) then when you grind, the chamfered part will obviously be bright and shiny, may make it easier to see how consistent your chamfers are too! Im gonna try this and see if it works as good as it sounds :) take er easy big dog!
@johncrawford58712 жыл бұрын
That cut away is awesome.
@user-gc2kh7so3c2 жыл бұрын
Thanks for your inspirations I was a bronze level Stihl Power Equipment mechanic for 15 years went Trucking for 12 purchase many carcasses private and eBay with only aftermarket parts available for some of these forty and fifty year old machines porting cylinders is the only way for successful repair that many years of chamfer ports I figured what the hell was very happy with my little o28 with a aftermarket jug performance the wash across the top of the piston after raising transfer was pretty spot-on awesome little saw lot more work than going picking a new cylinder off the Shelf keep teaching you're good at in all my years never looked at a degree wheel explains why this year they got power that year they didn't LOL
@LumberjackSmokestack3 жыл бұрын
Thanks for yet another quality tutorial!
@nickywalsh84923 жыл бұрын
Hi tinman...that cylinder is top class ,that saw will rock n roll when assembled.
@antitactical3 жыл бұрын
Awesome videos. Excited to hear it rip
@MichaelSmith-th4ko3 жыл бұрын
As always great video!! Take care tinman!!
@mike75369 Жыл бұрын
Hi man, great videos, i have learned a lot with you. When i use the dremel in close space, I put tape on it for preserve the surface. Hi from Belgium 😁
@lovegod7133 жыл бұрын
I'm going to be buying a Dremel and those bits you're using this is a awesome video going to be studying and learning all I can I'm going to be porting the chainsaw in my picture Husqvarna 540 Mark II
@robperrin94973 жыл бұрын
Great video. Can't wait for the next one 🙂
@caseycarpenter70433 жыл бұрын
Once again T-man great camera angles and explaining why your getting sharp ridges off Cheers 🍺
@Bungi813 жыл бұрын
Hey Tinman, thanks for this lesson 👍
@mikahakkinen56513 жыл бұрын
great video.if not rounding the port edge its possible allso the pistonr ings catch there .
@timhart26523 жыл бұрын
Love the video's brother..keep them up
@tonyalto10143 жыл бұрын
Cool! Never tried the diamond dust burrs. Looks like they work great. Faster than the Cratex. I'll have to try them. Thanks for the tip!
@gustavogartner31453 жыл бұрын
Excelente amigo
@edwinhsingmaster91353 жыл бұрын
Timing you got me hooked. Mechanics my trade, and have done a little hot rodding. OK For starters HF flex cable, already done muffler on my MS170. Next question compression, and possible base gasket delete 🤔. Dang thing doesn't have a base gasket. Workjn on Plan B. Thanks
@waydehamm79283 жыл бұрын
I can tell you've been at this a while lol , nice lite touch 👍 great job , mine are a bit rougher but not bad , and I getting more comfortable watchin you and Ironhorse
@robertwoerner20 Жыл бұрын
It's because of this series and some of your other videos, that I have successfully ported 2 saws. First was an echo 590 just did a mild job. The next is a 372xp, that I went a little crazy on. This saw rips a 28" like crazy. May try some different pin sprockets to see how she pulls once broken in.
@ozdatman3 жыл бұрын
Good stuff. Getting exciting now, all you have to do is try not to play too much with your new Macs. You are going to be known as Tinman with all the toys. Cheers from Tassie.
@passingitalong53173 жыл бұрын
great camera work
@stephaneracicot7913 жыл бұрын
good job man,im gona do my 272xp
@jpaulo94902 жыл бұрын
Super....
@matthewworkshop53713 жыл бұрын
cut a slot in a nail Or into a wooden dowel and then put your sandpaper in it or you could put super glue and wrap it around that works really good for polishing the inside of a port ;-)
@Chuckrussell752 жыл бұрын
Oh that's awesome. I was tryin to figure out what burr to use for my chamfers. I broke all my edges in my piston like Harv does & blended it all in. Dude I was going to ask what you thought about porting a mildly used jug & piston. This is my first attempt porting, so I do plan on getting a new top end. I just thought trying this with used stuff would be ok for a try. Thanks so much my friend. I'm learning a lot. Chad from Michigan 👍
@randyforestier72563 жыл бұрын
nice video Tinman. I think your the only one that has shown that. That I've seen.
@gregorydobson43073 жыл бұрын
Nice one Tinman yet again some great tips & tricks. Am I right thinking that the finish on the inlet & transfers doesn't matter but the exhaust should be smooth.
@Lifeinthe9063 жыл бұрын
More great information Tinman I can't wait to get started. I will probably watch the whole series as I do my first port job. You mentioned the oil you use what was it? I've been looking to try something different than the stihl ultr I've been using. Thanks again Tinman
@garengtutorial8923 Жыл бұрын
😮 keren 👍
@gustavogartner31452 жыл бұрын
👍
@1ybuzz3 жыл бұрын
Great how to videos. Thanks. Do you hone all your cylinders when you are done ?
@JasonTylerRicci2 жыл бұрын
When buying aftermarket cylinders, is it a good idea to chamfer the ports?
@nickywalsh84923 жыл бұрын
Is it possible to over do the chamfer and end up snapping a ring? Dead center of exhaust port..not once but 4 times..
@NothingButChainsaws2 жыл бұрын
How do you do upper transfers with just a dremal?
@colvinwellborn3 жыл бұрын
Tinman, how do you clean your cylinders out after grinding on them?
@colinmckee3323 жыл бұрын
Tinman, great filming and instructional video... By chance where do you get your diamond bits and double cutting bits? I would like to support local if possible!!
@billybm09 ай бұрын
Does honing the cylinder fix those accidental plating marks
@curtisbaker54073 жыл бұрын
What kind of dremel are you using? I like that alot..great job...and thanks for all the helpful info..i write all this down on hard copy from you and Ironhorse...love you guys
@juicebox413 жыл бұрын
Tinman, Loved the video. You used 400 grit to put the finishing touches on the chamfer, Do you ever advance to 800 or 100 grit after the 400?
@ambrosebrower87602 жыл бұрын
Can you talk about chamfering cylinders that chip really easily? I’m having a hard time with a highway cylinder that just seems to flake away.
@2eyedjack4333 жыл бұрын
Hey tin man love the series! Question about chamfer, will the small rounding of the edge effect timing?
@tinmanssaws
3 жыл бұрын
No it just helps the rings move in and out of the port.
@ScrewdriverTUNING3 жыл бұрын
💪🏻🪓⚡️. YESSSS.
@xperimental1974 Жыл бұрын
can i use piles to chamfer?
@simpleman42243 жыл бұрын
👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
@marcusrasmussen61433 жыл бұрын
Would you be interested in porting an old Mac 1-60?
@bryanford11393 жыл бұрын
If you don't know where your tool is at ALL times.....that'll DEFINITELY get you in trouble!! 😁😆😂
@johncrawford58712 жыл бұрын
Tinman Could you do a video on the Dremel and all the bits and tools for porting that you use.pls.
@tinmanssaws
2 жыл бұрын
Hi John, Video number 4 in my "how to port a chainsaw" playlist covers that.
Пікірлер: 92
I was a truck mechanic for years and now, with your help, will turn my attention to power saws thank you so much for the education! Very easy to understand. Thank you for sharing your information because knowledge is no good to anyone unless it's shared!
I have been doing port work on 2 strokes for the last 20 plus years. I didnt play around with powersaws untill recently. All my port work was on the old yamaha rd400s and 350s. I will tell you this series is the bible for people getting into porting. On a 2 stroke. Bike or saw or even outboards. Tinman you my friend are the shit. Love the content KEEP IT UP BROTHER.
@tinmanssaws
Жыл бұрын
Thanks buddy!!
Tinman porting dentistry, looking good. We are learning quite a bit from the porting video series. Thanks for sharing.
Thank You Buddy. I am learning so much from you. I love the way you explain and show us. Keep up the Great work my friend. Much appreciated. Take Care, Stay Safe and Be Kind...
"I'm doing this for the first time guy" And it is much appreciated, amigo!
Tinman, Bless you for this educational porting series. Just the best. Hit that Like Button!!!
So thankful yo made all these videos now I understand how to port a power saw. Thanks so much Tinman !
Thanks for doing the porting and cut away series.
Tinmaaaaan, hope you are surviving this deep freezing cold without too much damage. Thanks again for the great information you provide on this channel. Keep on building fantastic power saw content because you are damn good and it!! SLANT'E
Great series Tinman. I’ve been contemplating porting my ms460 and since you posted this series I’ve completed the 460 with good results and no mishaps. I’m now into my ms250 but waiting for parts. Thank you for sharing your wealth of knowledge with the rest of us. And if you would be so kind, please explain to my wife that it’s your fault I’m in the shop so much lately. 😃
@tinmanssaws
3 жыл бұрын
Hahaha you're on your own with your wife buddy hahahahaha
@larryreno8293
3 жыл бұрын
@@tinmanssaws good lookin out...lol
I can't speak for anyone else but I'm learning a lot from you and regardless of how you see yourself you know 1000 times more than I do. Not to mention you have a real knack for explaining things so that everyone should be able to understand
Thank you for all your effort, these will get views and appreciation long into the future!!
thank you so much for his tinman, your truely killing it man! the detail an Camara work is just unreal. thanks for being you man!
Nice video!. Your detail is excellent on the porting & chanfering!..
These are great videos with clear, detailed instructions. Thank you for taking the time to share your experience!
I appreciate your time and putting in the effort to help port. Thanks again. 😊
Very nice series on porting, Tinman!
GREAT LEARNING CURVES THANKS FOR EXPLAINING EVERYTHING ,YOU KAKE IT EASY TO UNDERSTAND YOUR VIDEOS THANKS FOR ALL YOUR HARDWORK TINMAN LEARN SOMETHING NEW EVERY VIDEO ,BE SAFE BUDDY
Thanks for sharing all your knowledge on the hole series Tinman!!
Tinman's tips and tricks, always helpful! Thanks Tinman for the great insight and the help you're giving us 👍👍💪💪💪😎!
I just wanna say I love the work you do your work is very impressive and you make it fun and easy to learn porting ive been studying porting for a year now and in the past month since ive started watching your videos ive learned more from you than I have the entire past year and since then I got a degree wheel, rotary tool tungsten carbide bits, digital calipers, extra basegaskets and an extra cylinder and piston I build motorized bikes and engines as a hobby and transportation I just wanna say thank you because you've helped me take my skills to the next level
Tinman, you're a legend. Keep up the great instructional videos. Can't wait to see this Echo throw a big ole rooster tail of chips. Ba ba BAAAAAH!!
Beautiful Port work Tinman. Perfect timing with the video. -12° and snowing like crazy tonight. Thanks
Excellent explanation of exactly why this needs to be done, as always thanks for sharing your knowledge to everyone out there. I’m excited to see this saw run, I’ve run a few echos and they all seemed turdy to me, which really intrigues me due to the numbers this one was stock.
I had been waiting on this vid. Thanks Tinman and congrats on 9 K subs.
Your descriptions as you do it and vid work is great. Thank you sir, be safe and be careful.
This is really important and I’m really glad that you really say this bit at the end about in everything that we do that making a good smooth bevel or easing the port bevels or edge’s is so important. The exhaust port window bevels are huge in there function of helping to push that very hot and soft ring back into the ring groove… most people don’t realize that their piston ring is actually protruding into the exhaust port window for a little bit while the piston is in that position there’s nothing supporting the ring… why Stihl for all those 0-series cylinder’s had the bird beaks on their exhaust. And the Mac’s actually ran the bar’s across the exhaust port to keep their rings supported…
Tinman great job with the camera angles it real shows in detail what your trying to explain. Its helps show me or anyone else what it should look like....awesome job man ...thanks
Thank you Tinman. Well done.
More great info! Thanks for sharing buddy!
Your knowledge is priceless thank you Tinman 🙂🙏🤙Tinman you are very genuine & humble congratulations
Thank you Tinman. I love the cutaway.
Thanks! That was a great easy to see what is going on video. Appreciate the effort going into making these! Ported a moped about 30 years ago - wouldn't even run when I was done, didn't know what I was doing. Ported a saw last week - amazing, can't believe how great it runs. I have that exact echo, and it hardly gets used, because it is a little heavy, and kinda slow, even with muffler mod. My Jonsered 2260 smokes it, and feels like a 50 cc saw, so why bother with the brick saws! I'm going to port the echo 67cc, mild, similar to what you just did. And, I'll let you know how it runs. Really, it is only 1 or 2 lbs heavier than the Jonsered, and should be able to pull a longer bar/chain (running 24" on it right now, and 20 on Jonesred). Maybe with a 24" Oregon versa cut - a little lighter - it won't be a bad bucking saw. Plus, a fun project! And, will keep the saw from sitting on the shelf. Thanks again!
Good Video Tinman, vary informative .
The Devil 🤘 is in the Details 👍😎 Great Tutorial
Hey tinman i have an awesome idea for people when chamfering cylinders! Cover both sides of the edge with sharpie (so whole corner is blacked out) then when you grind, the chamfered part will obviously be bright and shiny, may make it easier to see how consistent your chamfers are too! Im gonna try this and see if it works as good as it sounds :) take er easy big dog!
That cut away is awesome.
Thanks for your inspirations I was a bronze level Stihl Power Equipment mechanic for 15 years went Trucking for 12 purchase many carcasses private and eBay with only aftermarket parts available for some of these forty and fifty year old machines porting cylinders is the only way for successful repair that many years of chamfer ports I figured what the hell was very happy with my little o28 with a aftermarket jug performance the wash across the top of the piston after raising transfer was pretty spot-on awesome little saw lot more work than going picking a new cylinder off the Shelf keep teaching you're good at in all my years never looked at a degree wheel explains why this year they got power that year they didn't LOL
Thanks for yet another quality tutorial!
Hi tinman...that cylinder is top class ,that saw will rock n roll when assembled.
Awesome videos. Excited to hear it rip
As always great video!! Take care tinman!!
Hi man, great videos, i have learned a lot with you. When i use the dremel in close space, I put tape on it for preserve the surface. Hi from Belgium 😁
I'm going to be buying a Dremel and those bits you're using this is a awesome video going to be studying and learning all I can I'm going to be porting the chainsaw in my picture Husqvarna 540 Mark II
Great video. Can't wait for the next one 🙂
Once again T-man great camera angles and explaining why your getting sharp ridges off Cheers 🍺
Hey Tinman, thanks for this lesson 👍
great video.if not rounding the port edge its possible allso the pistonr ings catch there .
Love the video's brother..keep them up
Cool! Never tried the diamond dust burrs. Looks like they work great. Faster than the Cratex. I'll have to try them. Thanks for the tip!
Excelente amigo
Timing you got me hooked. Mechanics my trade, and have done a little hot rodding. OK For starters HF flex cable, already done muffler on my MS170. Next question compression, and possible base gasket delete 🤔. Dang thing doesn't have a base gasket. Workjn on Plan B. Thanks
I can tell you've been at this a while lol , nice lite touch 👍 great job , mine are a bit rougher but not bad , and I getting more comfortable watchin you and Ironhorse
It's because of this series and some of your other videos, that I have successfully ported 2 saws. First was an echo 590 just did a mild job. The next is a 372xp, that I went a little crazy on. This saw rips a 28" like crazy. May try some different pin sprockets to see how she pulls once broken in.
Good stuff. Getting exciting now, all you have to do is try not to play too much with your new Macs. You are going to be known as Tinman with all the toys. Cheers from Tassie.
great camera work
good job man,im gona do my 272xp
Super....
cut a slot in a nail Or into a wooden dowel and then put your sandpaper in it or you could put super glue and wrap it around that works really good for polishing the inside of a port ;-)
Oh that's awesome. I was tryin to figure out what burr to use for my chamfers. I broke all my edges in my piston like Harv does & blended it all in. Dude I was going to ask what you thought about porting a mildly used jug & piston. This is my first attempt porting, so I do plan on getting a new top end. I just thought trying this with used stuff would be ok for a try. Thanks so much my friend. I'm learning a lot. Chad from Michigan 👍
nice video Tinman. I think your the only one that has shown that. That I've seen.
Nice one Tinman yet again some great tips & tricks. Am I right thinking that the finish on the inlet & transfers doesn't matter but the exhaust should be smooth.
More great information Tinman I can't wait to get started. I will probably watch the whole series as I do my first port job. You mentioned the oil you use what was it? I've been looking to try something different than the stihl ultr I've been using. Thanks again Tinman
😮 keren 👍
👍
Great how to videos. Thanks. Do you hone all your cylinders when you are done ?
When buying aftermarket cylinders, is it a good idea to chamfer the ports?
Is it possible to over do the chamfer and end up snapping a ring? Dead center of exhaust port..not once but 4 times..
How do you do upper transfers with just a dremal?
Tinman, how do you clean your cylinders out after grinding on them?
Tinman, great filming and instructional video... By chance where do you get your diamond bits and double cutting bits? I would like to support local if possible!!
Does honing the cylinder fix those accidental plating marks
What kind of dremel are you using? I like that alot..great job...and thanks for all the helpful info..i write all this down on hard copy from you and Ironhorse...love you guys
Tinman, Loved the video. You used 400 grit to put the finishing touches on the chamfer, Do you ever advance to 800 or 100 grit after the 400?
Can you talk about chamfering cylinders that chip really easily? I’m having a hard time with a highway cylinder that just seems to flake away.
Hey tin man love the series! Question about chamfer, will the small rounding of the edge effect timing?
@tinmanssaws
3 жыл бұрын
No it just helps the rings move in and out of the port.
💪🏻🪓⚡️. YESSSS.
can i use piles to chamfer?
👍👍👍👍🇺🇸🇺🇸🇺🇸🇺🇸🙏🙏🙏🙏
Would you be interested in porting an old Mac 1-60?
If you don't know where your tool is at ALL times.....that'll DEFINITELY get you in trouble!! 😁😆😂
Tinman Could you do a video on the Dremel and all the bits and tools for porting that you use.pls.
@tinmanssaws
2 жыл бұрын
Hi John, Video number 4 in my "how to port a chainsaw" playlist covers that.
Cant wait to see this saw rip into some wood.
Just another comment for the algorithm 😉
I am so afraid of the dentist
1st!!