My urge to buy and bend some Plywood, MDF and such, paint it, gloss it out and make a sci-fi livingroom intensifies, it intensifies a lot.

Best video on this subject so far

He made this look so so sooo much easier than it actually is. Great job sir.

Looking good

super work thanks

NIce job Henry

Nice job😎👍

Thank you!

wow👌✌

Very good job

I learning how to get high gloss finish ... look very controversial what different product are outside some suggest mirka or 3m are not too expensive but compare with your way its look very easy and affordable...

Can you use this approach with a solvent based gloss paint? The sort that Dulux sell? Can you polish that up to this sort of high shine?

Henry did you not still have holograms left from the rotary from the second polishing step. Should you not use a finishing polish with a da as your last polishing step

@OSRENOfficial

8 жыл бұрын

It was very minimal, in which at the end of the video, I recommended a blue foam with the wax for final finishing.

good working sir im majeed khan im woodpolisher sir i like

@OSRENOfficial

4 жыл бұрын

I hope this helped

What type of paint did you use (brand and type of finish) to paint the wood? And how many coats did you give it before sanding it? Thank you!

@OSRENOfficial

6 жыл бұрын

Hi Grisy, I'm sorry but I don't have information on that. The panel was sent by a factory in Indonesia for us to study the best polishing method and propose it to them. They did not disclose any information on which paint and clear was used for that panel.

@grisytrujillo1539

6 жыл бұрын

thank you anyway! 👍🏼

@WeBuild4Life

6 жыл бұрын

Grisy trujillo it was most likey an acrylic lacquer sprayed on

@tranzco1173

4 жыл бұрын

@@OSRENOfficial Then it's voodoo. That could be anything.

If you've painted wood with a high gloss paint already can you skip to the last step with the crystal liquid?

@OSRENOfficial

7 жыл бұрын

The crystal liquid (wax) will give it a nice waxy feel when you touch the finish. It's something optional I would say

@JoeyPierce

7 жыл бұрын

OSREN (MALAYSIA) SDN BHD Thanks 👍

Does this method work on scratched high gloss black Formica type laminates?

@OSRENOfficial

5 жыл бұрын

Hi Tarey, unfortunately, you can't. There is nothing we can do about it.

@tareyallen1553

5 жыл бұрын

Ok, thanks..@@OSRENOfficial

Is this the same technique for piano black gloss finish?

@OSRENOfficial

2 жыл бұрын

Hey Kenneth! Yes overall technique is the same. Probably require to tweak certain pads and polishes depending on the actually finish (hard, chewy, crispy) of the clear coat

@kennethteo7974

2 жыл бұрын

@@OSRENOfficial thank you for replying!

So polishing wood has anything to do with car polish?

@OSRENOfficial

7 жыл бұрын

Hi Gary Lee, technically high gloss wood panels are painted with 2K system which is the same as car paint. Products, pads and polishing procedures are the same.

@gandibachi87

7 жыл бұрын

does that panel have just paint on it or paint and a clear coat?

@nahuelgalmarini117

3 жыл бұрын

Raja Suri it has a 2k clear on top of the black base coat other wise if it was paint it wouldn't have that gloss.

What about vertically

@OSRENOfficial

6 жыл бұрын

Hi Arihant, the process for polishing vertical panels are similar to horizontal panels.

It's good to see Woodglut have new instructions to save my money and energy to build it.

what is that white product that u used help plz

@OSRENOfficial

4 жыл бұрын

Hi Khaled! There’s quite a few white products in the video 1. Perfect 40 Compound 2. NAO 46 Compound 3. 4ply 100% Twisted Wool Pad

@khaledbelaid92

4 жыл бұрын

@@OSRENOfficial thank you so much

Why not just paint it with high gloss paint in the first place.

@topdeckdog

6 жыл бұрын

go for it, then make a video showing us how much worse yours looks than this

All these videos out there on how to achieve a high-gloss shine on wood. All have basically the same steps. Not ONE of them talks about what kind of paint to use on the wood BEFORE you start the polishing process. Frustrating...