How to: Pico wind turbine generator tutorial.
Ғылым және технология
A guide to making a pico turbine wind generator. It is charging nicad. 10 cm diameter, 1 - 6ma into the battery. Step by step instructions below and in the video:
www.scraptopower.co.uk/alt-ene...
Пікірлер: 189
Though I ended up breaking the outer frame due to lack of patience. The circuit works .. Thank you.
Very good friend! He was efficient for its size. I liked the idea to extend the helix. Congratulations. Simple to manufacture.
My daughter used your tutorial and won 2nd place in her school's science fair! Thank you!
Yes, should work. It might have a higher cut in speed with the lower voltage though ?
cool build. thanks for showing exactly how you re-wired the fan
Thanks, they were marked on the pcb as W1,W2,W3. I think one is a centre tap on the coils, so I only used two of the connections. But if they're not marked you can just see where the wires go into the pcb from the coils. They're usually the biggest pads on the pcb.
Again stunning work and so simple I love simplicity :-) Greetings from Belgium Erik
this is great inspiration, thanks so much!! I've gone onto your site, too and very impressed :D
Very good work! Thank you for sharing. Dan
what would happen if the fan was rotating the other way? Although I don't understand why you had to rewire the fan, I loved this tut, because it was clear what you're doing. Way to go, hope there are many more to come. ;-)
@98Destructo
9 жыл бұрын
As there is a ac dc converter attached so the power output will be the same.
buena obra habrá que realizarlo para probarlo en ejecución muchas gracias amigo, thanks friend, good work
wow pretty cool, im planing to build one of those but in a different design..a horizontal wind turbine
do you have to take all the fuses, mosfet, and capacitor out for it to work??
I've been watched it 2 hours ago and right n I have my own.! I buil it and tried it and its awesome, but my fan is only 12v but it works like that.! Great!!
Thanks from Turkey. This project is useful.
So, I noticed that there was some IC and electro-wizadry on the board (before you gutted it) and 3 wires going to the motor. Is it possible that the IC was generating some form of 3-phase? If so, a considerable amount more power could be drained from this motor for the same RPM by using 2-stage bridge rectification. Just a thought.
nice video! im going to make it thanks for sharing and uploading!
hood work sir but could u show me the diagram of the rectifier u built coz I m confused
You do need one, I just didn't show how to build it in the video as I couldn't show it well. It's mentioned at 4:03 HTH
if you put an array of transformers, might it generate 220 volts?
Hi, can you please tell me which 2 points you connect to on the coils? Also what is the circuit is like exactly? I tried with a small fan but I could not get even 0.5V with hand spinning. thx
i always like simplicity to the point like this
Hi Mate, I really liked what u did. I need some help. can you tell me, how to store the energy (electricity) generated by the wind on to a battery or so.... like storing the electricity into an empty battery thru wind power
On my DC ,CPU when I took it out ,I saw diode ,and the CPU is not three phase ,I think one phase .Do I need to re solder and make the system like Dc
one question. so fan is making AC current? it says on my fan that its dc , but it produce AC?
thanks for replying. is there other way to change AC to DC cuz i cant find diodes to make a rectifier. if without a rectifier it will just blink right?
how did you know where to solder on the motor?
How and where to connect the rectifier to the pcb of the fan. Confused plz. Help me need to submit it after 4 days . And how to make rectifier ?
Free energy great stuff well done.
Awesome work!!! love it
Hello! I am currently making this for my Science Project! I am confused on the part of building a rectifier, how did you connect it? Thank You so much! :)
Why do you have to re-solder the wires? I just tried out my 12V PSU fan and I seem to get some volts out of if I just stick red and black wires to the electrometer and start hand spinning the fan. As you might have guessed, I'm rather new into this. Thanks in advance if someone enlightens me in this =)
Hi mate ! How do u reconnect and resolder the wires? How do you know.where to replace the wire?
is it possible to up the voltage with a step up transformer?
what would something of this size power?
Ahh, that makes sense. Do you do requests for tutorials? I have an idea.
very confused about this, would like to know all the materials needed for this and which material is which in the video, please get back to me as soon as possible as it is for a school project.
is that rectifier thing significant? what is its function?
How would you convert AC to DC without diodes? The standard way to covert AC to DC is with a rectifier, which is made up of 4 diodes.
Oh , the tick wire that makes the tail and everything , plus the whole unit has another bord attached to it .
same question i think it was replaced by the brown one (?)
this really help my daugthers project this is the best
did you use any diodes on this project to convert AC to DC
hi, the fan can charge a samll battery??
hello i wand to ask you about your electronic circuit you have used here and what components
i made this but the problem is that the fans dont move as fast as shown in the vid y n how so..? please let me know the reason
Also, while that kid may be off to do some crazy job somewhere manipulating space-time and matter, the girl will surely get a head start on such an interesting and innovative industry.
Wat kind of glue did u use?
what you have done after it
แผงที่ติดอยู่เกี่ยวป่ะค่ะ
How do you know what the "coil pins" are?
is it waterproof cause i'm in England and it doesn't stop raining
how do u make the AC to DC receiver
Hello specallez, I'm really exciting to try this my own, but I have a very little knowledge about electronic.I have few question, 1. is it possible to charge my phone with 2000mah battery using this pico wind generator?how long it takes from empty to full charge? 2. Can I use dc brushless motor from my rc helicopter? what other components are needed to make it work? 3. I really want to learn some basic about electronic from you, is there any blog or web with DIY project you've already made?thank you
What ever happen to the white wire when all done you only use black and red ??
i use 12v fan instead of 24v fan. it doesnt work, anyone can explain why?
Sooo you dont need a rectifier this way?
Hi there! thanks so much for uploading, Love it! Whats the name of this box fan? thanks for reply in case you do ;)
If I wanted to charge my phone with this. Would I need AC or DC?
Some kind of watermill or hydroelectric charger. I live in a really wet area with streams and rivers and lakes everywhere.
WOW you are the best btw can i use a 12v fan?? please reply me
i keep thinking about electric cars having a wind turbine on the top to charge the battery as you drive? or am i just being stupid?
What is the maximum powe that you get from this generator?
@realgroovy24
7 жыл бұрын
It's all about the motor and the power of whatever is running it (be it a stirling engine or wind, water from river etc...) he shows the voltage later in the video, not sure about current.
Rectifier diode of any type can be use? Sorry my bad am not good on electrical stuffs but this is definitely want to try. Any link or where to buy?
@potchienezz
9 жыл бұрын
yeah any rectifier diode will do, but try to find schottky diode BAT85, i watched other vid and he used that diode.
When you rewire ,are you going to get the AC instead of DC right ? I messed up already 3 CPU one with DC 2 with 3 phase. phase ,
@particolor4558
10 жыл бұрын
I got Nuclear Power !!
what happen to the white cable??
@lullabylele4171
7 жыл бұрын
Bimo Pppsi you only need the + and - wire
@Kiyarose3999
6 жыл бұрын
Bimo Pppsi I’m wondering about the White wire as well, if it isn’t needed why was the 3 wires( including the White wire) re soldered?. Then after all 3 wires were soldiered I could only see the 2 negative and positive( black n Red). So what happened to the White wire?
Yeah I used four BAT85 diodes. shown at 4:03.
Like to work great job wonderful video keep up the good work good dude
Awesome tut btw.
Thanks for your help
amazing, thats really good
Does not need to use diodes to convert AC to DC
They are needed.
Very nice, thanks.
How many volts do you get, i made one and it just reaches 2mV
@Hi-lb8cq
8 жыл бұрын
look up micro vertical wind generator on ebay!...super cheap!...and u can upgrade the motor
Great Work! will 12 volt fan be good enough?
@jack32257
10 жыл бұрын
no as you saw it only gos upp to 6 volts if you want to power a fan with that windmill you will need the windmill to charge a 12 v batery and then from th e battery connect it to the fan and it will work but i recommend a bigger battery more than 12 volts ;D
would any one of those computer box fan work!?
@FixedByDoccom
8 жыл бұрын
+mohamad orabi yes...
It says on your website to build one to charge the ac to dc ut you don't use one in the video.
so 1-2 milliamps. how many volts.
@fabts4
8 жыл бұрын
+Jd Cunningham Same question, knowing the voltage is pretty important.
They are essential.
say i have 3 pc cooler can i combine all of them into a single connection so it will produce higher voltage when i place them in the wind?? hehe just curious
@swencordoba2156
9 жыл бұрын
yep u can but u have to connect them in series not paralel ;-)
Have you tried it?
พัดลมพลังน้ำความเย็น
Nice and simple Thanks
You start with three conductor but end up with two?
@johnwelempino7186
8 жыл бұрын
that was i thinking too
@fabts4
8 жыл бұрын
+Johnwel Empino I made some research and it's two-phase: there are two sets of two coils and one centre tap.
@johnwelempino7186
8 жыл бұрын
+fabts4 so it is working?
@fabts4
8 жыл бұрын
+Johnwel Empino Yes, I built a full wave bridge rectifier with a center tap (look up some schematics)
@johnwelempino7186
8 жыл бұрын
+fabts4 can you send me a picture of your work?
Good fun..did this with a fan from a hot air paint stripper..used chopped up compact discs glued onto the fan blades..worked well.....need to find computer fan and eat pot noodle....
I can't guarantee anything, but I'm open to ideas !
what is that red thing?voltmeter?
@FixedByDoccom
8 жыл бұрын
+trio engine yes
early in this video you unsoldiered all 3 wires but after you glued the new blades on the fan the white wire was no longer on the electric motor what happened to it
@OffgridManiac
10 жыл бұрын
Víctor Saorín ya in the video he soldiers on 3 wires a red a black and a white one but later in the video the white wire isnt soldered on any more was just wondering because i wanted to try and make one didnt wanna waste any time
@potchienezz
9 жыл бұрын
watch it again and pay attention on what he is saying, after he solder all three wires, he said, " try among the three wires which will give the higher output voltage and then eliminate the unnecessary wire" by unnecessary i think he meant that eliminate the connection that would only give lower output voltage. Víctor Saorín *****
@OffgridManiac
9 жыл бұрын
ya mine turned out so good i made one for my friend he charges his mp3 player with his wind mill
good work
Where is gone white cabble ?
@sahilgupta4639
10 жыл бұрын
yes im also finding that where it has been gone...?
nice camera - nice shoot (+)
can I use that to make charger in cell phone battery? How?
@loasky2477
5 жыл бұрын
jester paquera this is late as hell but with the energy have it transferred to a battery and then hook up that battery to your phone
What is the thing that he used to melt the wires to the cpu??
@mustafamoussa
9 жыл бұрын
A solder iron
@Engmir666
9 жыл бұрын
Mustafa Moussa Lmfao
Although I am a student f class of VIII, Even then I like it very much, I am learningto much. OWAIZ YUSUFI
It's good to know things
So cool! :)
I got a DC , CPU 12 v in DC . Now how can I Wire the circuit to make free energy.. Your is AC CPU.
Thanks!
It's just a bridge rectifier. Search google, there's millions of copies of this circuit on the interent