Save Money! Dont Replace your wood paneling! Just Paint it!

@savannahfranks7061

Жыл бұрын

do you have a after video of after you painted this?

I've found it is very important to wait 24 hours for the water based primer to cure. It appears to dry very fast and many painters coat over the primer too soon. The next layer of water based paint causes the primer to dissolve and creates unnecessary bleeding. Then of course said painter complains about the water born primer even though it is 100% user error.

@RyanAmatoPaintingEaston

3 жыл бұрын

Great tip! Yes we have learned that the hard way

We bought a house with gray panels out on the enclosed porch and want to paint it white..do i still need to use a bonding primer or will regular primer be fine?

I have a couple of questions. 1) Did you just use soap and water to clean the paneling? 2) From what I gathered from the video, you didn’t do a sanding at all, just the Sherwin Williams Extreme Primer, correct? Thanks, John Gallagher

@RyanAmatoPaintingEaston

3 жыл бұрын

Hi John, we wanted to test the adhesion primer so on this project we did NOT sand,but on a typical project we would very lightly scuff sand. (mainly 6ft and below) The homeowner cleaned this with a mild solution of soap and water (dawn) We would usually use Krud Cutter if there was smoking in the room or the kitchen, otherwise it would be painted

I have honey oak cabinets that I'm painting. I'm doing a white and I'm worried about tannins showing through? Do you think it's safe to just use SW Extreme Bond, or do I need to use a sealer first? EB first or a sealer first?

@RyanAmatoPaintingEaston

3 жыл бұрын

If your concerned with the tannins go to an oil based primer. We routinely use cover stain for this, great question

What top coat is compatible?

Do you need to sand if the paneling and cabinets are smooth with no rough textures?

@rogerdavenport7260

3 жыл бұрын

Yes

What’s the best method to paint knotty pine white? Also, would this work for kitchen cabinets that have a wood veneer front?

@RyanAmatoPaintingEaston

3 жыл бұрын

We were just talking about this yesterday. Each knot needs to be individually spot primed using shellac and then primed using the normal primer you would use, or simply shellac the entire surface however shellac is hard to find and expensive right now. Then continue with the same process.

Do you think this primer is better than the zinsser 123 for paneling/varnished trim/etc?

@RyanAmatoPaintingEaston

2 жыл бұрын

We do like the 1,2,3 as well. This seemed to adhere much better

I am glad I watched this through to the end... I will now get the Sherwin Williams Extreme Bond Primer instead of the Zinzer oil base primer.

@rogerdavenport7260

3 жыл бұрын

Disagree, For wood walls like this a shellac pigmented primer would adhear better, and get the nasty out. Extreme bond primer is good for this but cabinets for example use bin.

@RyanAmatoPaintingEaston

2 жыл бұрын

We dont disagree but the availability of shellac is tough right now, and the smell was not an option at this home

What kind of paint can I use on top of the primer

@donnacochrane1410

2 жыл бұрын

im hoping acrylic as i have done my bathroom cabinets

So after the extreme bond primer. Do you just paint over that ?

@RyanAmatoPaintingEaston

3 жыл бұрын

Yes the prep work like cleaning or sanding is done before the primer, whichever you choose to use, then your finish coats on top of primer. You could choose to sand lightly between coats

Do you need to sand if the paneling or cabinets are smooth?

@rogerdavenport7260

3 жыл бұрын

I would with a 220 to a 320 grittt

Do you need to do the primer if your wood paneling is real wood?

@RyanAmatoPaintingEaston

3 жыл бұрын

Great question, no not this adhesion primer but a good interior wood primer is needed. Unless your wood is sealed, then you would need the same adhesion primer

Wear nap length roller did you use?

@RyanAmatoPaintingEaston

3 жыл бұрын

3/8 " roller nap on this one.

My question is: the paneling that I have is raped with plastic, could I use the same material?

Can you use Swiffer wet wipes mopping to clean i

@RyanAmatoPaintingEaston

2 жыл бұрын

Yes you can, or a lesf blower if its in the garge

@myrnaloy4275

2 жыл бұрын

@@RyanAmatoPaintingEaston So it doesn't contain alcohol and can prime over it and it won't peel off? Thank you for answering, I was looking for a way other than the tsp

This time I will use Woodglut plans for this.

not sure I learned much here. The homeowner did the priming, you showed us a gallon of paint. Where exactly is the how to part?

I hope he plans on using either an eggshell finish or a semi gloss finish. You cannot clean flat paint and it looks so cheap

@RyanAmatoPaintingEaston

2 жыл бұрын

They make Washable flat paint now

Looks horrible. Best to slap some mud in the cracks, skim coat if necessary, sand and paint

You don’t.

A little lazy work....try using compound in the grooves to make it look like drywall...looks shitty just painting