Thanks for so much detail Pete!!!! For a super busy guy you sure help a lot of people!

I learned quite a few tricks from this vid, I got one question..on your pearl mix..did you use straight reducer with no intercoat clear / binder? Never thought about that

@robertmahaney7650

5 жыл бұрын

SprayWayCustoms I didn’t here about clear either I would have assumed yes

awesome skills and personality man. better than anything on discovery.

Just started watching about two months ago. Love your videos. I am 65 and learning to do sheetmetal fab and body work. Great tips. Thanks.

thank you pete, makes me feel a little more brave at the custom stuff, hell think I'll pick up a tank just to practice now :)

awsome tips Pete. thanks for all the helpful advise

hoping you guys have a great 4th of July, cant wait for ya'll to get back to work, John from Ga

I'm 30 seconds in and I want to take a sound bite of the speech. Build a meme build a GIF, build a reoccurring sound bite to apply in ALL sorts of situations for brothers who just cant get out of their own way. ~ "This is for those whose too timid to try. If it fucks up then it fucks up Try it again."~ Philosophy of life my man. I can tell I'm going to enjoy your approach. You got an instant subscriber...

Pete is there a chance you could do a video on the color blender in a panel repair situation. of course when and if you have time Thanks.

I laugh so hard when you make your "F" comments, I can so relate. Great video.

great tutorial on the flame job

you are the excellent and intelligent Texas painter of the motorcycle

HEY PETE WHAT COLORS WOULD YOU RECOMMEND FOR MY GHOST FLAMES THAT WOULD LOOK REALLY GOOD WITH A BURNT ORANGE?

Thanks Pete for the great video I learned a lot

Excellent video thank you sir for sharing your technique to the world!

my friend Pete ,have you ever used ( bag o flames ) ?

I might have to give that a try.

Thanks for the video....btw laughed my ass off at about 8:15 when the tape wouldn't let go..."the more flexafuc kingbility you need"... would make a great tshirt!!!!! LOL

is the paint gun your using a Binks model 7?

Hey Pete, what do you think of 2k spray cans.

Could you put the dry Pearl in Color-Blend,instead of slow reducer?

though the "ghost effect" wasn't' as Ghostly as once thought,, the job turned out really sweet!!! I really want to apply Ghost flames on my new Harley Freewheeler , I just need a place to do it.

don't know how much the dbc500 is but I use the shopline plus blender and never had a problem. use it many times a wekk.

Love it! Maybe one day I'll get back on a motorcycle.

Damn Pete. You are an artist. Makes me wanna ghost flame my Cadillac! im sharing this on Facebook. Killer shit buddy.... Like the Willy's flame job. Awesome

Pete, I can't thank you enough for all your hard work with sharing your knowledge and making these videos. Your constant sense of encouragement and to never give up on trying a tough job is amazing! You're a great teacher !

What's the shelf life of the pearl/urethane thinner mix?

Pete! Dying for Part 2!!! "CHOP! CHOP! Man!!!" ;-)

How much paint would i need to paint stretched saddlebags? Thanks in advance

Real down to earth guy !! No bullshit !!! Cheers man .

My friend Pete, do you happen to remember the color code and brand of both the red and blue pearl you used back when you did this? That color combo is just beautiful!!! Excellent job!

My friend Pete! I laughed so hard when the tape got stuck to your fingers and it wouldn't come off...you should use that on all your videos either at the start or the end! Very funny because it happens to me all the time..especially my shoes and sometimes I don't see it until I'm in a store or restaurant and at my age it's a sonofabitch to reach down and get it off! heeheeheehee

great stuff mate. you prove that with a little patience n a lot of graft, anything is possible man. Cheers for posting dude! where's weekly looser guy? Lol.

Thanks, Pete.

Another great video. Pete

WELL I"M BUILDING A OLD SCHOOL STYLE CHOPPER WITCH IS A 1971 IRONHEAD SPORTSTER AND THE BASE COAT IS A BURNT ORANGE PEARL METALIC AND I WAS JUST WONDERING IF I CAN DO MY GHOST FLAMES WITH COLOR SHIFTING PEARLS ?

For some reason I just want to call this guy on the phone and ask if his refrigerator is running, sure he'll love it

Nice video like always pete, i wash all the video, but theres one thing i did not understand, when u mix the drye pearl, did u just mix it pearl and reducer, or it was little be of base paint, pearl and reducer, ? if you can help me pete with this question or some body out there thanks in advance, god blesed.

@diyautoschool

4 жыл бұрын

Just reducer only.. Use Medium Temp Reducer to do this with so it will give it a good time period to otomize properly

@theadventuresofbellaandjos6435

4 жыл бұрын

@@diyautoschool thanks alot for ur prompt response pete.

Looking really nice Pete.

@robbiegwinn

8 жыл бұрын

been riding your bike yet this summer Ed? i got over 1500 miles just riding around here...no trips yet. bets off no accidents : )

@EdOfTheNorth

8 жыл бұрын

Robert Gwinn Hi Rob. To be truthful, I haven't even had one of my bikes fired up this summer yet. I built an auxiliary gas tank for the chopper and got that installed with the solo seat but me and Wendy have been busy cutting firewood for winter so just no time for riding yet. Pretty soon, I hope, but now I'm getting side tracked on building a sidecar for the chopper, so who knows. LOL. God bless and stay safe.

Hi Pete:I'm new to the pearl thing - well actually painting in general. I enjoy watching listening and learning. LOL Did I see that right - Just the dry flakes in reducer?? So how does it stick - just melt into the existing basecoat. I see you're about to cover it with the blender so I guess that holds it down for the next step? Just wondering.Makes me want to go out and get a piece of sheet metal and give it a try. Can't wait till the next installment to see the rest.ThanksSage

@diyautoschool

8 жыл бұрын

Something like that, you want to take the pearl powder and mix it with reducer, then spray your flames to the consistency that you like, once this is done then spray with the blender to protect them.. The pearl will go on dry because your moving fast and your gun is held back, so don't touch them or mess with them till you have applied the blender.. Practice on some sheet metal panels before jumping into a full motorcycle paint job..

@davesage9190

8 жыл бұрын

Thanks Pete: That explains it. What I find frustrating is the price of paint etc. That makes it very expensive to just "Play around" to gain some experience. I suppose there's no point in buying cheap supplies even to play with. Oh well I guess you just have to bite the bullet. I enjoy your videos - even the travel logs. Keep up the good work. Sage

@salimshaikh8897

4 жыл бұрын

salimshaikh8386@gmail.com

@outdoorsman357

10 ай бұрын

Thank you for your time making these diy videos. You have made my bike project a lot more fun to work on.

Thank you Pete....

Thinking out loud here, Why not cover the tank in friskit paper, draw flames, and then cut them out?

@LRSS2455

7 жыл бұрын

You run the risk of cutting into the paint below, depending on paint materials used, it can cause a paint lifting situation which will destroy all of your work. I have used frisket paper on top of the fine line tape and cut it out. It does save a lot of time doing it that way.

@jahidulgaffar4060

7 жыл бұрын

LuckyRosco yamha ka mehron klar

@EliMLMtakeover

6 жыл бұрын

you should pay attention!!!!!

I always wanted to learn how to paint and airbrish

gotta love it the best parts 7:09 8:09 13:41 your welcome

Well hurry up and post the next video...i cant wait...lol...great work pete

Good job

great video but on my flames i dont do the same on both sides as fires are all over the place and never the same

is that a binks model 7.

Hi mate are you the guy that does the debating the law channel ?

i hope you show us the finished items pete.

wow , ty

Pete, you got some mad skills man.

Getting ready to start practicing the flame game 😂😂

This is AWESOME.... Felt like I learned something and I wasn't being yelled at..... Ha Ha..... Great videos, I watch them all....

awesome!

Great vid Pete!

@alessandrodaniel8191

3 жыл бұрын

Pro trick: watch series on Kaldrostream. Me and my gf have been using it for watching a lot of movies during the lockdown.

@xanderbenton5774

3 жыл бұрын

@Alessandro Daniel Yea, been watching on KaldroStream for years myself =)

@chrisjude9933

3 жыл бұрын

@Alessandro Daniel Yup, I've been watching on kaldroStream for years myself =)

@alijahfranklin4473

3 жыл бұрын

@Alessandro Daniel Definitely, I've been using Kaldrostream for months myself :)

@eastoncolt8767

3 жыл бұрын

@Alessandro Daniel yup, been using kaldrostream for since december myself :)

I use a HoK cosmic show clear then more color and clear agsin. I'd have to use an Airbrush on that small rank. But that's skill

awesome videos as always wondering why we dont ever see Minnie the body shop girl . anyway keep it up love theno bull aproach you have my friend Pete

Lol! Best instructional vid ever.

hahahaha, so hilarious! very helpful tutorial!

Quedo perron ya solo falta que ladre.

Yea, we don't go crazy over the tape job, we go crazy when the doggone phone rings. LOL SHUUUUUUT UUUUUP !!!!! I'm laughing with ya, not atcha. NICE WORK DUDE.

Bro ur awsome man i love ur humor ur remibd me of my pops he told it like he saw it lol he was a. Just fuck it kibda guy. U rock bro

Nice1 Pete

Excellence!!

Tamica makes a special specific tape for curves

I have a portable phone hooked to my paints but funny seeing you stress over the office phone

"It's going to be so busy, you won't even know what the f@$k you're looking at" has me rolling. I wish I had you as a mentor when I was an apprentice

3M loves you Pete lol

Haha!! Fuckin love this guy! I get tired of the guys who are afraid to drop the F BOMB

cool

Best fuckin video on KZread. The fuckin phone...hahahaha

Haha, This guy keeps asking me if I understand what he’s saying like he’s going to get an answer! 😂

Great fncken video

Flames.......? That's unique

2nd class squid? What ship

Hey Pete... Is this the same stuff as the "Frisket Paper" you were talking about:: a.co/9mlw4eX

Man that's the funniest shit ever

Nice fucking utility blouse there petty officer 😎

2:38 LMAO

😎🍻

18:10 LOL! :-)

When the tape got stuck, my belly was hurting with laughter. I get annoyed over thing's like that.

......,or a Commercial Art Store for buying frisket. ........I hate the stuff.. Masking tape works better.

Best thing about scooters is there ain't a hundred square miles to prep and paint.

I can see you using some car technique in there. You the only one that use the paint gun instead of the airbrush. I only have paint gun actually.

hahahha

You're funny

I'M NOT SHOUTING!!!!

To any beginner watching this video...dont do anything he is doing.

OMG!!! So boring I fell asleep 3x trying to watch this.

Do u feel tuff when your swearing

Stop tell your live and work!!!!

Pete I feel sorry for you mate

"Ghost flames", very childish looking..

Who in their right mind, confirmed and signed off on the absolutely most horrendously ridiculous intro. That was horrible!

I had to stop watching about the first 30 seconds. This guys vocabulary smells worse than sewer.

maybe it's just me but every other word you speak is a curse word it would have been better if you just kept to what you are teaching.

@Super1nobody

6 жыл бұрын

fuck off. LOL hahaha. Just kidding sweety. He's kinda rough with the lanquage, but I like his video.