How to deal with starter yamaha vega zr, jupiter z, old vega r, mx that is totally dead or the sound of printing prints.
The steps we have to check are as follows:
1. Make sure there is a battery current plus after the contact is on the brown wire in the bend in the socket.
2. Make sure the big red wire has a direct plus battery current.
3. Make sure the blue wire and the white line are the paths for the starter button output to reach the bendik socket.
4. make sure there is a large red and white wire out of the bend to the starter dynamo.
5. make sure the battery is good at 12-15 volts DC.
Thank you so much to all #SUBSCRIBER#
Hopefully the knowledge is useful.
please #subscribe#
@IBOT MOTOR CHANNEL .
If you have any questions, please write them in the comments.
Tel/WA: 085863491419.
Thank you very much.