Enjoy this video? My videos have come a long way since this! Check out the custom subwoofer box I am currently building that uses a unique "STACK" style fabrication here: kzread.info/dash/bejne/gaBhqpJ-cqi1ZcY.html

@Funnygalsproductions

7 жыл бұрын

CarAudioFabrication beats the hammer and pliers

@BC3012

7 жыл бұрын

This is the first time I've stumbled across your videos, what a brilliant channel

@EvenTheDogAgrees

7 жыл бұрын

Just stumbled across this, looks like an interesting channel you created here. Will come in handy when I start redoing my car's interior.

@robertriley1713

4 жыл бұрын

Nice video. Do you do any work on Harley Davidson Road Glide?

I used to do this for a living. I would have killed to have access to videos like these back then. You have inspired me to dig my old amps out of the basement! Thank you!

@lmeza1983

7 жыл бұрын

Im not that old but yeah 20 years ago most of the trades or skills were cryptic as fuck, you needed another person to teach you (by working with them or paying) and not always they would help you. Today you can find a video about anything on youtube that is simply too much information, hope it remaings the same forever but not looking good.

@dotell3359

7 жыл бұрын

So did I......... Had a lot of fun....

Nice. That is all to be said. Far more informative in a lot of ways than many other tutorials in that you kept focused on a topic. Tangents can become confusing. You make this look easy when it really is not. Your symmetry is impeccable.

Thanks for the respect you show to the viewers, explaining and going straight forward to the point. 👍

I've compared other KZread car stereo shows to yours and your work and work area is the cleanest and professional looking. Your craftsmanship and attention to detail throughout the build is always top notch. Every cut is clean and sharp.

Hey your KZread Chanel is the best one on showing us how to fabricate and build our DIY car audio, I have never scene anybody else on KZread do this thanks man your a great part of the KZread community

Been watching your videos for a while now, and I like everything about what you're doing. You have a lot of good material, and you make it easy for people like me to pick up complex and intricate tasks that would have an otherwise steep learning curve. Thanks buddy, keep it up.

you give me so many ideas on car audio upgrades and I appreciate your knowledge and experience so thank you for giving us your time

This is VERY well done! Informative, without being boring. I'm designing a system for my car and my S.U.V. & this is very helpful. Thanx Mark you do GREAT work!

That was actually a much more simple process than i thought, and thnx for the great tips and video so that both audio and visual learners can get this stuff. Great work on it too!

You make something so complicated look easy. Wow. This is amazing.

Another awesome video Mark. Thanks for all you do to inspire us car audio junkies.

dude you an absolute legend i only stumbled across your vids the other day completely by accident but let me tell you i cant stop watching them i live in the uk and im about to start upgrading my mg zs saloon system i have just managed to get my hands on a pair of infinity perfect 6.5" components that im looking at puting on the rear deck so your custom adapter vid is going to be a lifesaver thanks for the excellent vids keep it up

Absolutely brilliant- really excited to find this channel and looking forward to the motivation i get from it!

What do I think? I think this is another BOSS video. Good to see you back at it man.

Awesome! The box looks great. In glad your back to making videos. . I check everyday and look forward to posting videos of my projects.

Great step by step quality videos. I appreciate your attention to detail. Great job

I'm very impressed. This box turned out really nice.

if you have the tools and the mind you make everything!! you are one of a kind!!! keep up the great work!!

Your work as usual is brilliant! Glad to see you posting videos again... Hope all is well

Well done , instructions were clear and to the point.

@CarAudioFabrication

9 жыл бұрын

Leonard Harrod Thank you for watching

Great video! very well done and extremely professional results! Keep up the great work.

Hey man, I've been watching and thoroughly enjoying your videos. I think it's great how you go into the little details and tricks. Also love the way your videos have improved since the first one with the kerfed subwoofer port. Keep up the great work :)

Excellent presentation, great voiceover. Sweet spot information etc. etc. etc. Fine job!!

Best tutorial I have seen by far!!! I will be highly utilizing your videos as I make my steps into the car audio fabrication world!

@CarAudioFabrication

10 жыл бұрын

Thank you! Keep slamming like buttons for me!

Thankyou for posting this video I do a fair bit of fabrication and the methods I have been taught to previously haven't always been easy to use unless the mold was squar or rectangular Thankyou car audio fabrication you're our only hope

Kickass stuff. That press you got there was the star of this project

Good stuff man. As always, so easy to understand and implement. Keep up the great work.

brilliant work as always love your work,thanks for the tips

Very Cool! It's soo Simple, but one of those "things" you'd just never think of... Thanks man!!

Awesome video deff encouraged me to get my two memphis m3 mojo 15's set up just got the 4kw amp last weekend! So now it's design time!

This is the first video of yours I've seen I like it. awesome work.

Very nice grill. Box was amazing. Easy to understand instructions.

awsome ive made sub boxes ,door pods ,door panels but never thought of this idea ive got so many ideas running through my head now

Looks great. Glad to see you back with us.

@CarAudioFabrication

10 жыл бұрын

Im glad to be back, thanks for the comment!

You are very talented. Congratulations and thanks for share all the information

Thank you for taking the time to make all of these videos.

@CarAudioFabrication

8 жыл бұрын

+rocbola Thanks for watching! Glad to hear it is helping you out! I do these videos on my spare time and out of pocket, I rely on fan funding to keep the videos going, if you are able to help I would love to have your support, if not, no big deal. Details here: goo.gl/3KQGNQ

Great job! I can see lots of skill and attention to detail goes into your work! Keep the videos coming!

@CarAudioFabrication

7 жыл бұрын

Thanks, this is actually one of my older videos, be sure to check out my latest!

These videos have helped me so much thanks for all the help keep up the good work

Very nice. I like the manner in which a very smart end product can be made with fairly readily available and non-specialised equipment.

I love it when things you make are better than store bought. Thumbs up.

box is looking awesome! im going to have to try the molded grill mesh in my future installs!

holy cow excellent thank you a plethora of ideas and your videos are very watchable with no extraneous noise and stupid music..thumbs up

I'm sorry. I'm just that guy who doesn't do a lot of subscribing or anything media social. I've been a woodworker and in the trades for 25 years as well as an avid car fan. I'm the dude who is looking back remembering the punch 45 75 and 150 as kings of the world. Been around for a while and now finally doing what I used to love and admire that others had. As a custom woodworker, fabricator, and doer instead of receiver, I want to give you full props. My customization will not match the absolute meticulous nature of yours but it will be custom because it will be the only one in existence. Just to end this and not be off track anymore I want to tell you that you are an absolute phenomenal fabricator. I think what else shines that in the only thing that it could it is your true desire to teach and love for what you do. Thank you

I love watching you videos! I'm no expert, wouldn't even say I'm a fabricator. I just love this industry and your videos can help many people like me to make great DIY projects! Hopefully soon I'll be doing a full system in my car! 2600w 0ga 2 amps ect.

wow! nice! thanks man! you are truly an artist!

Great video with the usual epic step by step teaching

Welcome back mark. Fantastic work. Will be following and sharing best that I can. Sorry to hear you had a few ups n downs last 6 weeks all the best for the future ..

@CarAudioFabrication

10 жыл бұрын

Thanks Adrian, that means a ton to me, i know you are always here supporting the videos and I appreciate that! Thanks man!

I have been doing custom work for over 15years, techniques and tutorials are very hard to find. I want to say that I consider your youtube page very use full even for a seasoned installer. I get great pleasure from your finishing techniques as its the finished job that determines a pro from a novice!

Great video - glad to see you are back!!!

that's awesome. I have always wondered how to do it. Thank you for the video.

This is awesome!!! Thanks for helping out with these lessons!!!

Holy cow this is epic Mark. So many steps to get here but well worth it. Cant wait to see some videos of other people using this tutorial

@CarAudioFabrication

10 жыл бұрын

Me too! Thanks for your support bro, congrats on getting married!

Thanx for sharing. I'm in the prosses of making sub boxes. this does help.

Very good . I enjoyed it. Also keep your head up, don't let anything get you down. I'm a street rod interior customizer about to relocate to Las Vegas.

Nice Work on explaining everything

Great video Mark, have a new shop in Jacksonville and this will be a huge help

Love this video. I'm an audio engineer, who also builds studio gear and microphones. I'm going to use this technique to make some nice grills for my custom ribbon microphones. This will work great for making custom pressed mic grilles. Your video has been bookmarked!

@CarAudioFabrication

9 жыл бұрын

Doug McGee Nice! Sounds like a fun project. Come back and comment and make a video when it is done so I can check it out!

@devendra.sanghavi

9 жыл бұрын

CarAudioFabrication Sir, What courses / education u covered for this works ??

Wow you do some beautiful work!!!

Your vids are awesome and very informative! Thanks for your hard work :)

Very impressive results!

This was the first of your videos that I watched. I look forward to clicking around your Channel more soon!

@CarAudioFabrication

7 жыл бұрын

+JC Cocker I'd appreciate that, thanks!

Absolutely beautiful

Beautiful work!

really useful DIY tutorial. It 's great to find this video. Thks, good works , thumb up !!!

@CarAudioFabrication

10 жыл бұрын

cring0101 Thank you for watching, hope you slammed the like button!

Very well done!Thank you for producing that video.

@CarAudioFabrication

7 жыл бұрын

+SYNYSTRDIABLO thank you, appreciate the comment, hope to see you more in the future!

Your stuff is amazing. Before I became a engineer I wanted to own my business doing shit like this. Love it!

Mark great job as usual. Looking good and love the work. The mesh template box is a great tool to use. Thanks for all the great videos hope all is well and glad your back to the great videos on youtube. Peace.

@CarAudioFabrication

10 жыл бұрын

Wait til you see what I have coming for you guys next. :) Thanks for watching!

Beautiful work man !! Looks factory but better.

Thanks! I don't have an interest in speakers, but it was fun seeing how it was done. Your video was nicely done, so thank you for your hard work. I know that it takes time and energy to do all this, so please know that it's appreciated!

Missed you man. Another great tutorial!

Great description and video. I'll have some of my own, soon, and I'll be sure to post and share!

I'm new 2 the fabricating world so I've been watching a tone of video's and I've found yours 2b top quality when it comes 2 information and video set up, editing and such. i think your a good man 2 follow. THANKYOU SO MUCH

@CarAudioFabrication

6 жыл бұрын

+GOOD-vs- EVIL thank you for watching

Awesome video helps alot in understanding how to mold mesh grill.

@CarAudioFabrication

10 жыл бұрын

Thank you for watching!

v erry well done.. you are a master from this tittle... my respect.. show more videos please...thnks for teaching us new things... grettings from michoacan mexico..

Great video, keep them coming.

AMAZING JOB!!! Keep doing it.

Beautiful work, very helpful video.

I like how you share info,to the old and new installers,Mary's won't share but those like you that share are bless.Antonio customs installer 28 years on the market.

Very nice video, thanks very much for sharing.

Very helpful! I am making a through body mesh exhaust port.

I enjoy your videos as I have worked with some real badass installers (Jon Webb, Jason Grade, Jaramy Kufman and others) I watched them do super involved builds but did not always retain the tips I was shown.. Great asset to the 12volt fab world thank you!

Another amazing video! Keep the coming!

your videos are well made. good job. very enjoyable.

this video was awesome def gave me some good ideas

its food for thought for a future project thanks

Very nice & well explained. Thank you.

Excellent work!

GLAD TO SEE YOU BACK!

@CarAudioFabrication

10 жыл бұрын

Im glad to be back, thank you for the support!

Thinking about this for vent guards in the dash. Good video

Very cool! Good job and thanks 4 the video.

i love this build

Daam Dude you have exceptional woodworking skills.

Amazing!!!! I cant wait to see more!

Clear, concise DIY video- Keep it up~!

@CarAudioFabrication

4 жыл бұрын

Glad it was helpful!

Cool video fabrication, liked the end product amazing

looks great man!

this is really cool. I'm glad I found you.

Excellent work and very informative video

Planning to use your grill mesh stretching technique for custom car grill. Thanks.

@stormshockin

7 жыл бұрын

likewise here! Were ya successful?