Good morning Mark. Without a doubt it is the best way to get an accurate wing. I have a biscuit tin with about fifty years of templates in it because you never know. Thanks again Mark.
@MarkRobinson555
5 ай бұрын
Hi Terry, thanks for the comment, its appreciated. Now I bet that is an interesting biscuit tin, would be great to have a look through, a really history of model making right there. As you say always worth saving the templates!
@dennismiller61315 ай бұрын
Thanks Mark. Always learn something every time I watch your videos. My favorite DIY RC channel.
@MarkRobinson555
5 ай бұрын
Thank you so much, really appreciate your kind comment
@NormanLedoyen5 ай бұрын
Great info Mark.
@MarkRobinson555
5 ай бұрын
Thanks Norm, appreciated
@robinboucherwonderfulflight5 ай бұрын
Great posting, as always. Could I suggest applying CA to the edge of the plywood template to roughen them to stand up to the sanding. Reapply as needed.
@MarkRobinson555
5 ай бұрын
Thanks for the comment, and appreciate the suggestion. CA will certainly make the edges harder, but the ply is much harder than the balsa and I only hand sand, also you can hear the sound change as it touches the ply.
@collinmccallum5 ай бұрын
good stuff!
@MarkRobinson555
5 ай бұрын
Glad you liked it! Thanks
@nigelcopestake36185 ай бұрын
Hi Mark nice video, have you done a video showing how to produce ribs for a tapered wings?
@MarkRobinson555
5 ай бұрын
Pleased you enjoyed it, this is a link for a video dealing with tapering wing which I hope you find useful 😀kzread.info/dash/bejne/qIGszaaHodi4qdI.htmlsi=NiYbnnszicmJYe6b
@nigelcopestake36185 ай бұрын
Really enjoyed the video, but I tend to notch out the templates for the spars. Then cut thru the sandwich of ribs with razor saw, then make any adjustments with a needle file. Until a offcut spar material fits snuggly 👍
@MarkRobinson555
5 ай бұрын
Thank you for the comment, pleased you enjoyed the video 😀
@marcobuonavita27575 ай бұрын
bello e interessante , il longherone di quale legno e' fatto ? grazie per la pazienza
@MarkRobinson555
5 ай бұрын
Grazie mille per il commento, felice che tu lo abbia trovato interessante. Il longherone è realizzato per 1/4 di balsa dura
@ivanplucinsky40145 ай бұрын
Hi Mark. Nice video. But what is the best proces to make identical ribs by small "peanut" planes? I dont think that threaded rod on such a small ribs is good idea. Threaded rods are not that small and than it could be not that rigid to sand it a so on...
@MarkRobinson555
5 ай бұрын
Thank you for the comment, appreciated. I have never tried making ribs that small, but I guess I would just try scaling it all down and using the same technique and see hoe it goes
Пікірлер: 20
Good morning Mark. Without a doubt it is the best way to get an accurate wing. I have a biscuit tin with about fifty years of templates in it because you never know. Thanks again Mark.
@MarkRobinson555
5 ай бұрын
Hi Terry, thanks for the comment, its appreciated. Now I bet that is an interesting biscuit tin, would be great to have a look through, a really history of model making right there. As you say always worth saving the templates!
Thanks Mark. Always learn something every time I watch your videos. My favorite DIY RC channel.
@MarkRobinson555
5 ай бұрын
Thank you so much, really appreciate your kind comment
Great info Mark.
@MarkRobinson555
5 ай бұрын
Thanks Norm, appreciated
Great posting, as always. Could I suggest applying CA to the edge of the plywood template to roughen them to stand up to the sanding. Reapply as needed.
@MarkRobinson555
5 ай бұрын
Thanks for the comment, and appreciate the suggestion. CA will certainly make the edges harder, but the ply is much harder than the balsa and I only hand sand, also you can hear the sound change as it touches the ply.
good stuff!
@MarkRobinson555
5 ай бұрын
Glad you liked it! Thanks
Hi Mark nice video, have you done a video showing how to produce ribs for a tapered wings?
@MarkRobinson555
5 ай бұрын
Pleased you enjoyed it, this is a link for a video dealing with tapering wing which I hope you find useful 😀kzread.info/dash/bejne/qIGszaaHodi4qdI.htmlsi=NiYbnnszicmJYe6b
Really enjoyed the video, but I tend to notch out the templates for the spars. Then cut thru the sandwich of ribs with razor saw, then make any adjustments with a needle file. Until a offcut spar material fits snuggly 👍
@MarkRobinson555
5 ай бұрын
Thank you for the comment, pleased you enjoyed the video 😀
bello e interessante , il longherone di quale legno e' fatto ? grazie per la pazienza
@MarkRobinson555
5 ай бұрын
Grazie mille per il commento, felice che tu lo abbia trovato interessante. Il longherone è realizzato per 1/4 di balsa dura
Hi Mark. Nice video. But what is the best proces to make identical ribs by small "peanut" planes? I dont think that threaded rod on such a small ribs is good idea. Threaded rods are not that small and than it could be not that rigid to sand it a so on...
@MarkRobinson555
5 ай бұрын
Thank you for the comment, appreciated. I have never tried making ribs that small, but I guess I would just try scaling it all down and using the same technique and see hoe it goes
what size threaded rod did you use?
@MarkRobinson555
5 ай бұрын
M2 rod 😀