I like the way u explained it as volume

@ReubsModifications

2 жыл бұрын

Thanks mate, it made sense to me so hopefully it did for everyone else

Sounds so good mate haha! Thanks for the vid!

@ReubsModifications

2 жыл бұрын

Thanks for the feedback mate glad you enjoyed it 🤙🏻

My td42 just woooshes through its 4” intake and back out the snorkel, even with a little 500rpm blip on the throttle 😂

@ReubsModifications

Жыл бұрын

Yeah bigger engine, bigger turbo. Sounds much better than a ZD30 for sure

Works on a 04 shogun/pajero 3.2 did 😃 . Shame it wouldent work while driving, sounds cool tho 👍

@ReubsModifications

2 жыл бұрын

Hahaha that’s awesome 🤙🏻

@y.morales6898

2 жыл бұрын

Hey! How u made that? I want to do it too in my 3.2

mine flutters too when if ride the clutch and turning it off, pretty stock besides the exhaust so i cant hear that anymore

@ReubsModifications

2 жыл бұрын

Yeah I got the same thing, works the same when you stall the engine when it’s loaded up 🤙🏻

My ZD30 Patrol flutters so much every time I let off the throttle. Installed a 3” straight pipe with a cat and very loud like a big truck lol. I was bit worried and looking around if this is bad for my car. Not sure if I should take it to a mechanic.

@ReubsModifications

8 ай бұрын

It can be normal for it to flutter depending on the mods that have been done to the engine. Cant do any harm having a qualified person check it out though

I opened the airbox on my 2018 nav work ute and it sounds the exact same😂

@tztezza

Ай бұрын

🤣🤣🤣

Does it have to close all the way to flutter and cut the engine out or can it be open just enough for the engine to stay on but decelerate the engine faster and dose without turning the engine off?

@ReubsModifications

Жыл бұрын

If you are using the key and cutting the engine it will close all the way but if you turn the key back before the revs drop too far then it wont turn off. If you're doing it manually in the engine bay then you have a bit more control of the valve but need someone to work the throttle.

I travel @40klm drop the clutch in 4th after a rev and I get the same flutter

@ReubsModifications

2 жыл бұрын

I’ll have to try that when mines running again

hello can I make this sound on 4jj1 engine?

@ReubsModifications

2 жыл бұрын

Hey mate I’m not too familiar with those engines but I’m pretty sure they have a similar butterfly so it’s possible 👍🏻

Mine "Blows Off" every gear shift or pedal lift-off. Huge FMIC and piping does that for ya. Your "Flutter" is called compressor stall. Excess boost pushing back against the compressor wheel and stalling it. The sound you get is the combination of your smooth, metal tube and being ver free flowing, sets up a tuned flutter. Mine with just a stock Safari snorkel just blows off. Your description of the throttle and swirl is close but not correct. So the back one is the EGR/Swirl butterfly to pull exhaust gases back into cyclinders via only 4 intake valves, the same butterfly closed even without the EGR flowing will induce a "Swirl" in the cyclinder charge but it's effects are pretty lame when whole charge is slammed into to the top of the piston at TDC. The throttle, the ECU will fully close it on engine-shutdown to try and stop the thing shaking but also as a safety for a run-away, kills air-flow, no more run-away diesel. What also happens on the Navara ONLY is the ECU can also partially close it to create a low pressure in the manifold to allow the EGR to flow in. If full boost pressure was in the plenum, it would flow out the EGR valve. See the three solenoids, the back one you have blocked would normally go to the other side of the throttle butterfly actuator and partially pull it closed. Yours in blocked and a T-piece connects both actuator chambers to the fun-stopper solenoid. Flutter is just a low frequency resonance.

@ReubsModifications

2 жыл бұрын

Thanks Ben, as always great information 👍🏻

@Cooperroso

2 жыл бұрын

Bro you sound like such a know it all show off like who asked

@bentheguru4986

2 жыл бұрын

@@Cooperroso Neither of us are your "Bro" kiddo, grow up and bugger-off.

@user-gj3hc5uc7s

2 жыл бұрын

Why can’t you do it with a top mount

@ReubsModifications

2 жыл бұрын

@@user-gj3hc5uc7s hey mate not sure where it said you can’t do it with a top mount, I think you might have misread bens comment about a huge FMIC and piping will do that. There’s nothing saying a top mount won’t flutter but there’s significantly less piping on top mounts then there is front mounts as there’s less distance from the turbo to intercooler. This means that there is less volume in a top mount intake system compared to a front mount, another point is top mounts are typically a lot smaller than front mounts due to space confinement’s so once again less intake volume. If you were running the same boost on either you’d have a better chance to flutter on a FMIC set up 👍🏻

What turbo are you running? Yd25 turbo?

@ReubsModifications

Жыл бұрын

Zd30 Patrol Turbo

Hi, I know, my qyestion is not about the Flutter,,,🙂 I have a question about, what size of tyres you have and about the rims, what ET and J they have... Thank You for any answer 👍🏼😎

@ReubsModifications

9 ай бұрын

The tyres are a 285/75/16 and offset is -2 and the rims are 16x8 👍🏼

@loganwolverine9294

9 ай бұрын

@@ReubsModifications Thank You for the answer,, 👍🏼😎💯

@ReubsModifications

9 ай бұрын

@@loganwolverine9294 no problem 👍🏻

I’ve managed to stutter a box truck by revving and keybanging. Try it.

@tztezza

Ай бұрын

lol a key bang on a push to start? 🤷‍♂️🤣

What intercooler do you have

@ReubsModifications

2 жыл бұрын

It’s a HPD series 2 👍🏻

i’ve got a stock zd30 nav with a snork, it makes a swoosh noise when ya try this trick hahah nothing too special 😅

@ReubsModifications

2 жыл бұрын

Still does the trick 🤙🏻

This well where off the turbo baring ,u basically deleting the blo off valve and the gas gets back inside the turbo ...

@ReubsModifications

2 жыл бұрын

The ZD30 doesnt have a blow off valve, they use a wastegate on the turbo to vent exhaust pressure away from the turbine blades.

@ll-nm8he

2 жыл бұрын

Can u mack a video and show us how to delete the Westgate on turbo diesel

@strider5119

5 ай бұрын

won't do anything to the turbo, and you shouldn't delete a wastegate.

Your little ‘trick’ is the fastest way to root your bearings and gaskets lol

@ReubsModifications

2 жыл бұрын

I wouldn’t be surprised, my turbo was second hand and cost me $100 and I plan to upgrade soon anyway

Compressor surge is not good one turbine spinning and comp wheel trying to spin the oposite way thats how shafts snap

This is an extra way to blow up your zd30 haha 💣

@ReubsModifications

Жыл бұрын

They blow up regardless 😂

All turbo flutter not good for them but

@ReubsModifications

2 жыл бұрын

Yeah hard to decide wether it’s worth it or not 😂

All it does is weaken the fins on the compressor wheel.. pure wank value but, great for the mechanics and accessory sellers!

@ReubsModifications

2 жыл бұрын

I got my turbo for $100 so I don’t think this will do it any harm 😂

Oh, so this is keybanging ur car?

@ReubsModifications

2 жыл бұрын

Haha I guess so 🤷🏻‍♂️

This is really stupid actually. Your gunna need a new engine soon.

@DriftNick

4 ай бұрын

The only stupid thing is your comment if you actually think this will damage the engine.

What a waste of time watching something