*Edit with lessons learnt* Do a front mount intercooler paired with this! The echo through the intercooler piping and out of the intake is EXACTLY the noise you're after. Maximum flutter 😂, video will be coming out covering this soon

@datsmyfault4152

4 жыл бұрын

Lets gooooo

@crazywacky

3 жыл бұрын

Dude that mod only dous tutututuu when you have an open airfilter. With normal closed airbox the effect is close to nothing. Try it and take a small drive with you airbox open.

@BuiltByBlake

3 жыл бұрын

@@crazywacky the car has a K&N cold air intake fitted mate 👍🏼 it really was just the intercooler holding the noise back, if you watch my front mount intercooler install video you can hear the comparison. It's waaaay louder 🤘🏼

@simonalma6796

3 жыл бұрын

Cool car

@brooksbehounek935

3 жыл бұрын

I see you have a subie with a blow off value. I have an 02 Subie Wrx wagon. My friend told me not to put a blowoff value on it because subies don’t like them. Is this true?

I thought we could hire you for 10 dollars to make the sound while sitting on the hood of our car

@SimplCode

3 жыл бұрын

I’m dead 😂

@jacobgreen8249

3 жыл бұрын

⚰️ here's your trophy 🏆 🤣🤣

@BuiltByBlake

2 жыл бұрын

Not normally how I'd sell my body...but hey, I'll try anything once 🤘🏼😏

@lucienaugustin5805

2 жыл бұрын

😆😆

@QuantumKingg

2 жыл бұрын

Bruh 😂😂

Use me as “I didn hear sh!t” button

@wadez1000

3 жыл бұрын

Maybe your headphones are bad? or hearing D:

@escalanteson7454

3 жыл бұрын

It was a baby stutu if you add more psi and pipes it changes it drastically

The air going back through the turbo doesn’t hurt it, sure it increases wear a little but it doesn’t drastically damage it, but the poor air gets chopped up but the sacrifice is worth that sweet sweet stututututu

@BuiltByBlake

3 жыл бұрын

It's an argument that'll go down for years to come. Haha, but I agree, sacrifice all the air!!!

@cadenpatel6334

3 жыл бұрын

what brand is his blocker...is it just a block off plate? cuz i have one but makes no sound like that

@sharpshot5408

3 жыл бұрын

There is a reason why blow off vales exist. And the point of removing them is in race conditions when you dont want BO valve because it will dump all the boost and turbo flutter is not a problem because they will change the turbo after the race

@bromodz2309

3 жыл бұрын

A small price to pay for salvation

@inniyewtesfaw2003

3 жыл бұрын

@@sharpshot5408 backflow damaging turbines is only an issue with journal bearings, ball bearings will take it just fine

Cant wait to put this on my bicycle

Can’t wait to install this on my NA H6

@Jamppa.

4 жыл бұрын

Hol up

@minko2533

4 жыл бұрын

Yeah I’ll put it in between fuel rail and the steering wheel and make 450 megawatts

@unfknknown9678

4 жыл бұрын

@@minko2533 how's it working for you

@minko2533

4 жыл бұрын

unfknknown made -10 HP

@minko2533

4 жыл бұрын

@@unfknknown9678 that good m8

0:00 turkeys when it’s November

@dylanfurlong3519

3 жыл бұрын

it’s november

@kian_hc

3 жыл бұрын

0:07

You can do it with a BOV. It just had to be on the atmosphere side. So you’ll need new intercooling pipes with a BOV spot. Then block the old Diverter/BOV with that plate. With metal inter cooling with a straight intake that’s not to long. Plus a turbo with less fins/ bigger find it will dose better

Love the honesty bro, not everyone explains that it can be harmful to your ride

That buaa sttutututu in the start was epic bro😂😂😂🥰🥰

Intake, tubing, intercooler, and turbo dimensions and designs influence this a ton too, move towards the designs of those 2js and rb26s and you'll probably get it, especially with a big single turbo with a very light filter like a mesh

0:27 imagine walking out into your front porch for your morning coffee and seeing this

@BuiltByBlake

3 жыл бұрын

Yeah I'm pretty confident my neighbors know I'm a complete fruit loop by now 🥲

dude i can’t wait to instal the mod he had when he started the video that shit fiiiire

The reason is probably because you have an 11 blade turbine, you want less turbine blades so you have wider gaps for it to catch and chop the air, something like a 6 blade will be best :)

The sheer enthusiasm at the start of this video makes this world a better place and brings me great joy 🤣🤣🤣❤❤❤

ok so um if i got a honda accord with a 2.0 turbo will it work or nah

soo helpfull bro, thankss from spain‼️‼️

Hahahahaha bossman. The start of this made me laugh 🔥

0:01 - 0:08 is my ringtone now. Absolutely insane turbo flutter ever!

Hey man, what size gas struts are you using for your bonnet

That intro was golden👌

Can you see your turbo or is it have lot of intake piping. The closer you get to seeing your cold side impeller the louder it gets.

That first clip was the pinnacle of mankind

How much should i spend for a turbo for an in line 4 2.0

Them Turkey call in the beginning tho😂😂

@BuiltByBlake

4 жыл бұрын

🦃🦃

This guy deserves more subs

Also a metal intake pipe makes it way better. Plastic seems to dull it down.

Just stiffen up the bov or diverter valve spring??

The gobble turbo noise made me subscribe instantly 😂

You could, instead of removing the bov and buying a blocking plate, just remove the vacuum line and plug it. Same outcome, cheaper, faster to do, and can easily go back to bov noises.

@marcusprothero8349

Жыл бұрын

what do you mean??

@strider5119

5 ай бұрын

You can do that, however the BOV can still open without the vacuum line. Depends entirely on the spring and how much boost you're running. Stock psi, block the vacuum line. Anything over stock, block off the bov entirely.

@strider5119

5 ай бұрын

@@marcusprothero8349 there's a vacuum line that runs to your bov. If you block it, the bov wont open at whatever psi its set to and you'll get flutter. If you're running stock boost or close enough to it, it should work fine. The BOV can still be forced open under high pressure, but you'd likely need to increase boost for that to happen

If you don’t want the hassle of having those tubes hanging around then just put the blowoff valve back on... doesn’t matter it will still make the same sound

The intro was the best intro ever 😂

I have dv+, new turbo, full system exhaust fsw, air intake ramair open box, still small flutter i can barelyhear it!! Any idea?

The intro 😂😂💀

a larger intercooler increases the sound aswell. more volume of air. at 18 psi and a cnt intercooler on my 05 legacy gt my gfb response was twice as loud as my 08 obxt on stock boost and stock intercooler. i also have a larger intercooler on my dsm and am running no bov on that and i can confirm that the larger inter cooler increases the dose sound :)

@proseiben3358

4 жыл бұрын

The larger intercooler means that you cool the air faster. Doesnt increase the volume of air taken into the engine.

@DriftNick

2 жыл бұрын

@@proseiben3358 It increases the volume of air between the throttle plate and the turbo.

@clausmadsen1257

2 жыл бұрын

It also gives more turbo lag.

@SR-yt2bc

2 жыл бұрын

ur 05 legacy sucks my boy. anyone owning a subaru or rx8 that thinks its fast is fucking hilarious. your comedians

@acetckfan3279

2 жыл бұрын

No bov on an already unreliable car man you crazy

Anti-lag and the right blow off with lots of pressure can also do it

Accidentally clicked on the video... That intro kept me here 👍🤣😂🤣😂

seen the legacy air out, instant sub

The flutter is only bad if you have an older generation of turbo or if it’s happening while on throttle. Other than that it isn’t bad because it just quickly decelerates it compared to the quick acceleration it usually would deal with.

Where can I order the one in the intro

You actually need upgraded pipes, fmi and more boost to unlock stutututu mode

@dylankitchener6421

2 жыл бұрын

What kinda pipes?

@Brabant076

2 жыл бұрын

@@dylankitchener6421 Upgraded pipes.

@madarx_c.e9399

Жыл бұрын

@@dylankitchener6421 Or stainless steel pipes so the sound resonates with a more choppy dose

I need some help. My friend has got a 2008 SEAT Ibiza. It’s got no modifications really done to it, but he really wants his car to sound exactly like that. How can I be done without spending a crazy about of money.

Works for an xbox right?

Can I do this on a GM 2.0 LTG Turbo Motor

You should engineer something like the electronic downpipe exhausts you can get, then you could flip a switch when you want to drive with the stututut and then flip it again to unlock the BOV

open your gfb blow off valve to full atmosphere, then block the blow off valve with the black cap

That bwaaat tutututu had me dying 😂

Holy shit!! Had me dying at the beginning🤣🤣🤣

Is it fully straight piped tho

Wonder if anyone has made something similar that allows us to select between fully blocking the hole and opening it when we don't want the noise anymore via some kind of iris or a butterfly valve :o

Starting 😂😂😂😂 super funny 😂

A cobb stage 2 EBS with a protune will make your car do this without blocking your recirc valve lol. Mine does it loudest in 3rd gear when I'm going up hill and I step on the gas to build up pressure and then let off, it's super loud.

@jrhcustom1450

3 жыл бұрын

EBS?

@townesjones8166

3 жыл бұрын

@@jrhcustom1450 maybe electronic boost solenoid

Can u do this to a bpv (2020 Veloster n )

This guy is seriously underrated

Where did you get that cap bro?

Where do I buy the part?

Can’t wait to put this in my bicycle

THE INTROOO 😭😭😂😂

It actually dosent do any damage when it bounces off the turbo wheel

How does he only have 900 subs boys let’s help him out

@BuiltByBlake

3 жыл бұрын

hahaha, hell yeah, what this guy said ^^

i thought the intro was the 10 dollar stututu sound that you make yourself while driving

Cant wait to install this on my mazda 2 turbo😂

Man literally becomes a turkey in that intro

LOL THE INTRO SENT ME 💀💀🤣🤣🤣

Can wait to install this on my Volkswagen Golf 😂😂

Hahaha,New Chanel for me and intro is top🤣👌

Background music name please i am literally finding this song 2 3 months

can you make a diesel turbo do that

You need more boost for it to sound what your thinking about

With your gfb you can get the same sound only moving the spring

How do you make the wooooosh sound tho

I like this guy because his intro is crazy

Man i was expecting some blown hoses or something

Is it bad for the turbo?

Sounds like it's breaking down whenever it (flutters)

Which car is that i cant see the logo infront of on the bumper??

@karinehara8611

4 жыл бұрын

i think it's a subaru legacy

@BuiltByBlake

4 жыл бұрын

Subaru legacy (liberty for us upside down folks in Aus) wagon, the badges on my are just a JDM variant of the legacy badge

Where you get that "mettafold" 🤣 you been threw the metaverse!?

The man sounds better than the turbo itself

the first song?

hello ,but for diesel engines ,I have w204 220 cdi ,

what car is this

Where'd you get the head lights

@BuiltByBlake

3 жыл бұрын

They are custom made mate, if you scroll back down my channel I did a little series on how to make them. They are some of the first videos I made, so it's a little cringy to watch 😅 but you'll get the idea 🤘🏼

Subscribed because *that intro*

this is literally the first car imma buy

That last stustustu sounded like a turkey 😂

Will this make a diesel engine run away?

My bypass valve makes the noise without blocking it off haha

@derpblock

3 жыл бұрын

Same for me

@no_sleep_yx3

3 жыл бұрын

@Andy Garcia my gc8! Thanks man

@BlackWlng98

3 жыл бұрын

What bypass valve are you using?

Saw the intro of you making the fake car noises and pressed the like button right away😂😂😂😂

Where did u get your airbag kit from mate? And how much was it if u remember? Cheers

@BuiltByBlake

2 жыл бұрын

Hey mate, back when I did it I had to do all the ground work myself as no one offered a kit. The final product was d2 struts controlled by airlift system. These days I believe bagriders offer a kit for the liberty/legacy (and honestly that's what I'd be going with, I tried the cheap shit first time round and it was exactly that - cheap. shit. 😅) Ended up buying the reputable stuff and gave them hell and never had a single issue.

@southernsupplies

2 жыл бұрын

@@BuiltByBlake awesome mate thanks heaps it looks killer 👍

subigang💯💙

Can’t wait to do it to my duramax

That intro lmfaooo

this was the top video when i searched up "how to make your car go stu stu stu" and i didnt hear stu stu stu

lol try this in a all stock motor, intake fmic, echaust and 18 psi of boost evo 8 it sounds like what you wanted your to sound like lol

the intro tho 😂😂😂

That intro was hilarious

Subcribed purely because of the turbo noise he made at the start 😂😂😂😂

Lmfao mate, get that sound effect on Instagram reels👌🏼

After that intro you gained a sub

You need to take the intake off and put a dose pipe on the end of the turbo