Enjoyed your video,very informative ❤️👍

I make box calls,and your pot call sounds pretty good.

@danr.graham9331

5 жыл бұрын

I've made a few box calls, also. I drill some large holes in the bottom of the box. Seems to make it louder.

That call sounds good Im looking to make my own calls. I hunt a area were lots of people hunt and Id love to make a copper call because Im sure that no one around here has one. How thick does the copper need to be to be a effective call?

what kind of striker do i need for copper slate calls

I got a wood call and I want to put a glass on it so what kind of glue do I need to use?

No sound board wtf

do they have a website?

what is the best way to condition a copper pot call ?

we're do you find the copper or aluminum

do you not use a sounboard?

how do i get calls from this man ? I need

What’s the router called when you hollowed out the center that quick? Usually I see people hand carving it out on a lathe?

@sebbaba9964

9 ай бұрын

Forstner bit on a drill press

@ballengeebowhunting9572

3 ай бұрын

@@sebbaba9964how do you know how deep to go when you use the Forster bit?And what size is it?

do you hunt?

What was the tool used to cut out the middle

@sebbaba9964

9 ай бұрын

Forstner bit on a drill press

What are the big bits you use to bore out the majority of the call called

@dustinsmith1076

9 жыл бұрын

I was wondering the same thing.

@OldJesusFreak1958

9 жыл бұрын

They are called "forstner" bits. Available online or any woodworking outlet.

@georgecesarini7748

6 жыл бұрын

You can find them online or at most plumbing supply houses or building supply stores. Even stores like Home Depot and Lowe’s should have them. They go by Forstner bits or most supply house counter employees or hardware store workers will know them by “ Boring Bits”. Obviously that’s boring as in Boring a hole not like my comment is long and boring. Lol.

So you don't use a sound board on the copper calls you make?

Don't you use a tone bored inside ..

I cringed when he used that roughing gouge on that call

no sound board?

@stevenrose5831

10 жыл бұрын

I dont think theres sounds boards with alum or copper calls. At least you dont need one. Im a call maker (just a hobby right now) but I put a sound board on a alum call and it sounded like crap. I forget the setup. I know you can run glass over alum, I also think you can stack the two as well. That means no gap between the SB and calling surface. Just need to bring up the ped

@huntercyrus984

8 жыл бұрын

+Steven Rose what should I use for a slate call sound bored I'm wanting to make a call or do I need one

@JunkBeGoneNY

8 жыл бұрын

+Hunter Cyrus Hey man its Steve. Slate calls are the most forgiving out of all the surfaces. Its the easiest to play, easiest to make. Copper and plain alum in my eyes are the hardest to make. Sound boards can very in all calls, they all will alter the sound. Glass is the most widely used. Theres single strength and double strength. Both work. You need to find the best space between the two surfaces to get the right pitch and roll over. Theres so many things that will change the sound. Its something you need to work with. But glass i would say is best for slate. It will give you a higher pitch, more crisp sound. You can use plexiglass, wood, slate, alum, anything for a SB. If you want to find me on facebook i can help you. My email is rusher75@yahoo.com. That should help you find me.

@huntercyrus984

8 жыл бұрын

Hey thanks man

@mathewcarden4474

Ай бұрын

I run a slate sound board under a copper surface. I've got one I'm dying to try this season it's a slate surface with copper sound board sounds amazing

this guy hosts a show on friction calls and cant even use it.

Safety is a way of life..... Should always wear a face shield when using a lathe

Says how to make a slate call not copper