Great stuff man! The attention to detail is awesome!

im absolutely impressed! definitely gonna try it out

I know this video is a few years old but question for you... why not use Rubber Cement/Glue vs Super Glue???

What's is the tool called to cut the rubber

Should wear nitrile gloves to prevent natural oil on your fingers from contaminating the rubber before you glue it, they wont last long

It looks amazing, but manually cut out a total of 64 letters and all applying them one by one is a bit too rich for me. I'd happily slap some money on the counter for this

How do you make the template pleeease help :(

Hi, may i know what size did you use on Photoshop? Using pixels or mm please help

@michaelnjio

3 жыл бұрын

I think he used a ratio then printed according to sticker paper size. If you noticed they turned out bigger than expected.

Thank you

Can't seem to find that white rubber... did you special order from somewhere ? Thanks for the info and great looking job. The last tire letters I ordered from China didnn't last. They cracked in a few weeks. I'm thinking that using the right material might make them last a wee bit longer. Gotta love that race car look.

dude !!!! amazing... well done!!

CRAZY ...GOOD JOB!

Where you buy your tools at ?

That's awesome, but what's the durability, I mean you no once super glue gets wett for so long it dries up,so I'm sure the letters will fall off,especially with a pressure washer

do you think it would work with EVA foam sheets??? Eva foam comes in a ton of different colors and can be laser cut...

@imtherain

4 жыл бұрын

good ideas, I'm gonna try it see if it hold out.

Did the sharpie hold up on the sides? I just ordered 12x12 sheets on amazon!! Need to work on the template

@tengotengos9000

6 жыл бұрын

yes! it gets deep in the rubber and you can't take it off even with rubbing alcohol

Most useful video i found for tyre leterring 🙂🙂🤌🏻🤌🏻 thank you so so so much ❤️❤️

Can you teach how to measure the size and convert into AI

How did u design the letters to bend perfectly around tire on illustrator

@tengotengos9000

4 жыл бұрын

trial and error honestly

B4 u throw a bad comments u need to try it first yourself I have the same thing same materials everything I never have a problem on mine can’t complain just $15 for everything only thing u need is cutter,tape,rubber sheets,superglue when cutting the letters u need to have patience and is not coming off easily I try to put one letter and I try to take them off I can’t even remove it and plus your talking also the tires of course tire is always get dirty so that is normal that’s why people always put a tire shine if u want to see my channel what’s it thanks to this guy tengotengobmw

Wow very very nice video! Thank you... Now you get new subscriber

@tengotengos9000

6 жыл бұрын

Thank you!

Dude thanks soooo much!!

Krazy glue won't work for long it drys hard and will Crack off ?

bloody awesome

great stuff bro can u share link for tool kit u r using ?

Is there a yellow runner sheet i can buy? I only see white and black

Hi there great video.. very help full. Just wondering were did you get the stencil from if you can give the link please and thank you

yes, don't forget about the banana. Most import tool of this mod. LOL

This is amazing thank you

Nice job

Where do you get the rubber sheet from? And do you have yellow rubber sheet?

what is the font of the text called

@tengotengos9000

4 жыл бұрын

Frutiger LT Com 95 UltraBlack

Hi bro what is the name or brand of the rubber sheet? Where to buy it?

wow so brilliant , what size the rubber ? did you use thanks for answering my question keep it up bro

how many sheets are needed to do all 4 tires?

@tengotengos9000

6 жыл бұрын

Great question. You could calculate that using your design in Adobe Illustrator. You could also use software called Texture Packer to arrange your letters as efficiently as possible on each sheet to reduce waste. It all depends on what you're trying to write.

@DrewPeacock

6 жыл бұрын

tengotengo's alright sweet, did you need more then 3 sheets tho ?

@tengotengos9000

6 жыл бұрын

I bought a pack of 3 sheets and I only did it for rear tires, 2 words each, 4 total and I think I used about 2 sheets. But I didn't use them very efficiently.

@DrewPeacock

6 жыл бұрын

tengotengo's sweet thank you

where can i get the material used for cutting the letters in colours?

That's awesome! How many sheets should I buy? $15 will include 3 sheets but not sure how many letters will come out of them if I cut the letters at 1 inch.

@mattjohnson2988

2 жыл бұрын

Where do you get the sheets

Darn... thanks the rubber gasket is sold out...will a silicone rubber sheet work?

I've done this with actual rubber & the strongest glue out there but, the lettering fell off after 2 weeks. Letters were cutting off or flying off from the tire flexing on small potholes & harsh road conditions. It's great for a day or two but not permanent.

@jeffreymac4915

6 жыл бұрын

Jovanny Sanchez what glue did you use? I’m going to use contact cement. Did the glue you use leave a nasty residue on your tire?

@stratussx

6 жыл бұрын

Jeffrey Mac yes it did. I recently bought a legit tire lettering pair & it did the same thing. Either I suck at installing them or my fenders are destroying them.

@stickfigure9662

5 жыл бұрын

You can buy fleximent glue separate on the web. Thats the glue that all the expensive kits come with.

@PetePools

Жыл бұрын

wouldn't regular patch tire cement work? the key is gluing to clean rubber. tire guys buff the rubber clean for patch to stick

What is the program for the print out on the Adobe flash? To get the print out?

great video, probably going to save us $100 for this DIY :), mind if I ask how's the stickers holding up and how do you keep them clean?

@tengotengos9000

7 жыл бұрын

They hold up pretty well, rubber gets a little chapped over time, and you should also use a rubber glue instead of super glue. Cleaning with a rubbing alcohol is super cheap and easy solution. I haven't figured out how to prevent them from chapping. Probably gonna try soaking it with some oil or gasoline to make them softer and prevent from drying

@jcorona7731

6 жыл бұрын

tengotengo's 1st off great video, 2nd where can i buy the rubber at?

@Divorceization

6 жыл бұрын

tengotengo's 5

@123456787605

6 жыл бұрын

tengotengo's I used super glue but it says it bonds to rubber do u think I’m fine?

@SoggyBiscuits1000

5 жыл бұрын

@@tengotengos9000 the super glue will dry them out too, plus super glue drys hard with no flex. good video though

Do you think flex tape will work?? It’s rubberized tape? 🤷🏻‍♂️

@TengizAdamashvili

3 жыл бұрын

most likely no

nice...where can i buy that rubber sheet?

Where do I purchase the rubber to cut the letters out of

hermano gracias por compartir lo que sabes , ya hice los míos para el honda y me gustó mucho como quedaron. cuanto tiempo duran?

@tengotengos9000

6 жыл бұрын

You are absolutely welcome! I enjoy making videos and comments like that motivate me even more. They can last maybe 6 months if maintained properly and if you use rubber glue instead of super glue. And check them once in a while and add glue if necessary if it comes off a little

@leoaguirre1502

6 жыл бұрын

+tengotengo's hermano gracias por responder, por ahora hice unas letras pequeñas para el civic pero después voy a hacer unas mas grandes, como las de tú BMW. Saludos desde la Heroica Ciudad Juárez

@parisibarra4091

6 жыл бұрын

Oye, que material compraste y dónde Leo Aguirre???

@leoaguirre1502

6 жыл бұрын

+Paris Ibarra anduve buscando un material más resistente y no encontré y pues compré foami y lo pegué con super glue que es como la kola loka pero mas barato, ya tienen casi dos meses y aún están como nuevos

@parisibarra4091

6 жыл бұрын

Y cómo lavas el foami, se mantiene blanco?

bhaiya jee rubber kaha se purchase kiya tha

How did you get the right angel for your tires?? And what size tires are you riding??

@tengotengos9000

6 жыл бұрын

they were stock m235i michelin tires

Can I get a cricket machine and make the stickers?

I tried to use white Silicon blankent, but it didn't worked so good, the letters craked after somedays.

@vinacao1

5 жыл бұрын

Ruy Joy try to use rubber

When you bought the rubber sheets, was the color a true white or an off white that is almost like a light tan color?

@TengizAdamashvili

6 жыл бұрын

yes, it wasn't quite white

@jeffreymac4915

6 жыл бұрын

I think it was off white. His didn’t look completely white. How did your project go? Did you go through with it? If you did, what glue did you use? I’m thinking of using contact cement

That a good idea

Hi what kind of rubber and where did u buy it please let me know thanks

@tengotengos9000

6 жыл бұрын

go on ebay and type "white rubber sheets gasket" and you should see it also there was a suggestion to try foam sheets as well

@pinoyhandymanofalltrades

6 жыл бұрын

Thanks buddy I’ve been looking this kind of rubber for a long time I know it’s not the same as what they use at tire graphics or at tire stickers they are way to expensive just to buy this tire letter but the one u make very impressive thanks to your video good job my friend happy new year

What do i touch in the illustrator to curve the letters ? And what is the font because it is not coming out for me. I looked up the one in your description but it docent come up. please help :(

@tengotengos9000

6 жыл бұрын

You need to download the font from the internet. Just type it's name in Google kzread.info/dash/bejne/doSDy6igc6e4Zs4.html here's a great tutorial on how to type text on a curve

The rubber you're using for this, I keep finding white 'nitrile' rubber but it always seem more off-white than just pure white. How white is it actually?

@TengizAdamashvili

3 жыл бұрын

yeah, it's not perfectly white, it's yellow-ish, but on black tires it'll look white alright

@sandhuns1241

Жыл бұрын

Where did you find rubber sheet?

Brilliant I knew there would be a alternative to purchase these is seriously overpriced An bullshit it’s bad business too, it’s fair enough to make a product An one that’s great separating from the rest - also to add quality build, but if your creating something that makes you have to sell it for to much then it’s not going to sell an just get a bad name for it then the developers will end up seeing people like is in these videos.....nobody pays nearly $200 for some rubber letters if you do your an idiot with to much money to spend not when this is how the stuffs made

@TengizAdamashvili

6 жыл бұрын

Amen.

@berengerchristy6256

6 жыл бұрын

sick run on sentence and spelling and grammatical errors

@stratussx

6 жыл бұрын

I used to think this but I tried to make my own & was unsuccessful. The tire lettering is expensive but there's a lot of things that go in the process. Cuts are precise, protective film over the letters, specially made glue & 100% guarantee that it works. You get what you paid for is the quote for this.

Where did you find the rubber

Adhesive damages the tire?

Where did you buy the plastic rubber?

Hei man! Nice video! What type of font did you used on illustrator? I see there is many people asking the same question,hope you can answer to complete our project just like you did it. Greetings!!

@tengotengos9000

6 жыл бұрын

The font that was used was Frutiger LT Com 95 UltraBlack

Wish i wouldve seen this before spending $120 and what software did you use? Can you link it please thanks for the video

@tengotengos9000

6 жыл бұрын

Adobe illustrator

Probably not getting an answer but what was the thickness of the rubber sheet?

@TengizAdamashvili

6 жыл бұрын

Jesse Aguilar why not? About 2-3mm

WHERE DO YOU BUY A WHITE RUBBER SHEET?!?!?!

Can i use regular decal vinyl to make this? And just use strong glue ? “Idk whats the name of glue they use for this decals”

@tengotengos9000

4 жыл бұрын

No, I tried, comes off easily since it needs to flex with the tire and vinyl is not as flexible, especially when cold.

@dazaussieguy1954

4 жыл бұрын

@@tengotengos9000 tried what doesnt it stay on

Where did you get the rubber sheet

A bit thick for my taste.. but you’ve inspired me and I made my own!

@alextravis8429

3 жыл бұрын

@Shawnda Chabot bought some rubber sheets from amazon and put a layer of reflective colored vinyl on them.. used my vinyl cutter to cut out the letters

@AdamPlays414

Жыл бұрын

@@alextravis8429 actually trying to do this, i have a vinyl cutter, but how did you get the measurements and curve?

@alextravis8429

Жыл бұрын

@@AdamPlays414 just measure your tire or you can make a template out of masking tape and trial and error cut a curve. what are you trying to make exactly? I might be able to send you a template.

@AdamPlays414

Жыл бұрын

@@alextravis8429 just michelin logo for the tires 225/40/18

what material did you stick with

hi!! :) well done!! Where can I buy that rubber sheet, ebay?

@TengizAdamashvili

7 жыл бұрын

Yes

@israelisaacgaldamezreyes4273

7 жыл бұрын

what is the name? please

@TengizAdamashvili

7 жыл бұрын

www.ebay.com/itm/Rubber-Sheet-White-6x6-Inch-by-1-16-in-Pack-of-3-Plumbing-Gaskets-DIY-/302208150480?hash=item465d026bd0:g:J6oAAOSw9GhYjCq~

@israelisaacgaldamezreyes4273

7 жыл бұрын

many thanks men✌✌ best regards😊

@TengizAdamashvili

7 жыл бұрын

If you're going to try making your custom decals, use rubber glue instead.

The software was it Adobe Illustrator | Vector graphic design software

Rubber sheet used to cut the letters What is it called? Where can I find it?

@TheSleepingHallow

2 жыл бұрын

ebay

Hey bro you should make a video on how to use the program....I'm having so much trouble making the letters wider...they to skiny but your are thick 👍

@tengotengos9000

6 жыл бұрын

use Frutiger LT Com 95 UltraBlack font

What is the paper to use.??

Dope

🔥🔥🔥🔥🔥🔥

Anyone have a link to find the rubber as I can not seem to find any at this moment. Thanks for the video mate.

@puppetmasterblaster

4 жыл бұрын

www.amazon.com/gp/product/B01N3W4155/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1

@puppetmasterblaster

4 жыл бұрын

just got some myself a few days ago. This is what I ordered.

@brandonpallas5043

4 жыл бұрын

@@puppetmasterblaster thanks. Wont let me buy it as they won't deliver to Australia. I'll have to keep looking. Thanks though.

what material that you used? any specific name? link to puchase?

@tengotengos9000

6 жыл бұрын

updated in the description

What Knife was that you was useing

que material usaste para las letras, y como metiste las medidas en autocad?

@rocioalvarez5830

3 жыл бұрын

Se utiliza nitrilo sanitario de 1.5mm

Hi there can I know what software are you using to design the lettering

@tengotengos9000

6 жыл бұрын

Adobe Illustrator

To print the design are you using Photoshop ??

@biggrime

6 жыл бұрын

pavel1809 you can Thats what i did

How do you get the measurements for the tire and how do I know how do plug them please help?

@tengotengos9000

6 жыл бұрын

plug them? about the measurements, try putting a masking tape on the tire, then take it off, put of a flat surface and you'll have your curve. Now measure the radius and use that value in the software when you're making the curve

@HayesTransport

6 жыл бұрын

did you just take a picture of the masking tape and just measure height and length then make that in the file? I made templates for my tail lights by using paper and then sliding a pencil around the edge.

@TengizAdamashvili

6 жыл бұрын

Hayes5ohh you could do that too, yeah Or you can put a masking tape where the decals should be all around the tire, then take it off, cut so it lays flat and measure the diameter

Hey how big are your letters

Awesome but I feel the rubber sheet is kinda thick

@TengizAdamashvili

6 жыл бұрын

it's as thick as the ones you can buy for $100-$200. It's called "raised" tire decals

Hey what is the name of that program?...If any one can please reply, really appreciate it...

@tengotengos9000

6 жыл бұрын

Adobe Illustrator

Hello nice work compliments, can i know how is the rubber sheet you used and where can i find it online? What name? thank you!!

@tengotengos9000

7 жыл бұрын

www.ebay.com/itm/Rubber-Sheet-White-6x6-Inch-by-1-16-in-Pack-of-3-Plumbing-Gaskets-DIY-/302208150480?hash=item465d026bd0:g:J6oAAOSw9GhYjCq~

@ManuelVarrucciu

7 жыл бұрын

tengotengo's m.ebay.com/itm/222515608594?_mwBanner=1 I bought in Italy what you see in my link, but I do not understand if it is identical to yours or if it is a different material.

@tengotengos9000

7 жыл бұрын

it must be rubber. Because it should be flexible and durable, because it will shrink with the tire as it spins

@ManuelVarrucciu

7 жыл бұрын

tengotengo's Try to see what happens and let you know 👍🏻 thank you for your availability

@ghalibabubaker88abubaker87

6 жыл бұрын

Gosh thanx for the tip... Will try looking for a similar rubber

I am not really good with computer and none of my friend ☹️☹️ can you please make the design for my tire I already bought rubber just cant get the print on paper please help mee

@Nordikaventurier

4 жыл бұрын

LMAO

How can I got it

Use rubber cement

what is the name of the font?

How did you make the round template over the cyrcle in photoshop

@TengizAdamashvili

7 жыл бұрын

write the text on a curve (don't remember how it's called) and then adjust the curvature manually to match the circle.

@worldpeace8824

7 жыл бұрын

Make a circle using the shape tool, hold "shift" to make it a perfect circle. Then click on the text tool and click on the edge of the circle you created.

@indecisivedesigns684

6 жыл бұрын

World Peace I think that’s illustrator

@indecisivedesigns684

6 жыл бұрын

Way I did it on photoshop was get the measurement of the tyre the same way he did my grabbing the circle tool - right click cause it will be rectangle tool as default. Click An drag it out but hold shift as said above^ An you will see it’s size. Then grab the T (type tool) click anywhere on the page don’t make a text box! An reduce the PT (size) to like 14-20 to make adjustments easy at first. When you have your word types hover he curser Over the end of the word an highlight it. Go to the top banner DON’T PRESS TILL I SAY THIS IS A GUIDE! An you will see the three icons saying “left align text” and. “centre align” ect ect. next will be the colour swatch (same as the circles colour of not sure) press the next icon to the right that has a T with a curve underneath (or sad face mouth 😂) Click that, it will have a pop up saying Style: none (default) Click on none An then select arc. From here you will notice the word imminently curve, from here you have three adjustments to muck around with to perfect the curve,

@itsshady6114

6 жыл бұрын

+ITSEVILGENIUS how do you measure the tires like he did?

What software where did you use to making the template

@TengizAdamashvili

6 жыл бұрын

adobe illustrator

Whats he using

If anyone found out what glue worked best for you, let us know. I’m going to try contact cement.

@TengizAdamashvili

6 жыл бұрын

Jeffrey Mac read the video description man, it says rubber glue

@danc1197

5 жыл бұрын

Black silicone gasket sealant should work. If its strong enough for your water pump than its obviously heat and water resistant.

Where did you get the white sheet???

@tengotengos9000

6 жыл бұрын

Ebay, just type white rubber sheet gasket

Conventional super glues won't work. The letters WILL fall of over time.

how did you measure the tire tilt and transfer it over to photoshop

I you teach me i am going to watch your videos and make mind am not buying any thanks to you mon bless up your self

hi. may i know what software you used to design??

@tengotengos9000

6 жыл бұрын

Adobe Illustrator

@JeffreyS00N

6 жыл бұрын

thanks bruh! :D

@JeffreyS00N

6 жыл бұрын

what's the font size by the way?? =D

Alguém sabe me dizer que cola é esta???

@AxlFirst

3 жыл бұрын

Cualquier pegante instantáneo... Busca 3M, es la mejor 👍

What kind of font You used?

@tengotengos9000

6 жыл бұрын

Frutiger LT Com 95 UltraBlack, added in the description

what software ?