Thanks for getting straight to the point! Great video x

Angie you are a life saver.

Love!!!

Wooow, Thank you ❤️

@AngieHolden

2 жыл бұрын

You're welcome 😊

Thank you

@AngieHolden

7 ай бұрын

You're welcome!

Thanks🌹🌹

@AngieHolden

2 жыл бұрын

You are so welcome!

Great video as always, now time to spend some more money on new supplies 😀 🤣

@AngieHolden

2 жыл бұрын

Have fun!

great ideals

@AngieHolden

2 жыл бұрын

Glad you like them!

@MyNailsandMorebyJohna

2 жыл бұрын

@@AngieHolden you are welcome honey

Great video most enjoyable thank you!!! Questions Angie I make jewelry and different things out of polymer clay would this work on it? thank you...

@AngieHolden

2 жыл бұрын

Interesting! I am not sure!

Great video. When you press the frosted acrylic blank does the paper stick to the blank after pressing? I find some paper sticks to the blanks and needs to be removed with water and rubbing it off. When this happens, am I pressing to hot? Should I remove the paper hot or cold? Thank you very much.

@AngieHolden

2 жыл бұрын

This one did not do that. I have experienced that before. Try changing your pressure. I peeled this one hot and didn't have anything that stuck. If it does stick, just allow it to cool this wash away the paper. It usually doesn't harm anything.

@LorraineCastellon-Rowe

2 жыл бұрын

@@AngieHolden Thank you so very much for answering my questions Angie!! I really appreciate it!! 💖🥰💖🥰💖🥰💖

@AngieHolden

2 жыл бұрын

Any time!

Thank you so much for this video. I noticed that you didn’t remove the silver ring from the lanyard keychain…. Does it not get hot or damaged when pressing? I thought they had to be removed before pressing.

@AngieHolden

2 жыл бұрын

It did not!

@nanette28

2 жыл бұрын

@@AngieHolden thank you so much. I followed your temp and time and it worked out fine. Yay!

Thank you Angie xx Love your video's. I tried the link for the frosted acrylic keyrings and it didn't work. Is there another link you could recommend please? I am in Australia.

@AngieHolden

4 ай бұрын

Sorry! I only add links that I have used and I don't have another brand for those.

I am having trouble with sublimation on a 4x6 cast acrylic sheet. The acrylic warps while in the heat press and I don't get an even print. I've tried reducing the temperature and pressure - started at 400 degrees and lowered to 385. Any thoughts on what else to try?

@AngieHolden

2 жыл бұрын

I am working on acrylic but I am just not quite there yet for a full video.

Hi im wondering if you know how to do name printing via sublimation on pacifiers? Im just trying to figure it out

@AngieHolden

Жыл бұрын

Sorry not sure!

When I removed the sub paper from the acrylic after heating and soaking, I have a hazy film on my acrylic. What can I do to fix that? I removed the paper with magic eraser and then wiped with a baby wipe but the foggy film remains. Thank you.

@AngieHolden

2 жыл бұрын

I haven't had any issues with that. Where did you get the acrylic blanks? My fear is you have a bad sublimation coating.

Is it possible to apply HTV to any of the blanks, AFTER applying the sublimation?

@AngieHolden

2 жыл бұрын

Hmmmm....interesting idea!! I would probably do the design on my computer and print on my sublimation printer instead of pressing a second time. If you do want to add HTV, try picking one that is a low temperature and low time.

@d.l.daniel2137

2 жыл бұрын

@Angie Holden I haven't invested in a sublimation printer, as of yet. Using a low temp HTV is a good suggestion. I'll have to play around when I get a chance to get back into my craft room, lol.

Every time I press and sublimate on neoprene Koozies. The neoprene gets completely flat and squashed. Doesn’t look right. Am I using too much pressure. Can I use minimal pressure. Or should I get a Cricut heat press instead?

@AngieHolden

2 жыл бұрын

My guess would be too much pressure by what you are describing. You can also put a pressing pillow under something like that so it doesn't squash the blank itself.

What kind of paper are you wrapping items in for pressing? Looks thinner than butcher paper so thought I' ask. Thank you.

@AngieHolden

Жыл бұрын

Try this: kzread.info/dash/bejne/rKZ5tMVmabXgd6g.html

@SimplyBoard

Жыл бұрын

Thank you very much.

I am unable to see the link for the lanyard keychains. Can you please provide that link?

@AngieHolden

2 жыл бұрын

Link is in the description below the video. On computer, click show more. On mobile, click the arrow to expand the description or swipe up on the video.

Can you do sublimation on acrylic blanks

@AngieHolden

2 жыл бұрын

I have on my list to do a video just on acrylic. I am seeing varying opinions on whether or not you need a special acrylic. I have been waiting on a certain tool to come in stock but I may just have to skip that portion of the tutorial for now!

Hi. Is it possible to sublimate this blanks using a sublimation oven? If so, how and which would be the parameters of time and temperature?

@AngieHolden

3 ай бұрын

I won't do these in an oven.

if doing a clear acrylic do I use the same process as the frosted method

@AngieHolden

Ай бұрын

The clear acrylic will have to be one okay for sublimation. You can do either from the front or back.

how did you print your sublimation? Did you have to measure the circles, and then did you have to cut them yourself?

@AngieHolden

4 күн бұрын

I measured them then printed the sublimation print to size. You can oversize something with a background a bit as it will not hurt anything.

Nice but no sublimation printer. Can I not use infusible ink?

@AngieHolden

2 жыл бұрын

Yes you can! Or even these sheets: kzread.info/dash/bejne/imdrrbahY6Wqd9o.html

@yolandabranner6200

2 жыл бұрын

@@AngieHolden thank you

I did acrylic keychain. I got white paper on keychain and bubbles and warped on keychain.

@AngieHolden

Жыл бұрын

The process works with a sublimation keychain. Poor quality acrylic blanks or ones that don’t say sublimation can be a huge issue.

@rebeccamuehl2183

Жыл бұрын

I did get one that said for sublimation.

I asked this on Instagram but then found this video so will ask here as well. I am just starting thinking about a home printing business to do part time and I don't really want to invest in an Epson ET printer and all the sublimation ink, etc., at the very beginning stage of trying this out. Is there another way to make custom prints onto keychains other than sublimation? Thanks so much!

@AngieHolden

2 жыл бұрын

I am working on a vinyl video!

@jovicrazed

2 жыл бұрын

@@AngieHolden Thank you!

@paular894

Күн бұрын

@@AngieHoldendo you have the video link for vinyl? I’m still beginner and don’t want to invest on sublimation printer just yet.

When you did the glitter on side of key chain, was it exact cut? What was temp?

@AngieHolden

Жыл бұрын

The glitter came on the keychains I purchased.

@jenniferdizney2002

Жыл бұрын

Thank you! Do you think it’s possible to do an HTV on the back?

@AngieHolden

Жыл бұрын

I would think so!

were do you buy the sublimation paper from and gloves

@AngieHolden

3 ай бұрын

I link to all supplies used in the description below this video.

My PU leather key chains are still printing out with a dull finish. Do you have any suggestions please?

@AngieHolden

7 ай бұрын

Maybe a protective film on them? or change time/temperature?

@BevSeagg

7 ай бұрын

Thank you for your quick response. No protective film but will try different time/temp settings.@@AngieHolden

Ordered from Etsy. How do I print all the sayings on one page for sublimation. This is probably a really simple thing.

@AngieHolden

Жыл бұрын

Try this: kzread.info/dash/bejne/c6Kum6-yqqzbcZs.html

Im having trouble printing a full page of sublimation print it always has white around the edges not making it edge to edge ,what am i doing wrong?i cant never make it long enough to cover the entire white upper parts even if i make the correct measurements when it prints its not the full size i put ,please help!i have a sawgrass 1000

@AngieHolden

7 ай бұрын

Sawgrass printers do not print edge to edge. You will always have a margin.

@lizpuertorico5968

7 ай бұрын

@@AngieHolden is there any program around this problem?

Mam when i sublimation on my pu leather after few days 10 to 12 days my print blur please help what i can do

@AngieHolden

Жыл бұрын

I haven't had that issue. It may be the leather blanks you are using. You may try a different brand.

@flashingclickofficial570

Жыл бұрын

@@AngieHolden thanks for your reply..

Mine keeps melting by key ring what am I doing wrong

@AngieHolden

Жыл бұрын

Not sure. Which version do you have? What time and temp are you using?

@graphicwarehousellcpassion3194

Жыл бұрын

Same here, it keeps melting the black part….help please

@daniellesmith6782

Жыл бұрын

did you ever figure out how to keep it from melting?

Black part is melting…. 385 for 30 seconds. Help please

@AngieHolden

Жыл бұрын

I didn't have that issue. Maybe the blanks you are using?

@daniellesmith6782

Жыл бұрын

did you ever figure out how to keep it from melting?

Hello, This video didn't tell me much. I don't see how it needs to be ironed with an iron, and whether the foil needs to be removed, what ink and what paper the pattern is printed on. That should be explained, probably everyone knows how to stick it. I don't understand English and it would be good if I could see how it is sublimated.

@AngieHolden

3 ай бұрын

Sublimation ink printed on sublimation paper from a sublimation printer. Each blank wioll be different as far as how you make it. I gave some examples in this video.