Pretty much exactly what I was looking for! Thank you so much for taking the time and effort to make and share this video.

Your mold is absolutely beautiful. Thank you for all your efforts. You're clearly a patient gal. :-)

Thank you! I'm going to try to make this :)

That's really cool!

I like the mold!

Good molds. Thank you.

Never seen it done like this. Nice

Very creative!!

Thanks that was beautiful

I subscribed after watching about one minute of the video. Thank you for posting 🍃🌸

@aymanhadjouri5100

7 жыл бұрын

san san

Are there any problems with mixing the second layer after the first layer has set up?

Can I make and attach new silicone to an older one ?

how did you protect your bars of soap?

Thanks for the video. What type of soap are those please ?

You did this upside down and could've saved yourself a lot of cutting if you had glued the bars down to a non-porous surface, made a box to contain the liquid silicone rubber and then just poured the rubber into the mold to cover the bars. Let it cure, de-molded it and done. No trimming, cutting etc.

@rogerthat7001

7 жыл бұрын

Truer than life itself. TKS.

@audryscraftingchannel3597

6 жыл бұрын

... I think she made the mold to line the box, like most soap molds do...

@sjeluitjens

5 жыл бұрын

Either way you will have to trim as some of the sylicone will seep under. I like doing it this way as I have more control of that.

@CliffordOkolie

Жыл бұрын

What is the name of the catalyst used with the silicon for making the mold.

What brand of silicone did you use?

Very useful thank you

Thank you dear. It's brilliant. How well does it work? Molds are really expensive.

I like it.

Where the soap came from? I never saw that part in the video

@enkisonofanu2301

3 жыл бұрын

I thought the same thing. A bit disjointed

Thanks a lot ☺️

Thanks for the idea... I had no idea I couldcmake my own silicone molds, but I have to agree with somebody else's comment... You should have put the bars of soap in first and then put the silicone in on top of it... It would have made the process a lot easier

@busybeehub5201

6 жыл бұрын

yes! just find a good way to make the soap stick to the bottom so they don't float up ;)

Fantastic

what if we make this process upside down...?

Beautiful indeed and indeed beautiful!!!!!!!👏👏👏👏👏👏👏💥🍻🍸🍷🍹🍺😎🆒

I will try this

WoW!

I am totally confused how you made the cavities in your mold . You showed the bottom part of the mold and then you let it set for 24 hours,, the next day you show the removing of the soap, what happen to the rest of the mold making with the cavities?

@Sourpatchmom725

7 жыл бұрын

Day 1 she poured the base and let it set. Day 2 she took actual soap bars in the shape she wanted, weighed them down and poured silicone down between the bars to make the cavities. Day 5 she unmolded.

What did you mixed with silicon please?

@margaritaherrera9151

3 жыл бұрын

Listened to video again. OR read instructions when you decide to buy product.

Thanks for sharing. Is this method safe and approved for chocolate and cakes?

WHERE CAN I FIND THE MATERIALS TO MAKE THE SILICONE MOLDS?

Please write the all ingredients to make moulds with there names by wt.

@margaritaherrera9151

3 жыл бұрын

She mentions the ingredients. You have to read instructions on products.

@alanlennon3871

3 жыл бұрын

you probably dont care but if you're bored like me atm then you can watch pretty much all the new movies and series on InstaFlixxer. Have been binge watching with my brother for the last months =)

Very nice mold. 😁

😍

What brand of silicone do you use? If you could give me a link or name I would appreciate it :)

@suzanneschristie

6 жыл бұрын

some information would have been very useful. But no, nothing useful here. So sorry, I don't like saying anything negative but really disappointing.

what you add to silicone

@tanyabonnett4174

4 жыл бұрын

Its the Catalist that's needed to make the silicone set up

Maybe you still need to weigh so you have enough to make it

The silicone that you removed from the mold can you reuse it?

@moodybloomscraftsandfloral

6 жыл бұрын

Ship 758 of course not.

@RachelleLang1

5 жыл бұрын

Actually you can, there is a KZread video that describes how to recycle silicone molds to make new ones. It saves you 50% on making a new mold.

@LouiseFranksArt

4 жыл бұрын

Rachelle Lang agreed, you can use it for bulk, to reduce amount of fresh silicone product needed.

How to make silicone mould? Already do have a wooden mould....

You are indeed excellent what beauty. Please, what are the measurement for the silicon and small bottle content?

@LouiseFranksArt

4 жыл бұрын

ogbonna martin uzoma it depends on the individual brand of silicone, but it is always stated on the packet exactly how much product to catalyst.

Kool I like

Missing some part of video after 24 inch...from where soap came here

OMG just my opinion but I think I’d rather buy a mold

Hehhee

nice try

Oh girl just put your soap on the tray and mold them your process should be upside down 😂😂😂

What a pain in the keister! Nope. I'll pass. There's a better way to do this.

The sound is so distracting 😔

Not explained very well at all.

please translate into Arabic.

There is a part of the moldmaking missing, the lady speaks as if she lives on an ocean bottom, sorry, it' s not a good tut.

YOU NOT EXPLAIN NOTHING, HOW WE SUPPOSE TO LEARN???

Not explained very well at all some more information would have been very useful.