I made one of these 3 years ago. It is an evaporative, or swamp cooler and yes they do work and put out nice cold air, my air from the unit tested at 67 degrees F) until the humidity in your room gets so high, no more air can evaporate. It stops cooling after that. In my bedroom, I could lower my air temp from 85 degrees F to about 80 before the humidity hit the 60% range and then no more cooling until the humidity dissipated, which took several hours at which time the temp was back up to about 85 again. If you live in a very low humidity area (Like the south west US) then these will work much better than mine did here in Kentucky. You did a nice job on this build and it looks great too.

@paragg7859

2 жыл бұрын

this cooler should be kept outside the room, I mean to say install it in a window, then it will work better.

@doctorpetrovich9296

2 жыл бұрын

The best place to position your air cooler is right in front of the window. Hotter the air, faster the evaporation and cooler the air blown out by the fan. It’s also important to create good ventilation in the room to push the humidity out. In order to do this, you need to open windows in the room. Take care not to open them too wide or it will only result in increasing the room’s temperature. You can experiment by adjusting the window a little to improve the amount of cooling.

@OverlandOne

2 жыл бұрын

@@doctorpetrovich9296 Unfortunately, here in Kentucky, it can be 100 degrees outside with very high humidity so opening a window only makes it worse inside.

@doctorpetrovich9296

2 жыл бұрын

@@OverlandOne ahhhhh i see

@sonalshah1922

2 жыл бұрын

Pp0pppppppppppppppppppppppppp0ppppp0pppppppppppp000ppp0pp00pppppvpgpg00 ccc

Loved it. Not a big fan of swamp coolers, because I live in a humid climate, and had the commercial ones in bedrooms as kids in the 70's and 80's. But we knew how to rig one up outta anything living in the country. It's nice to see someone sharing info. Lord knows they don't teach survival or self sufficiency in schools nowdays. Ty.

Nice Job. Very clear steps and excellent demonstration. Thanks

Nice concept, very useful air cooler for one person sitting in a small shop or workshop or garage shack. The plastic body does not get rusted like the metal ones, no fuss in getting it cleaned for next season. To clarify some comments, this cooler can find many buyers in most parts of india where summer is harsh and who cannot afford other big size air cooler let alone an AC. Actually one can easily tweak the circuit with 3-core wire and can connect the ground wire to the metal bracket of the fan and u have a shock proof body (plastic body is already shock proof). The fan regulator and switch can be fixed on the front side instead of on the side, it is more safe. Of course, please keep away from small kids. Good for science demo project for middle school students.

I use a swamp cooler at work cant live without it. great build keep the good work comeing

The best yaar aise product ko bazar mein utaro sasta aur Sundar taki sabhi garib cooler kharid sake . You have good talent

@cncpunjab

5 жыл бұрын

Sirf 1 bande ke liye

@Technicalshyam5

4 жыл бұрын

Bro I also make these kind of videos on my channel please go and visit

Thật Hữu ích. Thank you!

Kamaal ke jugaad lagaya bhai.....kya talent hai guru ...wah....

It's just an excellent idea!! Great job man😎

@hishahbax5121

4 жыл бұрын

Hi

@edutech4790

3 жыл бұрын

kzread.info/dash/bejne/g2Fmm7SxqrzSoZM.html

مشكوووور على روعة التصميم والاداء الرائع في فكرة نظام التبريد.

This application very good for dry weather

Exelente proyecto !! Saludos de Monterrey México!!

Fantastic work, bro! Really well done! 😃

@CreativeLifes

5 жыл бұрын

Thanks........☺️☺️☺️

@MCsCreations

5 жыл бұрын

@@CreativeLifes You're more than welcome. 😊

@ravinaveen6999

3 жыл бұрын

@@CreativeLifes where it buy this things

i learned. 1 thing with this video . cooler graas = honeycomb pad 👍👍👍

@sabyasachisarangi

5 жыл бұрын

Nopes, cooler grass and honeycomb pads are two different things. Both are used by manufacturers.

@ehekkert

5 жыл бұрын

One thing the video doesn't teach is that water and electricity don't mix well and that the contraption is a huge safety risk.

Good innovation, simple but not secure, and it is best to put cold water

Great job mat. Thanks

Very good video nice one thank you brother 👍 👍 👍 👍 👍

Superb and spectacular video really appreciated your talent

Super bro with 650/- I purchased Tata Voltas cooler last year with 13000 but it worked for one year. Really it's waste of money for purchasing coolers. Your idea is good

عاشت الايادي ورحمه الله ولديك

Yes I could see the fan is working!

عمل ممتاز ولكن عندي ملاحظتين الاولى( كان بأمكانك تركيب كل البضاعه بعدم فتحها من فوق الثانيه (خرطوم يبين منسوب المياه )تابع بارك الله بك( مع لوكانت 12vامن 220

@user-bi3dt9yz2c

5 жыл бұрын

ههههههههه شيفهم منك هذا الفديو هندي وصاحب القناة مجرد سارق الفديو وكاتب عليه بالعربي ومنزله على قناته 😉

Very Beauiful... Thank You

Best build bro keep it up good job.

Portable swamp cooler. Cool to watch you build this. Most have zero idea on where to purchase these tems however. Perhaps you could provide links to items needed for sale online or hints to what store one could purchase these items?

Good job Masha Allah you are talented.do more experiments on making something best.

Nice cool temporary AC big respect man from 🇩🇿

@tonytom561

4 жыл бұрын

Kach ma seyitha kho

جميل روعه عاشت ايدك ☺️🌹👏👏👏

@user-iq9wt1th6y

4 жыл бұрын

@Maryoma Maryom هذا يسمى ليف كرتوني

If you had given all the shopping links in the description it would have been better ... it is a very useful video ... Thanks for the video ...

You've remarkable thing right here.

Thanks bro your expleying so clarity

Cheap and every pocket can afford it Good What a talent

Nice presentation with market rates & budget ...👍

Bhai ye mene Bana liya 👍

@ezhavaganesh

3 жыл бұрын

Cooling acha ha kya

@pkiller8236

3 жыл бұрын

mujhy b bna day plz

it's 100%working and cooling thank you for your tips and tricks........ keep it up Sir. . . . . . 😊😊😊😊😊😊😊😊

Good job..if someone os making this use a hamper or waste basket as you could put fan and rear pad holes higher alowing more water and not have to refill as often

excellent idea..it is a small air washer used in USA (cold water spray injected to the drift eliminator to enlarge the heat transfer area between cold water and hot room air) the same application as the cooling tower for chilld water plant

@carlschmiedeke151

5 жыл бұрын

Yeah, it's called a smaller version of a swamp cooler

Awesom bro how do you get this kind of ideas it,s really good ..Simply superb..

@marlonglodo1930

5 жыл бұрын

Search for IWATA air cooler

@siprasardar6707

4 жыл бұрын

@@marlonglodo1930😧😴😐

Realy very nice idea.. good job and nice cooler...

very nice air cooler because switch options will be not good and not safe and every things is good my name is shivansh singh

Superb brother. I think u r a perfect engineer with a creative mind person.wow

@hayyabakhtar6180

4 жыл бұрын

Lanat Tari

Most commercial evaporate coolers are made in a VERY similar way. Keep in mind that they only work in dry environments. I live in a high desert environment and evaporate coolers, also called swamp coolers, are very common, but even in this environment there are days when they just don’t work due to the relative humidity.

@joker4770

3 жыл бұрын

Me too

@user-iq8xk4zn9e

Жыл бұрын

Какая-то хуйня короче.

احسنت فكرة رائعة ومفيدة

Great job!!!

I don't see a big shock risk as everything is contained as is in your typical swap cooler great job.

@ammarbelhasrouf7273

4 жыл бұрын

تباقلل لاتنوزز

*_Your idea is amazing_* 👍👍👍

Quạt phun sương tự chế nè! Ai thông minh, khéo tay thì làm cái dùng chơi cho mát nhà, mát phòng, ngủ ngon chớ. Mắc gì mà cữ?

Very nice product brother but if u can isolate electric switch by some method it will be more safe

You made what they call down out southwest a swamp cooler works great in low humidity areas but not very good when you have high humidity

top bro you are the best

अगर आप ने ये सब चीजें online marketing की है तो please link send kariye na because you are making it fantastic .

Thank sir g

When fit the switch and regulator back side cover with two module box because this area wet area chance of getting shock and extend fan regulater life

@roshanmajhi2153

5 жыл бұрын

Point

@Technicalshyam5

4 жыл бұрын

Bro I also make these kind of videos on my channel please go and visit

@ryansubbu4008

4 жыл бұрын

Mohammed Akber , was about to tell, more over the fan motor and other iron fittings gets rusted due to wet conditions better to use plastic brackets and why use the can one can build a regular shaped box out of clear sheet one can see the water flow also.

@mohanbansariinsan913

4 жыл бұрын

Woh gye shaayad

@nehanarsi5128

4 жыл бұрын

1500

واو جميل ❤️

Wonderful ideas of invention

Its very nicely assembled, really appreciate the creativity👍👏👏👏👏 very nicely illustrated the procedure of making cooler ..so nice ...what exact the capacity in liters for the water , how to prevent the water which circulates in honeycomb pad is prevented from getting spread on wires of switch and regulator wires ..The water which we pour inside , how to protect its spilling on wires and fan .

Like Seriously wow.

Today um going to bring these items and making one for me. 😁😁😁

YOU MADE PERMANENT AIR COOLER. WELL DONE.

🙏👌 superb madam...

Very first drill ap k hath mn hojana tha, ehtiat se kro Bhai, and good job by the way

He never did show us the air temperature coming out. That’s the way to tell if this is worth anything

What a creative idea🙏

SUPER BRO VERY VERY NICE THANKS

Nice try ...👍.... But its not safe.... 220v and all the electrical connections will get short for being so exposed to humidity ... and the screws will rust since they are not painted or have any coating... better use plastiz zip ties instead and above its too noisy.... u can get far better throw if u use the blower blades and DC 12 v they are much quiter... but still thumbs up for being creative and effort... thank you.

@CA-tk8yn

5 жыл бұрын

@Jason Adams Open your mind and stop being so ignorant. You can learn a lot from others Mister Knowitall, especially if they are from an area of our World that doesn't have easy access to things we take for granted. Shallow mind!!!!

@saltybull

5 жыл бұрын

No ground at 220v! Enjoy the mold right as you fry!

@jamiebutler1762

5 жыл бұрын

I agree, if your gona make any thing with water and electricity. At least gfci protect it.

@surthanigowtham3914

4 жыл бұрын

Nice

Solid dimad humancho

@Technicalshyam5

4 жыл бұрын

Bro I also make these kind of videos on my channel please go and visit

A esa velocidad el agua salpicara si esta encendida al mismo tiempo que el ventilador y cuando este muy humeda tambien

wow great work,great idea just love it

I guess its time to do some bargain in the local market. Lets go

wow just amazing bro i am really feeling inspired by watching it & also getting a feeling that i must also try this once coz i really had a bad summer and i have got financial ruckus too...Bro one request to you is that can you please put the links of the parts that you had used to create this..Thank you.

@vilmascheffer984

4 жыл бұрын

oñz

@jewjoey8633

4 жыл бұрын

piste

super. Please put the switch out side. can be made with AC out door unit also.

Bahot hi badhiya hai

Awesome bro...

Amezing!!! Where to buy cooling pad?

@feoo123

3 жыл бұрын

City saddar road rawalpindi.

Thanks for sharing. Few tips . If u make it with cooler box & add gel ice packs down. It gives cooler air for longer time !

@CreativeLifes

2 жыл бұрын

Great tip!

Super experiment brother very very nice

The best clip I have ever seen, specially the circuit diagram. One Q plz. Are both, fan and water motor, on AC?

Make a video on how to increase the range of a toy walkie talkie

Very good and nice cheap and best noise less

Beautiful best thanks to you friend

You built a good idea but the connection is danger but actualy i admire you

Very creative dear keep it up

Very nice mast hai bhai tera coolar

Very nice, thanks for the Idea

2.5 cooler motor 490 Rs Water pump 130 Rs Metal blade 80 Rs Metal net 30 Rs Honeycomb pad 120 Rs Switch 50 Rs Cable 50 Rs Total budget 950 Rs Ok nice idea but switch is not safe

@mdadilrameezkhan

4 жыл бұрын

Moter ac raha ga ye dc

@sraju6462

4 жыл бұрын

Out door lo 2 way gang board vesukovali my suggestion

@mdadilrameezkhan

4 жыл бұрын

@@sraju6462 matlab

@sraju6462

4 жыл бұрын

@@mdadilrameezkhan Ac 230v motor khan sir

@mdadilrameezkhan

4 жыл бұрын

@@sraju6462 sirf 230v moter bolna se miljayega blade size

Whenever I see your channel name I subscribed....nice video

Very nice water pump

Fantastic cooler investment and you dont have to use the ac in the home good way to save electricity and money probably.

Fan motor coil will be low insulation and may be damaged due to moisture inside.

So, what was the temperature to begin with? What was the temperature with just the fan going? And finally, what was the temperature with the evaporator in action?

@hamidhamid7261

5 жыл бұрын

8ننننن

Very nice this cooler you can make your idea

@manishabhoi4573

4 жыл бұрын

I like this cooler

@CreativeLifes

4 жыл бұрын

Glad you like it

Beautiful cute Lil cooler superb bro

Great job ma

Good idea, never know when we have to create our own resources from our hands and inventive . No kidding but I have though a lot of time about that scenario while I play any version of Fallout video game. Could I suggest a dust filter for the honey comb? Dust is more than anyone could guess and will start to dirt the honeycomb, the water will drag some of that waste and will turn dirt the water in the tank , finally colapsing water pump. With the same purpose, a sealant ribbon could be fine for the edge of the upper lid. The other suggestion I would make is to put some ice blocks into the water tank or even better, chem ice packs easily interchangeable from time to time with others in the fridge. Even better, how about to put a freezing circuit with freon or another coolant ? That could be get from a spare old fridge.

Nice idea and appreciate your work but it will have many practical issues.

Very excellent 👍

Hey bro would you like to sell it?

i wish there was a thermometer to see the temperature, sadly there is not

Very nice and simple

Very easy method.