One last note - As a teacher, thanks so much for including your initial failure, with this project. It's great to be able to show students an example of how we shouldn't always see failures in a negative light, but rather, as learning experiences. It speaks highly of you to have included yours.

@constablebrew

5 жыл бұрын

Your students can see their failures in a parabolic light now!

@Evan_Case

4 жыл бұрын

If I were to do something like that I'd have to edit out the "son of a bitch," that inevitably follows that first failure.

@11moonshot

3 жыл бұрын

Ha! Another physics teacher here! I used discarded satellite dishes... No big deal to cover the concave side with aluminum adhesive strips and make a perfect parabolic mirror! The effect were awsome!

@uncaboat2399

2 жыл бұрын

To their credit, the Mythbusters TV show did this all the time. Arguably, their failures were more entertaining than their successes, but each failure (sometimes several in a row) resulted in data for the next attempt.

@utetrahemicon

2 жыл бұрын

Success through Failure: The Paradox of Design by Henry Petroski is a great book and his other books as well.

Nice! It's great to see the whole project -- including things that didn't work.

@bartacomuskidd775

6 жыл бұрын

Love your work too Krasnow.. Home made ruby lasers, electron microscopes and aerogel.. forgetaboutit. Favorite is the examination of supercritical co2.. keep up the good work guys.

@josephsalavtore5790

5 жыл бұрын

interesting points ,if anyone else trying to find out why solar energy for home try Ewans Energy Roadmap (just google it ) ? Ive heard some super things about it and my work buddy got amazing success with it.

@En_theo

5 жыл бұрын

Yeah, I liked the whole trial and errors steps, was quite satisfying to see how perservering brings results.

@gugxnxx.com.m.commerhaba2875

4 жыл бұрын

@@En_theo TRNC .

@SciHeartJourney

3 жыл бұрын

I especially love the FAILURES. A lot times I ask, "what if", and it's usually one of these failures that's my answer.

You should be able to buy a roll of mylar from a hydroponic shop, their used in grow rooms, and won't have creases!

@DrRudy-em5nw

3 жыл бұрын

i was always using it for growing cannabis

@Michaelf122

2 жыл бұрын

They definitely dont use mylar in grow rooms, at least not mine and it makes no sense for the fact you have to remove and replace every harvest👀 most just use lab grade white board material 👍

What's pretty neat about aluminized parabolic reflectors, and "funnel" style solar ovens, is that they can also be used to cool objects as well at night , by radiating the IR energy up into space. Make a container that is very well insulated in relation to conduction and convection, but very transparent to IR, find a part of your yard with a clear shot to the sky, point the reflector straight up and especially on cloudless, dry nights, over night, the contents inside the container will significantly cool in relation to ambient air temps.

I love how you uses smoke to show the light! Great video

@BizillionAtoms

5 жыл бұрын

What is just regular smoke?

@Competitive_Antagonist

5 жыл бұрын

Probably a fog machine. Looks amazing when you see the light rays focus to a point.

@helpmeiamenslaved3116

4 жыл бұрын

Love how u speaks

@octaviusgalacticus2253

3 жыл бұрын

If it was smoke it would probably light on fire its most likely fog

@octaviusgalacticus2253

3 жыл бұрын

@@helpmeiamenslaved3116 😐

Very nicely done, and thank you for making a well-organized video that didn't take five times longer than it needed to, like most KZreadrs seem to do!

it was a true pleasure to hear you speak, and watch you work.

An idea that I have been wanting to try is to use a discarded DishTV antenna. Use the same "Space Blanket" foil to glue to the antenna. The antenna is an accurate section of a parabola with off-axis focusing.

@dhaferh4995

3 жыл бұрын

Hi..bro ..please can you help me to write the materials that're used to make the blanket mirror..and the steps if you can..because my university requested from us to write a report about it.

@my_dear_friend_

10 ай бұрын

I have done that. Found a large one (36") and covered the inside with mylar. We cut many mylar hexagons (4" in diameter) rather than a vacuum. It allowed for a wrinkle free installation with spray glue. The completed mirror put things on fire easily.

I like that you showed what didn't work and used whatever was available to keep going

I did a similar thing a few years ago where I stapled down the mylar with a layer of cloth over it in a circle onto a piece of plywood with a hole in it that I attached my shopvac to. Then I inflated it and applied some resin to the cloth, which stuck it to the mylar. After the resin cured in a couple of hours I just cut off the dish with some scissors. It was pretty floppy, but if I added a ring like you did I imagine it would have been fine.

Nice work. Space blankets are quite transmissive, and wear very easily. I've used hydroponic mylar for parabolic troughs in the past, it's significantly more reflective, thicker, just as cheap, and a little more durable tho still not enough to just leave outside.

Neat idea! I like how you showed your various attempts and what you learned from the failures. When I was a teen, I made a solar stove from a plan I found in a book about solar energy. It consisted of cardboard panels with aluminum foil taped on, and a plywood frame to hold it all together. Certainly not the most elegant thing, but it worked pretty well and I astounded my family by cooking a hamburger with it!

@KarlsLabReport

3 жыл бұрын

Joe Tairei I read that same book as a kid!!! Great stuff!

That's really cool! How long does it take to set cardboard on fire on a sunny day?

@Nighthawkinlight

7 жыл бұрын

No more than a second or two

@atomic_wait

6 ай бұрын

@@Nighthawkinlight Always humbling to see how much energy the sun dumps onto a square meter of the Earth every second, even far from the tropics, despite being 150,000,000km away. Just too bad it's difficult to capture and store all that energy at an industrial scale.

@informalchipmunk5775

3 ай бұрын

Davehax wtf

This is one of the coolest DIY videos that I have seen around for creative stuff.

DUDE - this is absolutely awesome. Best creative thinking I've seen in ages.

absolutely amazing, innovative craftsmanship and video!!!!

This is beautiful, and a fantastic idea! As a physics teacher myself I will be sure to make one of these as demo pieces for my students. But I would also show your video so they can see the process you used and that initial failure... er... learning experience. Thanks so much!

@SapioiT

2 жыл бұрын

As a student who can legally be a teacher, I have to mention that you can use different materials, as well. For example, instead of fiberglass, a bit more resin and more layers of paper might work better, or even cardboard, or a mix of both. Instead of mylar, you can use wider rolls of aluminium foil (tinfoil) than those used for cooking. Even aluminium foil for cooking works, for smaller parabolic mirrors, especially for smaller parabolic curvature. You can even make reflective telescopes that way, with paper, tinfoil, and black plastic bags to make the paper tube of the telescope opaque, and have the paper tube hardened by resin, and have enough layers of paper, so it won't easily be crushed.

Not bad at all! I like this design better than the one where they temporarily suck the dome in from the rear, yours has a fixed focal point, which makes it better for a lot of applications. Thanks for sharing, the compressed air + fiberglass idea was brilliant!

Terrific video! Can't wait to try out some of these fantastic DIY ideas. Thanks!

I was playing with these long ago. After several versions I made just two flat rings around 3 feet in diameter. I placed a tire valve into a hole drilled into the rings. Then I took a clear piece and a mirrored piece placed them together and bonded them between the rings so the valve is between the films. Then pump air inside and it inflates like a balloon. The rings keep the lens stable. This can be scaled up quite easily to make giant mirrors. If you wish to replicate this feel free to do so. You may need to add a spacer ring to allow the space for the valve.

@macrumpton

3 жыл бұрын

I remember seeing this scheme in a drawing of some proposed solar reflectors destined for orbit. They used an inflatable torus for the ring. The thing I like about this is that it can be safely depowered by changing the pressure inside to make a convex mirror.

Sometimes I wonder if I could have done things differently. Then I remember I probably wouldn't be subscribed to this channel. What a time to be alive.

@NKG416

7 жыл бұрын

nice profile pic

@NKG416

7 жыл бұрын

+Random Stranger you talking to yourself??,cool cool

@MyTurtleCollab

7 жыл бұрын

I feel it fam, don't let them nobody's bring you down ya dig

@devinmatias7528

7 жыл бұрын

+Random Stranger possibly never run around, and hurt you?

@devinmatias7528

7 жыл бұрын

And also it's a bit ironic being a time to be alive when your friend Nagasaki suffered a worse fate

I'd love to see more of this telescope project!

Wow!

Bought a ten pack on Amazon. I used spray adhesive and glued several gold foil space blankets to a tarp. Tried it out a couple of times and it reduced the temperature under them by 20 degrees. Great to put over your tent when you're camping in the desert. Tried them in the winter too. Hung the tarp inside of my tent by surrounding my sleeping bag. Outside temp was 21 degrees F. Temp inside the tarp 59.

@trollmcclure1884

4 жыл бұрын

or when you need to hide from police helicopters and their cheeky thermal vision

@midgetman4206

2 жыл бұрын

@@trollmcclure1884 But the giant shiny thing is visible by our eyes

@kgfifilgil

2 жыл бұрын

@@midgetman4206 you can put leaves on it and stuff. It’ll still act as a barrier for infrared. Didn’t some murderous hobo hide from police helicopters like that? I forget.

Great job! Thanks for including all the mistakes also.

Very cool! I think you might get an even better result by making the circle frame for the mirror first (ensure it is perfectly circular), then gluing the space blanket to that.

human ingenuity is awesome, at every level, and a lot of work makes the project actually happen...

Revolution! Perfect Idea for selfmade!

you always have amazing project man! when my situation allows me, i'm gonna become a patreon for sure!

Nice video! I was thinking it might be easier to create a high quality mirror without the fibreglass. Just create a box with a circular hole, place the film over the hole, and apply suction to the box. I know it will be more fragile, but the mirror would be near perfect. Also the focal length would be adjustable. There might be some limitations I'm not aware of, but would be interesting to compare the performance of both methods.

I've always wanted to make one of those, and you came up with a good idea to form the paraboloid shape

PRICELESS. Larger the radius at this curvature, the more distant the focus point. Can come in handy as alternative protection.

I have been looking for exactly this spark of genius! Thank you so much!!!

Such a nice project - but hearing about the "square larger in diameter" made my day :D

love your videos Years ago I had the experience of coming off an escalator and almost stumbled because my eye caught a mirror setup like yours but with two little differences that made it eye catching. One they had some surface that was a bit more mirror like so the reflection was good. Two they had not backed the mirror up with a hard surface - it was stretched taut across a ring and the space was pumped with a small bellows that caused the internal pressure to go positive and negative. So their mirror was like a fun house one - cycling between concave and convex. Very arresting image.

An absolutely stunning piece of craftmanship and innovation.

Oh this is awesome. Thanks NHIL for posting on my birthday too!

@Nighthawkinlight

7 жыл бұрын

Happy birthday!

@gabewrsewell

7 жыл бұрын

Thank you both!

@zoowoo7898

7 жыл бұрын

happy birth day

@TheFilledk

7 жыл бұрын

Happy birthday GabeS :-D

@gabewrsewell

7 жыл бұрын

Thank you two as well!

You're a fan of GreenPowerScience? Love your customization of these products. Some of which I've seen elsewhere and some I've seen here originally. The ones I've seen elsewhere are still cool because of the customization.

Wow! Thank you for another well made, informative video. Just imagine the savings these mirrors make over burning fuels. Awesome!

Excellently done. Thank you for posting!

Very easy to make, and it packs some heat! :-) I have to say, the audio quality of your videos is outstanding. I need to look for better audio recording equipment.

@Nighthawkinlight

7 жыл бұрын

Thanks! The Blue Yeti seems to be the youtube standard mic. I use a Shure VP83f which isn't made for vocals specifically but works well.

@electronicsNmore

7 жыл бұрын

+NightHawkInLight Thanks!

@farficknuger3673

3 жыл бұрын

Hahahaha caulk ring

@catthecommentbothunter6890

2 жыл бұрын

@@Nighthawkinlight i made my own concave mirror but in a smaller diameter because im gonna use it to my telescope

make a round ring to hold the mylar down instead of just epoxy, then you can really put pressure to the mylar. Make the ring just smaller than where you glue and round the edges 2mm radius "so mylar does not tear" then run your fiberglass and fiberglass the ring to the mylar as well. Now you have the stable mirror and you do it all in one process.

@lidakirichenko2534

4 жыл бұрын

Good congratulations!!

Great demonstration on how to build your own parabolic mirror. I was considering buying one from Amazon, but not now. I really appreciate comments of failure or "this didn't work like I thought it would.." and then how you fixed it. Keep up the great discoveries for us folks out here in bleachers, watching you. Hartley (garden grove, CA)

You and people like you can solve this world's energy problems. Good work.

5:40 marriage in one sentence.

@favoritemustard3542

4 жыл бұрын

Marriage *IS* a sentence!

@V.Z.69

4 жыл бұрын

@@favoritemustard3542 "Some calk secures the ring in place" -- calk sounds like the rooster, cock.

@helpmeiamenslaved3116

4 жыл бұрын

Wooooow

@SDS-1

4 жыл бұрын

Not if she finds a bigger tube

@Elie-J-Saoud

4 жыл бұрын

4:05 looks more realistic :)

Nice, but note obvious the resulting shape should be parabolic. Due to the equilibrium between tensions (i.e. blanket and pressures), it rather be closer to a spherical shape. This explains the aberrations we see when you blow smoke at the focal point... but it's a better point because you need a good repartition to heat, e.g. water in there !

Thank you for sharing this process. Fascinating!

I identify with your thought process. Well conceived

Excellent! I'm interested in parabolics for solar heat investigations and this looks like the best construction method I've seen so far. Thanks v much. I don't know enough to understand the geometry, so do you know if your inflation shaping method could produce a parabolic trough? If the film was glued down around a long thin rectangle? Hmm, I guess you would have to shape the ends.

A $1 space blanket... And $200 of other supplies. Jokes aside pretty cool.

@zacharysaintcyr1725

7 жыл бұрын

1$ blanket 20$ of wood 10$ of backing 10$ of fencing 20$ of resin seems pretty cool for a mirror that sets stuff on fire

@JonBruce-BlueDev

7 жыл бұрын

True, but a 2-inch magnifying glass will start a fire too. That's closer to $3. I used to use magnifying lenses to start fires all the time. I got really fast at it.

@JonBruce-BlueDev

7 жыл бұрын

***** I actually started a fire with a 1-inch magnifying glass in about 10 seconds. Not just a smolder, a flame. I've done it plenty of times, and a 6-inch lens can start a fire within just a couple seconds.

@JonBruce-BlueDev

7 жыл бұрын

***** Never thought to or tried to, but as that is several thousand degrees my thoughts are that it would take a well-shaped 2-foot lens. :P

@JonBruce-BlueDev

7 жыл бұрын

***** I've seen and studied fresnel lenses on and off, actually visited a lighthouse in Oregon that used massive ones. Pretty cool lenses. :)

Brillaint concept, insightful construction process, well produced video!

It is interesting. Excellent method! Thanks

This method might work for making parabolic sound collectors like you see on the sidelines at football games. Nighthawk, maybe you could make one and see how well it picks up distant sounds. Thanks for all your work!

@favoritemustard3542

4 жыл бұрын

Hmm ...I picked up a snow sled at the end of last season for $1.50... Have been using it to help rake up leaves but I think I'll put my mic on "interview" mode & tape my phone to the middle..!

@wictimovgovonca320

3 жыл бұрын

Now that is an excellent idea as the wavelength is so large that a perfect parabola is not needed. I expect that more layers of fibreglass would help however.

@brokenpencil57

2 жыл бұрын

See comment way above regarding the apparent focal length of F 1.0. -waay too shorth, meaning that the focus (point where you're listening) is equal to the lens diameter, or about 3 feet away for this one. Would need a much, much flatter shape, say 50 yards/1 yard lens, so F 50.

Awesome idea! I suspect matemaematically this should be a catenary, not an exact parabola, but it burns cardboard, so it is close enough! What if you sucked the air out instead of inflating it? I mean, with the circle already in place and closed from the bottom.

@jamesmcpherson3924

Жыл бұрын

Came here to make the same comment!

@my_dear_friend_

10 ай бұрын

It would make it very difficult to fiberglass the inside of the mylar.

Green power science did this many years ago. But used a garbage lid and a vacuum. It's worth a watch too. I like your design also, great work.

Thanks for sharing your project/ideas.

To make a telescope, the parabolic curve would have to be much, much shallower to get a longer focal length. Telescopes tend to have f ratios of a minimum of about f/4, and anything up to f/12, meaning the diameter of the mirror is 1/4 or 1/12 the focal length. So for a 1 foot diameter mirror, you want a 4 foot to 12 foot focal length. The mirror shown here seems to have an f ratio of about f/1. To make a shallower curve, you could pour water into the middle of the mylar, stretched over a circular hole. Stretch the mylar out very tightly by clamping with lots of G-clamps over another material to spread the load. It is important to get the tension equal all the way around to get a symmetrical shape. You can check the focal length by shining a torch onto the mirror and trying to get the reflected image of the torch's filament or LED in focus. However, the water will probably affect the focal length, but I haven't done the calculations to work it out. I like the fibreglass idea, but you could probably bond a rigid support to the fibreglass with vertical and horizontal cross brace rib pieces similar to an aeroplane wing construction, before removing the clamps. Then bond those ribs to a solid base and cylindrical side-wall and it will be really rigid. I'm not sure how viable this mylar would be for imaging, as it looks a bit uneven and the reflections look kind of blurry when compared to a polished piece of metal or metalized glass mirror. Another method to consider is metal spinning - spin a large piece of sheet metal and bend using a tool to match a former underneath. I wonder if vacuum-forming (vac-form over a large open hole) could be used with a metal-coated plastic sheet, or maybe you could electroless-plate a normal piece of vac-formed plastic with metal? You could even ditch the vacuum and use heat to make the material sag under its own weight, or use water or sand to weigh it down.

@leehaelters6182

2 жыл бұрын

@jimmimak, it seems to me that the curve achieved by the air pressure method in the video must be spherical, rather than parabolic, as the pressure will be exerted perdendicularly to the surface at all points. Continued inflation would lead to a spherical bubble, if the material was elastic enough. Your method of dishing the surface using the weight of water must give a different curve, as the direction of the force applied at all points will remain almost perfectly parallel over the width of the surface, I imagine. I want to think that the curve achieved would be parabolic, but I cannot determine why it should not be a catenary, which is the curve assumed by a cable or thread strung between two points and acted on only by gravity. Do you have any thoughts on this?

@leehaelters6182

2 жыл бұрын

If elaborate on this with a thought experiment, I wondered if the focal length of the curve with the water method could be controlled by adding a greater weight of water. That is to say, I imagine the mirror at the bottom of a column of water, however, I think that this puts us back in the position of hydraulic pressure, rather than pneumatic, acting equally over the surface and forming a sherical dish. Does this contradict the idea that the elastic mirror, responding to the pressure applied by water filled only to its brim, might give the parabola we seek? What do you think?

@jimmimak

2 жыл бұрын

@@leehaelters6182 Interesting ideas. I think you're correct about the hydraulic pressure, but my guess is the difference would be too subtle to notice. Perhaps with a denser material you would get a more noticeable parabola? To make the parabola, I've had a few ideas, but they might be too wacky or extreme as the shape needed is probably more subtle. 1. Very stretchy membrane material like spandex. 2. Material that progressively gets thinner towards the centre. 3. Several layered membranes with holes/apertures in the centre getting progressively smaller. 4. Membrane material with a low elastic limit, so that it plastically deforms? Like bread dough. 5. By heating a piece of plastic more in the centre than at the edge (think vacuum formed plastic). 6. Fill membrane with varying densities of material, more dense in the middle (pitch or sand?), lighter material at the rim (oil?). Oil and water can self separate due to their densities, so maybe that mechanism can be used to get the shape you want.

I think you'd get a smoother finish if you do a gel coat. Vacuum the resin to get air bubbles out. Pour resin like you did in the center but don't touch it. Let it spread thin and let it set up until hard but still a little tacky and then put some layers of fiberglass as you did. It should be super smooth.

@naughtyboys2381

Жыл бұрын

I think it would be more accurate if the resin is poured first and then inflated the parabola?

A really beautifully made documentary!

awesome transparency in you stating how much Rayton/CrowdfundX paid you! Very admirable!

Spinning a fluid or liquid in a round flat container will cause the liquid or fluid to form a Parabolic shape If you use resin once it hardens you have a perfect Parabolic shape or you can use large amount of mercury to make a telescope mirror as long as you keep it spinning. I have used this in making telescope mirrors in a glass furnace to cut down the grinding of mirror for telescopes.

@benoit8850

4 жыл бұрын

Was going to comment this. Make a mold from concrete spinning in a round container

Alternative: A "rotating liquid-metal mirror" automatically makes a perfect parabola, but only while it's spinning. If you instead spin resin (or molten glass or molten aluminum) until it hardens, you've made a smooth parabolic surface (which then must be "corrected" if necessary, polished, and possibly plated with reflective metal). You have to spin a "pan" that closely approximates the paraboloid you want (CNC cut or 3-D printed); the more it departs from perfect, the more liquid you need to cover it. (If the resin floats on water, maybe you could use a plain cylindrical vessel filled with water as the parabolic "pan".) Problems: Air currents could make the parabola slightly imperfect. When the rotation stops, centrifugal force stops, and the shape will change very slightly. Dust, etc can settle on the resin while it hardens.

@my_dear_friend_

10 ай бұрын

Mercury ought to work. :)

@qazmatron

10 ай бұрын

A working liquid-mirror telescope *(mercury)* was built in 1872, when mechanical engineering became good enough to maintain the required constant rotation speed. I remember reading that the ground vibration from a horse and carriage passing nearby was enough to degrade the image because they didn't have air bearings for maximum isolation. Rotating mercury mirrors were used even in the 2010s, and some are planned.

@my_dear_friend_

10 ай бұрын

@@qazmatron - And again, I am too late. :) Interesting to know about the use of mercury for that purpose. Thanks for sharing.

@A.Netizen.Since.2010

5 ай бұрын

​@@my_dear_friend_ ..But isn't Mercury highly poisonous ?

@my_dear_friend_

5 ай бұрын

@@A.Netizen.Since.2010 - Very much so.

This is very cool. This at least has convinced me to try it on my own. 👏👏🤓 Really great DIY !! 👌

Really liked the concept and effort

My thought would be to make it as a vacuum system -- build the frame, seal it up, add mylar, then pull a vacuum to get an adjustable focal length. The pressure would keep the shape.

@j.g.campbell3440

7 жыл бұрын

You wouldn't be able to cover the back side of the mirror . It would be inside the vacuum chamber.

@frollard

7 жыл бұрын

imagine if you will...a vacuum is pulled inside a bucket with a mylar surface sealed over the opening...

@frollard

7 жыл бұрын

double post: and you keep the vacuum to keep the shape. If you want to change focus you change the pressure.

@JMP_2203

7 жыл бұрын

I believe that is the basic process for how some telescope mirrors are made.

@jonathanlange1339

6 жыл бұрын

Very good idea!

When you look into the mylar and see your reflection, is the image crystal clear like it is in your bathroom mirror? If there's any fuzziness at all, then it really won't be suitable as a telescope mirror. Furthermore, the tolerances required for the paraboloid shape are tight in order to get a clear image. But don't despair -- there are other good uses for an approximate paraboloid -- like the solar cooker you've shown. I know that -- in theory -- rotating a shallow dish of liquid will generate a parabolic shape, but the liquid needs to have viscosity high enough to damp out waves and turbulence, and you'd probably need to run it for a while until the final shape is stable. I wondered if a long-curing syrup-like 2-part epoxy, rotating in a shallow dish would solidify into a nice parabolic shape. This could then be used to (1) make a long-distance acoustic spying device or (2) serve as a template for making parabolic surfaces via vacuum forming hot thin plastic sheet.

Dude, yes! Thank you for sharing.

Parabolic dish making very easy to showing.I love and thanks this video

I know this is a very old vid, but this is a thought experiment I run in my head, ad infinitum: How to make a big mirror for a Dobsonian telescope. There was an article in Popular Science, I believe, which had a great method -- basically a 15"-20" bowl, on an old record turntable with the central spindle removed, filled with very slow setting epoxy. And set the whole thing up on some foam in a place far from traffic or other vibrations. It creates a parabolic surface, the focal distance determined by the RPMs of the turntable. But you still have to send out for silvering. I love to think on ways to achieve such a surface myself. This is a clever solution, I wonder how I could manipulate a space blanket to work with an existing parabolic form?

@tomsuit124

3 жыл бұрын

A telescope mirror has a surface figure that must be accurate to a fraction of a wavelength of light. Given that, the approach of using mylar has a lot of challenges that might be insurmountable. The main one I see is that it's soft so it will deform due to uneven weight of the fiberglass. That will create zones (visible in the video). Secondly, the fabric of the fiberglass will print through. Thirdly, I don't know how smooth the surface of the mylar sheet is so even with a perfect figure there will be a lot of scattering. I think flipping it upside down (concave side up) and displacing a liquid epoxy like you mentioned would be a better approach. you would need a machined ring at the edges to prevent distortions at the edge. You can see some of those in the video. For a solar furnace this thing is brilliant! (Couldn't resist)

@buddyblock3755

2 жыл бұрын

chrome paint

Interesting. I was thinking of using a space blanket for a box solar oven. Looks like it will work.

You certainly fired my imagination awesome demonstration thanks!

Nice I've used this polyester to reflect sunlight off of windows for years I knew this material was good thank you thank you thank you

“A weight from my work bench” *slaps a brake drum on top of it* 😂

@peety6333

4 жыл бұрын

He he he

Have you gotten anywhere with the use of one as a telescope mirror? That will be tougher of course, but this is seriously interesting. I've made a number of mirros for telescopes and there are some very different designs, like spherical mirros that are pulled into a parabola with a bolt on the bottom. Anyhow, good luck, and I'll be checking back to see your progress. In the meantime think relatively large in diameter, and short in focal length. Both will make for a mirror that doesn't need quite as high quality.

@Nighthawkinlight

7 жыл бұрын

I haven't progressed on this experiment since this video, too busy with other projects. I have plans to get back to it next spring if I can. Lots of ideas to test

@GlutenEruption

7 жыл бұрын

The easiest way to do that would be to use something like what he used to draw his circle, stretch Mylar tight over that, and then pull a vacuum on it. That's the method used on some actual telescopes and since you are using air pressure which is completely even over the surface, it will come out perfect

@Berkana

7 жыл бұрын

This mirror is not usable as a telescope mirror because it isn't a parabola; any mirror produced by air pressure against a membrane will be spherical in shape, not parabolic. (Think of a soap bubble as an example of a membrane resisting air pressure. It forms a sphere.) This is space blanket mirror is just a segment of a sphere.

@kyd1972

6 жыл бұрын

+Berkana, yes. Exactly. Thank you for posting this reply.

@garyhunt5845

5 жыл бұрын

@@Nighthawkinlight Have you had a chance to progress further on your astronomical telescope convex mirror? I agree with some of the comments about the correct curvature... this may require a way of monitoring the degree of curvature to achieve the correct focus angle for the telescope you need it for? Not being a very practical guy... it would be great to see an innovator like yourself come up with the solutions before I get my hands dirty!😆 Happy New Year (2019) by the way!

Wow, Super!! Smart moves! Trial and error with the right state of mind

The light rays coming down onto that mirror in a cone shape is so beautiful.

@philiplindquist87

3 жыл бұрын

The cone shape is not coming down, it is of course, the reflected light going up to the focal point and beyond.

I've made a parabolic solar reflector. Just uploaded the video on KZread. thank you

@ronaldvankuyk908

2 жыл бұрын

Gold foil emercy blankets reflect infr red heat better ronadam

And the neighbors say: NightHawk is signaling his mother ship again.

Great job man, very inspiring, thanks a lot!

I'M Very impressed cant wait for a telescope video!

Two things, 1) I have used a solar blanket to shield the sun from south- facing apartments that were experiencing oven- like temperatures unless the air conditioning was on continuously. When stretched tightly over the window, you could see outside perfectly like through mirrored sunglasses. The Mylar film was allowing about 30% of the light through, not the best thing for solar concentration, but I am impressed how it does work in your video. Thin aluminum foil reflects 100% of the light... Could this idea be revisited using this instead? Where can you get a wide enough roll? With the same bonding process to fiberglass, the fragile foil would become a strong structure. 2) With this process, the shape created would not be a parabola, it would be more like the a section of the edge of a balloon, spherical in shape, good enough for the purpose, but less than perfect. Try as you might, but I doubt you get an optical surface that would work for a telescope... What DID work was a spinning dish with reflective mercury placed in it, the liquid automatically forms a perfect parabola, whose curve depends on the speed at which it is spun, but it is obviously constrained to only being able to point straight up... Hmmm, any way this could be used with an epoxy type liquid that is spun until it sets?

@stargazer7644

Жыл бұрын

Thats exactly how they make very large (8 meter) telescope mirrors. They melt glass and very, very slowly let it cool while spinning it. It takes a couple months.

What if you used the dish from a satellite tv antenna? It would make a nice rigid form too. Aren't satellite dishes true parabolas? I could be wrong about that though.

@namibjDerEchte

7 жыл бұрын

They are good and rigid, but expensive.

@Wanderlust1972

7 жыл бұрын

people toss those daily

@mute8s

7 жыл бұрын

zasabiibasaz my thoughts exactly. :)

@namibjDerEchte

7 жыл бұрын

mute8s Yes, you should be able to use a sattelite dish. I just meant it would likely be cheaper to build them his way, if you want to have a lot of them.

@pixelmaniac8534

7 жыл бұрын

Not to mention this process stretches the creases away to make a much smoother finish.

Bro thanks. I saw someone may be you, that did something similar but put the blanket on a frame and did a vacuum Blessings, I like the video a lot

I liked the way you tried making another attempt ......after a lot of hardwork 👍☺️☺️☺️

Hmm, wouldn't inflation create something approaching a spherical shape rather than parabolic? Obviously not in this case but I would love to know why. Also, if this is anything like using gravity to make a parabola what it actually makes is a catenary which would be fine for solar but probs wouldn't work for telescopes.

@martynh5410

3 жыл бұрын

I agree with you. This is a great way to make a reflector for solar use but it won’t be a parabola and even if it was a parabola, it’s never going to be smooth to a 1/4 wave (some mirrors for astronomy telescopes are 1/10 wave).

@wictimovgovonca320

3 жыл бұрын

This technique has been used for decades by amateur radio operators to make "parabolic" reflectors for antennas. There the tolerances are not as critical as the wavelengths are relatively large. I don't think a telescope is possible as you would want a fraction of a very small wavelength (good optical mirrors are about 1/10 wavelength). For concentrating sunlight however, this is a good compromise. We can start a fire with a small magnifying glass, so a 3'mirror should be good enough even though it does not have pinpoint focus

@davesmith9325

2 жыл бұрын

I also think it's not a parabola. A parabola has the sharpest curve at the centre, I suspect this has the sharpest curve at the edge ?. It should be easy enough to Ray trace it and discover its coma ?

@Erikkaa7

2 жыл бұрын

Mirors for astronomy are incredibly difficult to make. They must be perfect to the micron. It's why they are so expensive to produce. This is Definitly a wonderful projet for solar cooker, long range micro or wifi. With old recycled satellit parabola this technique could probably work. It reminds me i have to repair my bicycle tire :-)

The Brain: "I shall make one the size of the moon & finally conquer Earth!" Pinky: "I'm hungry & we're out of cheese."

@V.Z.69

4 жыл бұрын

Mirascope, concave reflections at a VERY far distance... sees a map in the sky at high contrast... let's call it moon. Present day, look at the "moon". But it's still the map reflected in the sky. Yes.

@mikeriley9915

3 жыл бұрын

Lol great one

Wow, that's amazing and fun to watch!

Dude you got me hooked with starlight.... now this? Amazing👍👍👍👍👍

Next video - make it heat water in copper pipes and make it rotating, to falllow the sun with arduino.

@TheBackyardScientist

7 жыл бұрын

Easier to use black hose :p

@MasterBlaster110

7 жыл бұрын

you don't need an arduino, you just need a cross made from small solar cells which is attached to the mirror. the solar cell outputs are crosswired to the DC tracking motors and the cross is mounted in a way that the sun isn't shining at the solar cell faces but at the edges. :)

@MasterBlaster110

7 жыл бұрын

it's almost stupidly simple. no electronics needed at all, not even a battery or power supply!

@AAA-bo1uo

7 жыл бұрын

you won't need copper pipes mate.. just get half a barrel, fill with water and aim the lens at near bottom, make sure your barrel can breath a bit.. wont take long and it doesn't need to follow the sun, 1 good hour is more than enough.. this thing can melt metal in not a very long time, water would be stopping your barrel from melting. whwre i am, we don't have electricity so we made 1/4 of a barrel (cut a barrel down and welded it) and connected it to my water tank, i heat water using wood or gas (mainly wood), but those can get expensive.. i need one of these lenses or anything that can focus a big area somehow, those blankets aren't available here. glass is out of the question.. i tend to use a 10m black 1/4 inch garden hose for showering, but you cant make everyone shower with that alone.. need something bigger for the house..

@misaalanshori

7 жыл бұрын

+AA A if you dont have electricity, how did you comment this?

Time to get six of these, an old crt screen and do some careful math and finally build that heat/death ray I've been wanting to take over the world

@auxilator1939

4 жыл бұрын

you best finish before night time if you want to get anything done

Great job, indeed!!! Cogratulations.

Using a high density closed cell polyurethane pour foam works great for me too. Doesn't require any extra reinforcement.

5:00 Feels like those Ohm's eyes from Nausicaä of the Valley of the Wind...

You are amazing brother. My highest respect!

Green Power Science , Dan, did a similar project years ago. A practical application is for a long distance laser communicator collector-receiver with the light sensor at the focus area. Thumbs up, nice construction methods.

Thank you for a most interesting video! However: by this method, in 3-D mathematical terms of space geometry, will the outcome be a paraboloid, or rather part of a sphere? Have you compared the longitudinal section to the contours of a parabola cut out of cardboard, to see whether the surface aligns with the mathematical ideal?

@sdnlawrence5640

2 жыл бұрын

That's exactly what I said, but then I passed out, woke up with a hangover and slipped in the shower so I forgot to post it first.

NEXT DO FRESNEL LENS PLEASE

@Nighthawkinlight

7 жыл бұрын

What would you like to see with a fresnel lens?

@pbpbpbpbpbpbpbpbpb

7 жыл бұрын

I guess burn stuff

@LeonardGreenpaw

7 жыл бұрын

NightHawkInLight How to make one cheaply and as easy as this!

@pbpbpbpbpbpbpbpbpb

7 жыл бұрын

Yeah that would be awesome, but quite challenging as well, I guess

@Nighthawkinlight

7 жыл бұрын

That would be really difficult. You can buy them though on ebay or amazon in a 5 pack for like $12

This really showcases your genius.

very well made video. i agree with Applied Science. i wanted to make one, but didn't know where to start. Now I do. Thank you.

Here is a great improvement idea for your manufacturing process. Use Rubber Cement on the PVC board then layout your space blanket over this, but before inflating it apply Epoxy to your backing ring, set it in place over the space blanket, clamp the ring down lightly enough to allow it to add pressure through to the rubber cement between the PVC sheet and the space blanket, Now apply pressure to the valve stem and create the dome, apply the Fiberglass shell inside the ring and allow this to dry while keeping the air pressure on the valve stem. And I would mount a pipe fitting here instead and attach it to a 5 gallon pressure tank and adjust the output pressure to about 10 lbs., If there are no leaks it will maintain the same pressure to the sheet the entire time while it dries.