it could have been better if you showed how to wire all the stuff because most people have never done this before. But overall good job

Can you do a full build tutorial? Or at least a more in depth video?

you are a genius! it looks exactly like an original onewheel.

Absolutely amazing!

So skillfull and creative! Could be a great way to introduce friends or family to the onewheel world, with this as a 2nd board 🙌

@pnoybiritph3993

3 жыл бұрын

You bet

Thanks a lot! I was looking forward to this video

Looks really professional!👍🏻 Nice Work

@pnoybiritph3993

3 жыл бұрын

Thanks

thanks for posting this , i am working on this project now. excited to ride

@pnoybiritph3993

3 жыл бұрын

No problem.

@j.a.n1615

3 жыл бұрын

sir max range mo po sa stock battery?

@pnoybiritph3993

3 жыл бұрын

@@j.a.n1615 11 miles sa flat at depende rin sa battery. Gamit ko samsung

@j.a.n1615

3 жыл бұрын

@@pnoybiritph3993 ahh salamat po

Congratulations, great job! could you explain to me how you connected the two motherboard outputs to the single gyro? I have cables with a different color and I used the position of the pins as a reference. Thank you.

Great videoo 🎉 also we are trying to build one.. can you tell us what size of bolt did u use for joining both motors.. didn't the bolthead obstructed motor coil?

Amazing job :)

Awesome, fair play to you! My friend built his own XR-style one wheel. It's what got me into one wheel. His also has a problem with no pushback, he has fallen a few times. Let me know if you manage to fix the pushback, my friend would be grateful! Happy riding

@pnoybiritph3993

3 жыл бұрын

Once you got used to it, pushback not even matter and i had this front roller also to prevent me front nose diving. Other than that, feels like the real one.

How's the seal between the rim/motor, tube and tire? Is it like a beadlock setup?

Hi what is that on your gyroscope? Right next to where you soldered on the sensor on the gyroscope board I see another little sister board soldered onto the four-prong connector?

I am curious if you still ride your DIY hoverboard? How fast can it go? Nice build by the way

can I pay you to make me one ?? I would love to have one of these home made versions...im so impressed at your genius

Great, that's what I was waiting for!

Good

what did you use for a bottom panel to hold the electronics, wood or did the xr body come with something to hold it?

@pnoybiritph3993

3 жыл бұрын

Wood to hold the battery, motherboard, and sensor with aluminum underneath the wood for protection from heavy impact

Awesome dude! I I was just hatching this idea until I went to KZread😹 Why do we need positive and negative platforms? how are they connected to the motherboard? thanks ✌️

@pnoybiritph3993

3 жыл бұрын

For foot sensor to activate it. Or the one you saw from + - connection are the 12v supply for led lights

@ksavchenko

3 жыл бұрын

@@pnoybiritph3993 thanks 👍😀

Hey great job!! I go to make one like yours, but I have a question. What size were the wheels of your hoverboard? I was looking for info, and I saw 3 sizes 6.5, 8 and 10. I guess that's the entire wheel size, but maybe one of this sizes is the perfect size for the project?

@pnoybiritph3993

3 жыл бұрын

6.5. But the wheel base size is about 5’in.

@Kitesurferos

3 жыл бұрын

Thanks!!

@Kitesurferos

3 жыл бұрын

Sorry, I found a 360W Nilox DOC hoverboard, the wheels size is 5.3, but I'm doubting about the Watts.

@pnoybiritph3993

3 жыл бұрын

@@Kitesurferos i think that’s the total wattage of two motors 360 wtts. You have to get those 700 watts total for two motors. Before you buy, check for the hoverboard spec, some hoverboard has 24v and you have to get the 36v with 350wtts in each wheel with total power of 700wtt.

Truly amazing! Comparing this one that you made and the real Onewheel, what are the main differences that you felt riding both ?

@pnoybiritph3993

3 жыл бұрын

No pushback. But when cruising @ 10mph, there’s no big difference as it ride. Curving, turning and etc.

@HimSkim

3 жыл бұрын

@@pnoybiritph3993 i would love to try it, this video tempts me to do one too, nice job!

@pnoybiritph3993

3 жыл бұрын

@@HimSkim go for it, you wouldn’t regret it because you would love your own work and be proud.

nice job ! what's your maximum speed ? do you have an idea to upgrade the motherboard ?

@pnoybiritph3993

3 жыл бұрын

I did test speed on this and it was reading on gps at 36 kph. There is a website hack for this kind of motherboard but I wouldn’t go for that upgrade yet. I was doing some research about how im going to add pushback feature since it’s scary to ride when you push it to the limit. But now, im enjoying riding at my cruising speed @ 10-14mph.

Hello, i connected two 6.5" engines together and now i have dimensions 4.13-4.8 inches, and your tire is bigger - 6.00-5. it's almost 2 inches wider and inner 0.2 inches bigger. How did you fit that?

@Fast_Roy

5 ай бұрын

What did you do

Nice hack!

can you make an Instructables plz

Nice work what’s the range, and top speed? Think of a name yet? Maybe a huh-?-wheel

@pnoybiritph3993

2 жыл бұрын

Top speed is depending on weight of the rider but i was getting 12 mph at cruising speed. More than that it will be dangerous.

How were you able to get both motors to turn in the same direction? I switched two of my leads on one of the motors thinking it would rotate the opposite directions but it just made vibrating noises and didn't move. Sweet video tho!

@pnoybiritph3993

3 жыл бұрын

Rearrange the wires from the other motor. Check my other video

@Nick-xs9zu

2 жыл бұрын

I have the same issues

@Nick-xs9zu

2 жыл бұрын

@@pnoybiritph3993 when I try the same thing will happen just with the other motor

@LauriraYT

2 жыл бұрын

Hall sensor cables need to be rearranged, each motor had differently colored cables: what you need to do is swap the pins for the two outermost hall sensors. The wires for the 2 attach to the motor board around the same place as the connections of the sensors.

The 2 hall sensor of the motor connected or 1 ? Thanks

@pnoybiritph3993

3 жыл бұрын

Only one side of the motor need to rewire for you to able to match the turning direction of the other motor.

@abdounet8194

3 жыл бұрын

@@pnoybiritph3993 thanks you

I wish I could make one

Hey, great job! Real nice work. I'm building one exactly like yours from your video and have a question if you don't mind. The 2 gyro boards that are wired together is that really necessary or could you also use only one gyro? I was thinking that as now there are potentially two different outputs of the gyro right? Or do they combine into one signal for both motors? Also how did you layout the gyros on the footboard? I couldn't tell from your picture. Are they flat on the wood as well or on the inside the rail? Are they front-to-front, back-to-back or back-to-front (if it even matters). I'm more of a wood-working guy so the electronics confuse me a bit. Appreciate the help if you have the time. Keep up the great the projects!

@billygrimes213

3 жыл бұрын

You use only 1 gyro, wire it's output to both motors. That way they are in sync.

How the hoverboard you will get bro pls tell me

Does it need to be 36v 350w (700w total)? Would a 36v 250 watt (500 watt total) work?

@pnoybiritph3993

3 жыл бұрын

I think it works too, as long as it does have the 3 boards which is the 2 gyro sensors and the motherboard. But mostly, those 250watts are only comes with 2 gyros and you can’t use that before it doesn’t have the switch. Because you are going to need that for foot switch.

@pnoybiritph3993

3 жыл бұрын

@@williamlivingston2929 let me know if i can help.

Awesome vid, I’m starting mine soon. Quick question, after you joined the motor hubs together and put it in the tire with the tube what’s on the outside holding everything in? It looks like a custom hubcap or something, where did you get that?

@rossdrooger3036

3 жыл бұрын

Also I can’t find a hover board anywhere that’s 6.5inch wheels that has 2 350w motors. What brand and model did you use?! Thanks!

@pnoybiritph3993

3 жыл бұрын

36v hoverboard are 350 wtts each motor. There are sticker underneath the hoverboard which tells you the battery voltage. Once you bolt on the two hubs, you will need to shave the middle wall so you can insert the tire. And the outside holding the tire are the motor cover. Check my other video in the beginning of this project.

@rossdrooger3036

3 жыл бұрын

Awesome I’ll take a look. So all the 36v hoverboards are 350w? Or are you talking about a certain brand and model hoverboard?

@pnoybiritph3993

3 жыл бұрын

@@rossdrooger3036 I assumed all the 36v with 4.4 amp are rated to 350wtts motor. When i started this project, I didn’t know that there are so many 24v also which rated to 250wtts which is too weak to start. I found that the 36v 4.4amp are basically 350watts motor. You just need to look for spec specially the the amp of the battery.

@rossdrooger3036

3 жыл бұрын

Thanks man, just ordered one! One step closer

I dont really understand where you plugged in the pressure pad /great video btw

@pnoybiritph3993

3 жыл бұрын

From the photo sensor of the gyro board - +.

This looks really great ! Sadly I don't have dremel. ^^

wow thats cool. how does it compare to a real xr

Can you do custom ride shaping and use the onewheel app though...? Ill stick to riding my XR lol. Cool idea and video though.

@pnoybiritph3993

3 жыл бұрын

No, but this actually have a custom normal and fast mode switch but not through app. Thanks for the comment

What's the point of rewireing the hub? Just plug it in the right connector? Or do you need to change anything else? My Colors are different then yours

Could you make more and sell plz

On the 2 giros, what wires do you join together it's hard to see on the video??

@pnoybiritph3993

3 жыл бұрын

The two middle wires.

@youngy7449

3 жыл бұрын

@@pnoybiritph3993 thanks 👍😉

@youngy7449

3 жыл бұрын

@@pnoybiritph3993 when you say the middle 2 do you mean the same colours??

@pnoybiritph3993

3 жыл бұрын

@@youngy7449 join the two wires in the same sequence number. The middle two wires number 2 and 3 has to be the same position. So, join the number 1 gyro ( wire # 2 and 3) into number 2 gyro (wire #2 and 3) Sometimes, the color aren’t the same as the first gyro.

@youngy7449

3 жыл бұрын

@@pnoybiritph3993 thank you, I will try out later 👍

Hay I'm making onewheel and I would like to Ask if its 6,5" good for wheel size of motors

@pnoybiritph3993

2 жыл бұрын

Nope, 6.5 is big but with 3D print insert would do it.

@laindustries992

2 жыл бұрын

@@pnoybiritph3993 how you mean that

What do the measurements "1 1/2 x 1 x 1" mean for the rail pieces mean?

@pnoybiritph3993

3 жыл бұрын

It depends on how wide and how long is your footpad. If you are going to use the onewheel xr bumper, I suggest that you need to install the wheel with tire in the rail and do the measurement. So you know how far is the wheel and bumper from each other before you cut the desire length of the rails.

@jamesmagnusson8248

3 жыл бұрын

@@pnoybiritph3993 I meant what part of the rail pieces does each number represent? Like what part of the c-channel rail is 1 1/2? Also, what kind of range are you getting out of this thing?

@pnoybiritph3993

3 жыл бұрын

@@jamesmagnusson8248 1 1/2 “height and 1” width top and bottom. The range is about 8-10 miles with 36v samsung battery pack.

Answers every question :)

@pnoybiritph3993

3 жыл бұрын

I’m glad i can help so you can save up to buy an iphone 12

Dude the speed

@pnoybiritph3993

3 жыл бұрын

19 mph

This is great and its so cool you made this but honestly mate, just buy a real one😂 its worth every penny

@pnoybiritph3993

3 жыл бұрын

Your right, but not all human being can afford it.

@oldretireddude

3 жыл бұрын

He obviously already has skills but he's learned something that he previously didn't know in the process here. We should all be doing things like this.

@jasnromig2007

3 жыл бұрын

@@pnoybiritph3993 ya true i can’t believe i scrapped up enough to buy one lol

@pnoybiritph3993

3 жыл бұрын

@@jasnromig2007 it’s all good, i almost bought one when i got a chance to ride it and then tried to make DIY the feeling is almost identical it just the pushback feature aren’t there.

can you please put the link for that hoverboard in the description or in the answer for that comment becouse i have been looking for that hoverboard but i can only find ones for 100 $?

@pnoybiritph3993

3 жыл бұрын

It depends where you from, usually it’s posted on facebook app market, craigslist, OfferUp for really cheap. Goodluck

@patgamer4567

3 жыл бұрын

@@pnoybiritph3993 thanjs But can you put Just the name of that model

@pnoybiritph3993

3 жыл бұрын

@@patgamer4567 the one i got is Lamborghini. But i guess all 36v hoverboard pretty much the same spec.

Hey PinoyBirit! If you're currently in the Philippines and are up for it, would you be down if I send you all the parts and fees and have you build one? I don't mind if it'll take months hehe. Let me know man!

@pnoybiritph3993

3 жыл бұрын

You know what bro, I would love too but I am currently out of Pinas. Maybe when i get back there i will help you. Even if you try to send it to my place it would cost you same as the original onewheel. Wait for my return...

@mqdelros

3 жыл бұрын

@@pnoybiritph3993 Cool, alright bro! No worries at all! Actually if ever you come back and would like to sell me any of the previous prototypes, i would be 100% down for it! If only onewheel opens up here in the PH 😭 mabuhay bro! Stay safe!

What is the hoverboards name?

@pnoybiritph3993

3 жыл бұрын

Ferrari

Where did you find the tire

@pnoybiritph3993

3 жыл бұрын

Ebay

@lloydsicornite6454

3 жыл бұрын

@@pnoybiritph3993 Thank you this is a very cool project.Other people use 3d printed parts but thanks to you my onewheel will be as strong as the original

Put OW outta business??

Hi mate, what’s the hoverboard tire or rim diameter ? Anything else but the 700w total for the motors to consider when buying it ?

@pnoybiritph3993

3 жыл бұрын

700wtts yes, too weak if under that power. Wheel tire is 11/6-5 ( 11’height) (6’ width) (5’ rim diameter) the rim diameter has to be shaved a little for it to fit into the hoverboard rim. Since the hoverboard rim diameter is over 5’ maybe 1/4 more.

@royvelesp

3 жыл бұрын

@@pnoybiritph3993 nice, thanks!! Also for the footpad sensor you put a copper layer which is the positive then a velostat layer (do you only put velostat only on left side as on your video or you need to put it on both sides ? ) then another cooper layer which is negative...solder the wires to positive and negative layer and then those wires go to the Gyro? Can you share me a schematic of this please ?

@royvelesp

3 жыл бұрын

Sorry me again, when you combine the two gyros you also combine positive and negative? or just the middle ones? And once you rewire the gyro you only keep one right? The one you keep is the non battery side?

@pnoybiritph3993

3 жыл бұрын

@@royvelesp No, i’ll will short circuit your gyro. Your other gyro is already running the + - and once you connect the sensor it will also power up the other gyro.

@royvelesp

3 жыл бұрын

@@pnoybiritph3993 Got it Sir, thanks again!

But I dont have any Hoverboard.

How fast is it

@pnoybiritph3993

3 жыл бұрын

18-20mph

When you have too much Time on your hands

@pnoybiritph3993

3 жыл бұрын

LOL..

No Pushback.🆒️🆒️🆒️🆒️🆒️

@edpleijsier

3 жыл бұрын

whats the pushback you all mention?

@trillionaccount1988

3 жыл бұрын

@@edpleijsier pushback is a feature on the Onewheels. If you are going too fast, the board will tilt backwards to let you know.

sir natural lang po ba na medyo uminit yung motor kahit walang nakasakay upon testing?, ok yung ikot nya kaso medyo umiinit pa tulong naman po

@j.a.n1615

3 жыл бұрын

paki sagot naman po tanong ko please

@pnoybiritph3993

3 жыл бұрын

@@j.a.n1615 Sorry bro medyo busy, di siya dapat nag iinit. Make sure to check yung mga wirings mo baka meron nag dikit lalo na sa end ng tube ng motor

@j.a.n1615

3 жыл бұрын

@@pnoybiritph3993 ok na po sir naayos ko na, hinihintay ko nalang yung gulong

@j.a.n1615

3 жыл бұрын

ano ng po pala size ng inner tube nya?

@pnoybiritph3993

3 жыл бұрын

@@j.a.n1615 gamit ko yung 13 in.

Perfect example of how overpriced the real onewheel is.

@justinsmith8099

2 жыл бұрын

I can guarantee you this doesn’t preform any where near what an XR will. Not to mention this isn’t a 100 dollar build you can’t even get a hover board for that.

@Nick-xs9zu

2 жыл бұрын

@@justinsmith8099 i bought 2 working hoverboard voor 45 euro... what you mean you can't buy then just check retail

@justinsmith8099

2 жыл бұрын

@@Nick-xs9zu ok so say you can get a hover board for 50$ which are probably super under powered you would still need to buy the onewheel tire which the cheapest ones I’ve seen cost 89$. All I’m saying is this can not be built for a 100 bucks.

@LauriraYT

2 жыл бұрын

@@justinsmith8099 I’m working on a similar project. I got tires for free from a karting place and a hoverboard used for 25 bucks. I’ve had someone offer me XR bumpers for 15, the rails can’t be extremely expensive either. You really can get this cheap.

A real one wheel goes 15 miles an hour comfortably even faster if you wanted and goes 12 to 18 miles for the XR this probably goes to miles and a max speed of 7 miles an hour and it is a very weak motor it knows dives constantly as you can see in the video I guess you get what you pay for