1dB is not doubling the actual sound energy. Every 6 dB represents a doubling of amplitude, however a better, though also non-exact, rule-of-thumb is that every 10 dB increase is a doubling of perceived loudness.

@jedolivier2688

Жыл бұрын

Actually, for every 3 db increase in sensitivity, it requires have the amount of power, to get the same loudness, & or output.

Thanks for this! My only issue with this speaker so far is the volume steps are just way too steep. It goes from quiet at one level and I turn it up just one more level and it's super loud

@skatemango

Жыл бұрын

Found a few solutions if anyone is struggling with this: First solution was to unlock developer mode on phone and there is an option called "Disable Absolute Volume". This will unlink volume steps of the speaker and phone and allow more volume fine tuning. Second solution is use a phone with more volume steps. Final solution you can adjust the JBL app eq below 0. Hope this helps someone out!

@samypons9023

11 ай бұрын

​@@skatemangofacts thanks

All you did is change the resonant frequency response, the human ear can’t distinguish a db or two. Also your decreasing the cooling of the amp, as that moving air in the chamber helps cool the heat sync.

Wow!! I follow your idea and make this to all my jbl speakers: jbl charge3, flip4 and xtreme2. I didnt have industrial foam, filled with sanitar foam, but wow! What an improvement!! Not specially for overall power, but what I notice wright away was the better overall sound, charge3 became way more crisper! No more muffled sound, is really incredible! No need to use equalizer now. Same improvement to clip4, is not harsh, just clearer and think also a little more powerfull. Is just like a new (better) firmware made. At extreme2 the sound was so obvoius cganged, but is there! Of course we dont have same ears and we have different expentantions from a speaker, but for me was a noticeable improvement, why they dont put foam in speakers in factory? Thanks a lot for this video, yoyu make my day a lot more happy, no need now to upgrade flip4 to flip6, or charge 3 to charge6, the sound now is really nice to old generation! I'm interested more for the sound quality and less for overall power. Respect! :)

Da forma que você fez diminui muito as baixas frequências e deixa a caixa mais plana tirando os ganhos que vem da jbl, que buscam um resposta de frequência em forma de (U) que é a curva de resposta mais agradável para os ouvidos 👂.

The one you have is an ND Model, the TL (TT) is louder than the ND Although the ND has a better bass response than the TL (Because many people preferred this model because of that better bass). And the TL one has good deep bass. But still, both sounded great 👍

@AlexXDIpX7

8 ай бұрын

I have the TT one and I like it as is🙌

Hi dose this make the speaker sound disoriented

I used do this with my car sealed subwoofer box. Not to make it louder, but to lower the bass frequency output. I think you should experiment with how much you wading you put in. As a rule I only used to fill 75% of the cavity, as I found any more than that would make the sound worse.

Im gonna try 🔥

@mmhotdog

2 жыл бұрын

Did it work?

I like my speaker just the way it is

@nutzernutzeramstart2723

Жыл бұрын

0k

@ILikejblcharge5TTLFM

10 ай бұрын

​@@nutzernutzeramstart2723ja

If a 47 ohm series resistor is connected to the speaker, white noise will disappear. 👍😎 ( sound intensity decreases but white noise disappears ) '' Try and see ''😎

How about changing the twitter with driver/speaker? I think charge 3 driver fits 🤔

@S10_Operator

Жыл бұрын

It would sound worse

@samypons9023

11 ай бұрын

​@@S10_Operatoryes definitely

Please what can I do my JBL fliip 5 speaker bass is not working but treble working and what can I do

@shaktastik

10 ай бұрын

Check the wires first make sure they didnt disconnect

Is that gonna be burn when heated for long duration of playing?

Hi there,I get a distortion sound on my JBL charge 5, anything I can do to clear this?

U just can turn up eq in JBL Connect to 1 point on middle and highs.

@Fabiohobby

Жыл бұрын

and is it true that after the update she lost the tombs?

@mykyta_go5hko

Жыл бұрын

@@Fabiohobby I don't know. I'm not using this trash during this year.

Its got prs No need for Foam

and is it true that after the update she lost the tombs?

รุ่นนี้เป็นโมโนหรือสเตอริโอคับ

@shaktastik

2 жыл бұрын

it's 2 channels into one mono drive.

@user-ny9zn4bw8c

2 жыл бұрын

ขอบคุณคับ

I am the guy who likes the sound just the way it is lol....thanks for this video

@shaktastik

Жыл бұрын

😂 thanks for watching :)

Outra coisa! assim você diminui a troca de calor e os componentes internos vão esquentar mais e consequentemente perder potência e consumir mais bateria 🔋.

what magnets are used on neodymium speakers?

@MegaMaxism

Жыл бұрын

Yes

😮Ciao non si daneggia il woofer?

😮Ciao ho fatto la stessa cosa per il jbl go 3😅

Does this not make it hotter

Will it damage

@kimchibro78

2 ай бұрын

Careful putting speaker back inside..try not scuff sides of woofer when putting in.i kinda damaged mine not entirely had GORILLA GLUE ON IT LIL WORKS ...GOOD LUCK 🤞

🇮🇹se uso un pannello insonorizzante? - 🇬🇧 if I use a soundproofing panel?

@shaktastik

Жыл бұрын

Cia 👋 I guess you can let us know if there are any improvements.

I don't care if it's louder, I care if it sounds better. Do you think it sounds better?

Caution fire hazard

good job

How do u take the skin off ? You skipped a step

@shaktastik

Жыл бұрын

Do you mean the front cover? I may have it here kzread.info/dash/bejne/q4B709SFpLu9ZJs.html

Lol or just clean your ears properly😂