Nice job

@CustomKidzCars

5 жыл бұрын

Tx

@samsgarage1716

5 жыл бұрын

Custom Kidz Cars Garage this is my new favorite channel.I just started doing KZread last summer and I like building go karts for my kids.

Great idea.it’s going to make a big difference.

Thanks for the help just lifted a power wheel and lookin for custom wheels this helped a lot

@chrisvandenheuvel6493

2 жыл бұрын

Are there kits available for lifting powerwheels/rollplay rides?

@CustomKidzCars

2 жыл бұрын

Nope, would need to custom build the lift and use tires from a model with larger wheels like the jeep hurricane

Hello from the UK.. Excellent video and thank you for sharing. I'm a fan of your work especially Hellram! I would love to do something similar but there is a lot of work involved. Can you do a how to video on the steering axle. Kid Stance did one but my sons steering rack is different (basic Chinese car) TIA

It came out great man, nice work!

@CustomKidzCars

5 жыл бұрын

TX

@Jblake808

5 жыл бұрын

Np..I love to see great work. Have you done any Ford Raptor wheels?

@CustomKidzCars

5 жыл бұрын

No and that might be problematic as it's a two piece rim

That’s cool

Pretty damn creative I love it👍

I like this video

Hey they look good. I did see when you posted this but only popped back to have a watch... Both of you guys show a hard way, yours was a lot less dangerous! I have knifed my fingers open using a craft knife on plastic. :( Lathe, foamfiller (expanding foam) And PU17. And a 3d printerer..;) I've been doing a CAS system over at my Facebook. (Crash avoidance) hey if you want great cars you've got to protect it.. and the children of course.

Where do you order another set of wheels? I haven’t found much.

Can you make "swangas" ? Lmk if you can and if you sell them, I got you my man 👍🏽

I NEED YOUR HELP PLEASE... just came across your KZread page . WOW absolutely brilliant my daughter is gonna love this routine channel. Ide like to get in touch with u about wheels for my daughter ford ranger wildtrak. Iam from the uk and nobody over here wants to help me. I need new wheels and would really be very grateful if we could have a chat . Thanks

What would you charge to do all four wheels for this same truck? I also thought about trying to mount lawn mower tires and rims in the front and doubled up wheelbarrow tires and rims in back. The problem is the hub that goes into the motors on the back. I thought about having the hub machined or maybe just cutting the plastic one off and bolting to the metal wheels just dont know how well it would hold up

@CustomKidzCars

4 жыл бұрын

U would be adding a ton of rotating mass and the added traction will end up breaking your plastic gears. Like your idea but I would just use the lawn tractor rear axle and make it a torque monster.

Where I can get the 3d print cups ?

How do I contact you about getting a full build

Hey, buddy, tell me about the transmission.

Have you done any EVA tires that are Foam Rubber I recently bought a Toyota Tundra from big toys direct and want to do the cake pan wheels but don’t know the foam rubber is bonded the actual plastic inside and if it is ok to cut a half inch before the foam rubber

@CustomKidzCars

4 жыл бұрын

We have no experience deep dishing the EVA wheels. Pretty sure it is molded onto the rim.

@oneeyemonster3262

4 жыл бұрын

I use 13" dolly wheels ..the bearing's iD is 5/8". ( 5/8" ID tubbing or copper pipe as sleeving..might have to tape a little on orginal shaft to make the sleeving fit snug..but it'll be riding on ball bearings and rubber tires. Just make an adaptor with 1/2 Plywood..so you can easy mount the wheel to it. Cut the slot accordingly to fit the gearbox drive sprocket... Im personally using old electric wheel chair motors...it has wazzooo torque. Just have to removing the rims's bearing..and drill holds to fit the hub... Run it on 8s lipo....I tested it already. It did around 8mph on 90 lb brick of a wheel chair on 10" tires..it'll have plenty of torque to pull 13" wheels on a 35lb toy....10mph there about ( I dont want my kids doing more than 10mph on a TOp heavy toy ( they're just kids)..You can g.et 32-50v go kart ESC for $30-$40... I notice yesterday...WASHING machine gear box with same size shaft as the dolly's Bearing...There's Options...I have wazzooo of Mic stand ( musician)lmao They're just kids..it just has to carry 125...at most.

Do you have a website or contact info. I need a set of these

I had someone approach me wanting to do this. Where did you get the actual rim? He's wanting me to 3d print them

@CustomKidzCars

3 жыл бұрын

Link in the video description. Very first link

@tommymartin364

3 жыл бұрын

@@CustomKidzCars im sorry I saw that after the comment. Thank you though

I have a c7. How and where did you cut the axle.

@CustomKidzCars

5 жыл бұрын

It all depends on what your deep dish is. U need to install the wheels and make note of your setup

Have u thought a bout making a drag car from bottom up with a go kart engine or something

@CustomKidzCars

5 жыл бұрын

we considered it until we realized it would only have forward without adding a massive transmission to gain reverse. We have been wanting to try a peerless transaxle that has gears built in. Stay tunes as you never know what crazy stuff we will do next. Right now with dirt kart season closing in we are working on getting the karts put back together.

Do u make the wheels or can I buy them somewhere

@CustomKidzCars

2 жыл бұрын

We don't make them, we custom order them from 3d prints, his email is in the video.

Do you build wheels and sell them??

@CustomKidzCars

4 жыл бұрын

Sorry we do not. The axle and spindles also need to be customized.

First!!!!

Baby car ghr m banye tu wheel jorny ka tariqa batyi jo mazbot reh wheel

Do you guys sell any wheels?

@CustomKidzCars

5 жыл бұрын

No, u can't just sell rims, you need new axle and spindles too with the deep dish.

@EL_CHIINO

5 жыл бұрын

@@CustomKidzCars do you sell that?? Im working on a Mercedes benz for my son and i would like it to look good for car shows

@CustomKidzCars

5 жыл бұрын

Nope, we would need the car to cut and fit the axle and spindles. We do full builds not parts.

@EL_CHIINO

5 жыл бұрын

@@CustomKidzCars ok thanks

I LIKED ALL YOUR WORK JUST ONE OBSERVATION , WHY DIDN´T REINFORCED THE TIRE? , BECAUSE WEIGHT´S KID TIRE COULD RESULT DAMAGED

@CustomKidzCars

2 жыл бұрын

These fat dadio cake pans are super thick. In all honesty these deep dish pans are more or a show car look and not meant to be daily driver wheels. My kids liked to drift and wore out tires in two days, lol. Thanks for watching.

What's the point?

@CustomKidzCars

3 жыл бұрын

Custom look and can match the wheel design of your full scale ride.

I dont hv all those tools sounds complicated

@CustomKidzCars

3 жыл бұрын

It is a more advanced mod for sure.