Definitely something I'll be doing. Thanks for the video.

@AndyKruseChannel

Жыл бұрын

No problem! 😁

I just got my t-shirt today as I wanted to help support you, I have to say it's actually really nice quality and good fit has a good length. If anyone is worried it's cheap it's not. Very happy thanks 🙏

@AndyKruseChannel

Жыл бұрын

Much appreciated!

Excellent video just what I needed this week what I am doing on my car thanks Andy great job.

@AndyKruseChannel

Жыл бұрын

Awesome, glad to help. :)

Looks neat. Cleaned up ready good

@AndyKruseChannel

Жыл бұрын

Thanks!

Dude, that turned out very nice! Love your car!

@AndyKruseChannel

Жыл бұрын

Thank you! Cheers!

Nice project. Really helps clean up the engine bay!

@AndyKruseChannel

Жыл бұрын

Yes it does, I really love these new plug wire holders, it's so much better. :)

These are so entertaining and informative to a beginner like me! I wished there was as detailed and informative videos about the 200 ci i6 since that's what's in my Mustang. Keep up the good work man!

@AndyKruseChannel

Жыл бұрын

Glad you enjoyed it!

I did the same thing using my Taylor wires when I switched out my distributor. Like you I had one of my firing order on the opposite side of the distributor, luckily I was able to rotate the plug end so that they weren't laying on top of each other. I also have a couple sets of the Billet Specialties wire holders, but have not used them yet until the next time I redo my wires and get the 9mm thick wires for a better fit like you've suggested. Car looks go too!

@AndyKruseChannel

Жыл бұрын

Thanks!! I tried the 8.5mm wires that were on the car before I did this upgrade and they moved around too much inside the wire holder, so the 9mm wires are definitely the way to go. :)

It does look cleaner. Well done.

@AndyKruseChannel

Жыл бұрын

Thanks 👍

Looks good bud

@AndyKruseChannel

Жыл бұрын

Thanks!

Those separators are pretty slick. I’ve never seen them before.

@AndyKruseChannel

Жыл бұрын

Yeah, I was pretty pumped when I saw them on another engine, I knew this was the answer I was looking for. :)

Car looks awesome! You have done a great job. Those wore separators are sweet! I think Collins car needs some.

@AndyKruseChannel

Жыл бұрын

I couldn't agree more, as long as it doesn't make his car faster than mine. :)

That engine looks so damn beautiful!

@AndyKruseChannel

Жыл бұрын

Haha, thanks. I've still got a ways to go, but there was a time where I thought I'd never get this far.

You have the 351w firing order now. Wires look great, I will be ordering the seat track extensions soon!

@AndyKruseChannel

Жыл бұрын

Thanks! I've got a set of the tracks waiting for you, just hit the go button! :)

@mrbonafied78

Жыл бұрын

Just purchased😀

Andy, consider putting DEI spark plug boot protectors on to protect the boots from the heat from the headers !

@AndyKruseChannel

Жыл бұрын

They're already on my list. :)

Another great video. I've been wanting to do the exact same thing for a while. Thanks for making it. Nice and clear and no non sense. Just straight good info and nice camera work too. BTW...how were you able to get rid of your old coupe for a fastback in the same color scheme ? Also, how do you like the 347 so far. Looks sweet !

@AndyKruseChannel

Жыл бұрын

Thanks! It was purely coincidence that both cars were the same paint scheme. I like these colors (well, actually the real white and blue, nut the colors the previous owner painted the Fastback), but I wasn't specifically looking for white and blue. In fact, at the time, I was ok with just about any color because most of the cars available were either above my budget or already sold by the time I called about the car. I had to take what I could get, and that included driving 1800 miles to get this one. The 347 is amazing. Spoiler, next Thursday's video is not in my garage. Wink Wink.

Great job! I'll be ordering those wire holders for my 347! Hey, what engine bay paint did you use? I like the semi-gloss look. Not too flat or to shiny. THANKS!

@AndyKruseChannel

Жыл бұрын

Yeah, these wire holders are fantastic! You're not going to like the answer on the paint..... it's just a Rustoleum 2X Paint and Primer, rattle can job. :)

Hello been watching and saving a lot of your videos and I had a question where did you get those spark plug wires holders? Could you be kind enough to let me know when you have time thanks.

@AndyKruseChannel

Жыл бұрын

Awesome, I'm glad you're here! Those plug wire holders are from Billet Specialties. I paid about $120 for the pieces you see, so they're pricey, but they look and work amazingly! :)

Damn I hope there is a way for me to organize my i6 engine bay like this!

@AndyKruseChannel

3 ай бұрын

Thanks! It seems overwhelming at first, but you gotta just keep chipping away at it. This is what I envisioned when I bought the car, but there were times back then when I'd look at my engine bay and think it was never going to happen, too much to do. :)

I was just thinking about making my own sparkplug wires for my 289, perfect timing for your video to come out haha. Have you looked into the ZRay Engine Crossmember that ties into the lower control arms? Just got mine in yesterday.

@AndyKruseChannel

Жыл бұрын

Yes, I have seen that crossmember, but I haven't decided on which route I want to go with the crossmember, yet. :)

@brandonduke1903

Жыл бұрын

@@AndyKruseChannel Are there other similar or better options? I already had a 3 inch plate I was going to weld to the stock crossmember, but when I saw his attaches to the lower arms as well, I bought the normal one from ZRay and welded the plate to his crossmember. I plan on painting the circle bright red or yellow to make it easier to see as my oil pan is black too.

@AndyKruseChannel

Жыл бұрын

@@brandonduke1903 There are other bars out there, but honestly it's lower on my list, so I'm not digging into which options I ultimately want to go with.

andy, did you haver to run a wire for you coil wire? if so where do i run mine for a constant 12V please help

@AndyKruseChannel

11 ай бұрын

Not sure what you mean by running a wire for my coil wire?

@DieselRC

11 ай бұрын

@@AndyKruseChannel the ignition wire mustangs have a resister witch takes voltage away

@AndyKruseChannel

11 ай бұрын

Yes, that's how I understand it. But what I am not understanding is are you trying to find that resistor wire? Or are you trying to do something different? This video is about making custom length spark plug wires and you're asking about a 12V source for the coil? This is where I am getting confused. :)

Should have kept the valve cover studs. Just put the retainer over the original nut and add another nut. Then again, I sold my project Mustang 15+ years ago....

@AndyKruseChannel

Жыл бұрын

I thought about that, but they aren't long enough.

You might want to careful about running the 5 and 6 cylinder wires paralel right next to each other because of the firing order. You could have cross firing between the cylinders. On 289s the two to be careful about are cylinders 7 and 8. All of the Ford manuals warn about this happening.

@AndyKruseChannel

Жыл бұрын

Thanks for the heads up.

@Mike2Pin

Жыл бұрын

That is true, but at the same time he's also running a lot thicker (insulated) wire so it shouldn't (not that it can't).

@luckyluciano4968

Жыл бұрын

@@AndyKruseChannel Guido here. I like your throttle rod from carb to pedal assembly arm. What brand is it. Or is that custom. Do you sell them. Thanks.

@AndyKruseChannel

Жыл бұрын

@@luckyluciano4968 It's a custom piece I made a while back (made a video on it too). I have been thinking about selling a custom throttle linkage piece, but I haven't finished all the design work yet. :)

@luckyluciano4968

Жыл бұрын

@@AndyKruseChannel I have been on many mustang pages. A lot of guys getting frustrated with the old rod. If you make me one. I will be your first customer 👍🏼 and help promote them on other pages. . Other cats are buying these Scott drake pieces not so great. I dint know how to upload a pic to you of my current set up. 🤷🏽‍♂️

I am fighting the same ugly wire thing with my 347 in my 67...

@AndyKruseChannel

Жыл бұрын

Great, so now we know what to do with it. :)

That engine bay is a work of art.

@AndyKruseChannel

Жыл бұрын

Thanks!