Here’s our Etsy shop DISCOUNT link - www.etsy.com/shop/HappyDottingCompany?coupon=KZread Popular casting powders include Hydrocal powders (Hydrocal is mainly composed of plaster of Paris and a small amount of Portland cement) and Dental stone plaster, however many casting powders work well. Here’s a KZread link for casting - kzread.info/dash/bejne/ka57zrNtl6Saes4.html

This helps so much! I had never thought about mixing with a gloved hand, that may make a huge difference in the bubbles I'm getting along with using surfactant. Thank you so much!

I just ordered my moulds. Can't wait. Thank you :)

Hi Anjela, Sandra from the USA...I cast my first 4 molds today using your products...You would be so proud. They came out great. Smooth as can be I can't wait to get painting.Thanks for sharing. Excellent product I will use over and over again.

I’m so glad you provided the discount code to your Facebook group. I just placed my order. Thank you! Happy dotting everyone!

We just received our molds from Happy Dotting Company. The rocks are so beautiful. Thank you so much 😊 💖

Thanks for teaching how to make the stones. I just recieved my mold kit. Thank you for packaging them carefully. Quick delivery. I am so very excited to get started.🖌👩‍🎨🎨🍀🌷💖🦓🇺🇸🤩

Dear Anjela and everyone in Australia, you have already made it into 2020 while we still have 12 hours to go. Let me wish you all the best and thank you for so much wonderful dotting time with you all on KZread. Love from Germany. Mónica

love that mold, and the idea for using surfactant to reduce bubbles thank you

Hi Angela..very informative video..thank you! I'm on my way to your shop to purchase the sphere mould..so happy you have another creation to dot. ♡

Thank you for the tips! I will using the surfactant . I always get the little bubbles. I hope to purchase the two new molds very soon.

Thank you for this. I was so scared to get started. Your instructions are awesome and thank you for the sheet on how much to use. I order my molds from your company through Amazon because I could get them faster😊.

Thank you sooooo much for this video, I literally just ordered my very first art stone mold from you last night, I ordered the #5 & I’m soooooo looking forward to making one & trying the amazing Mandala painting technique for the very first time & yeah I know I probably should of started smaller, but I like big things so that’s why I jumped straight to your biggest mold YIIEEEEEW Ohhhh & I didn’t realise you were in Australia when you started talking about Bunnings I was YIIEEEEW now I can use the same products hahaha

@anjelanewshoes2617

Жыл бұрын

Fantastic! Enjoy 😘 Anjela

Just poured my first stones, so exciting. Thank you for very clear directions Anjela x

@HappyDottingCompany

Жыл бұрын

Wonderful! Enjoy. 😊

@nariepittman4632

Жыл бұрын

@@HappyDottingCompany they turned out fantastic 😃

Just poured my 1st 4 moulds. Thanks for the easy download measurements!

Thankyou so much. A wonderful comprehensive tutorial. I think k I just found my new hobby. I'm looking forwards to being able to buy some new toys.

Thank you so much for this video! I just purchased your round stone and heart combo set. I’m so excited to receive them. We are going to make mini mosaics for our garden using concrete then seal them. Thank you!!!

@HappyDottingCompany

2 жыл бұрын

Wonderful - thank you - Enjoy! :)

Angela, if I could hug you, I would. You have made a project that was intimidating much more achievable for me. Here in Colorado, we don't find smooth stones easily. With your products and your tutorials, I am ready to really have some fun. THANK YOU for sharing your wisdom with us. Please know I'm sending (safe) hugs from chilly Colorado. Tiffany

@HappyDottingCompany

3 жыл бұрын

😘

Lovely finished product! I've bought 3 of your molds and they work very well. I have yet to dot any one of them, I paint designs on them, they're lovely and smooth!

Looking forward to purchasing one! Thank you, Angela!

Thank you so much for all your products! They're fantastic!!! And your tutorials are very helpful! 💕🌴💃

Thanks so much for the beautiful video. The exploration is so detail

I just received my order in Cape Town, South Africa. Thank you 🙏 I absolutely love my molds.

@HappyDottingCompany

3 жыл бұрын

Wonderful! Enjoy 😘

Thank you. I believe I have all of your products and two of a couple of them. Keep the molds coming. I love them. I really do appreciate, I am not sure what you call it, the text showing what you are saying. I do not have great hearing and this helps alot. Now off to order the sphere mold.

Hi Angela. This was very helpful. I've bought your molds, and I love them. I didn't see on your channel a tutorial about how to dot the sphere once it's been cast. I'd love to see how you did yours firsthand. Thank you again for your wonderful products.

@HappyDottingCompany

4 жыл бұрын

Thank you Nancy for your feedback. I'll aim to do another youtube clip showing the dotting a sphere :)

I received my second package of molds. I am so excited. Your quality is always awesome. Thank you very much!!! Belle Cerezo from Germany.

@HappyDottingCompany

Жыл бұрын

Thank you Belle, enjoy! Anjela 😊

Thank you so much!! I just made my first stones!

Thank you for this video.. I'm brand new to this and am looking forward to making my own stones and dotting away! ❤

@HappyDottingCompany

Жыл бұрын

Enjoy 😊 Anjela

Hi, thank you for your mould! It’s now sitting, waiting to set. However I wasn’t able to get the same stuff, I have resin plaster. But the algorithm might help others as it’s worked well for me. You give measurements to fill the mould, which I used for #4. The one you advise has a different ratio to mine, so here it is: I explain below but here’s the math: 142+375=517 divide by 4=129.25, x 3 = 387.75 (round up) 388. So for me it’s water 129g to powder 388. It fills the mould with no overflow (or under) 142+375=517. My ratio is 3 to 1, which =4. So divide 517 by 4= 129.25. That’s one unit. My water. To find out the powder I multiplied by 3: 129.25x3=387.75 which I rounded up to 388g. To see if I’d got it right I added them together and got 517! So it’s looking hopeful.

Finally I have purchased my first order of Ultracal 30. I am looking forward to using my rocks made from it.

Love your products. I don’t have the sphere but it is now on my list to get!

@HappyDottingCompany

2 жыл бұрын

Thank you Teresa 😘

Learned a lot! Thank you!

Just found your company from Rachel's rocks and made my first purchase! Looking forward to my new hobby!

@HappyDottingCompany

4 жыл бұрын

Enjoy Cyllyn. :)

@reinettemarais6868

3 жыл бұрын

Hi there we enjoyed this so much. Is there a place to order from in South Africa?

Thank you Anjela. In Belgium the product to use is called Raysin 100. Your molds are fantastic by the way. Love, Karin

@HappyDottingCompany

4 жыл бұрын

Thanks for that info Karin. :)

Ah ha, I've been watching Rachel from Canada for ages, I didn't realize you were in Australia, lol, I'm in nz, thank you for the video, much appreciated 😀

@HappyDottingCompany

2 жыл бұрын

Hello Neighbour! :)

Your moulds arrived today after a long trek across the world, they're fabulous and well worth the wait. Have plaster of paris, will pick up 12.5kg cement tomorrow and start sieving as no Ultracal available but this will give me added satisfaction and I don't want to take the short cut of neat plaster of paris. I don't want to frighten any kangaroos but if it works first time you'll hear a sonic hallelujah boom from England to Australia & beyond!

@HappyDottingCompany

3 жыл бұрын

How wonderful - Enjoy! 😘

@susanhamilton3212

3 жыл бұрын

@@HappyDottingCompany Success! Cast all 7 moulds using a 80/20 plaster:cement mix. Hand-squidging with gloves and your surfactant worked beautifully and the casts dried out after a week, slowly turning almost white and I used a tiny bit of filler for the few airholes which occurred fortunately underneath. So incredibly smooth, I'm really thrilled and excited to start painting them. Brilliant video, thank you again!

@HappyDottingCompany

3 жыл бұрын

@@susanhamilton3212 You're welcome! Enjoy 😘

amazing!!!!! I am soooooooo happy!!!! that and i checked out the website and you have a new tightlight mould and lowered the shipping cost for free shipping thats just awesome. i already have the moulds in my etsy basket ready and hopefully soon I can buy them :D keep them coming hahaha I love it also question how long do you wait after demoulding the castings to paint?

I love your molds although my old hands had a very hard time getting the stone out of the mold. What I did was add some Brusho crystal colour to the dry mix. The result was stunning. I made one green and one yellow. The Brusho is SO concentrated that I only used ⅛ teaspoon for the large mold. I tried the green because I want to paint turtles on the rock and thought a base of the green would make things easier. I highly recommend using the Brusho crystals.

@HappyDottingCompany

2 жыл бұрын

Thanks so much for letting us know Sarah. 😊

@sarahyoung1676

2 жыл бұрын

After more practice I am now able to roll out the stone without a problem. Love the mold.

@HappyDottingCompany

2 жыл бұрын

@@sarahyoung1676 Fantastic! , Anjela

So so helpful, thank you

I found this video fascinating.

Thank you for the great info

Brilliant thank you

I bought a product called a Dental Plaster from Bunnings. I saw on the web that this was a good thing to use! I really hope so as it only came in 20kg bags!!

@sarahdermody6665

4 жыл бұрын

How did it go?

Thank You!! 😊

Merci beaucoup pour tous ces conseils.

@HappyDottingCompany

10 ай бұрын

De rien. Apprécier :)

For NZ fans of dotting. You can get quality casting mix, including Ultracal30 from BarnesNZ located in Auckland 😁

Great Video. I wrote how much water and power on each one of my molds for a quick reference......

@HappyDottingCompany

Жыл бұрын

Great idea! Anjela 😊

Thank you 😊

Thanks for this useful tutorial, you mention you put Resin on after you have finished dotting, do you have a tutorial on this as i have never used this before on anything and so worried I might ruin my work, but think it looks brilliant and would love to try. If no tutorial do you have any tips ie what resin and mix, do you dip the stone or what? Many thanks

Hi Angela, I noticed you didn’t tap your molds at all to release any bubbles. Im going to try the surfactant as i do get tiny micro bubbles even after tapping. Thank you for sharing your tips.

I placed an order for the new molds, I did not find the download data sheet, where do I find that to purchase? Thanks. I also want to know if you are ever going to try and make a mold cover for the tealight candle diamond shaped holder? Just love your products. I have all of them, some I have 2 and 3 of the molds.

Thank you for all of the very helpful videos! I just received my 4-mold set and I'm excited to get started this weekend (it arrived very quickly and was packaged so nicely, thank you!). One question - sorry if I missed it in the video, but how long should the stones set before painting after they come out of the mold? Thanks again!

@HappyDottingCompany

2 жыл бұрын

Thank you for the lovely feedback Mia. The castings need to be thoroughly dry. This can take up to a week in some climates. Some people put the castings in a fan oven to speed up the drying process. Any dampness in the castings may result in problems with paint adherence. :)

@Mia-rj5gs

2 жыл бұрын

@@HappyDottingCompany Thank you so much, that's very helpful! I live in South Texas where it's very hot and humid, so it might be the longer wait time for me :-). Getting started here in about 10 minutes. Wish me luck! :-D

Hi I bought plaster instead of ultra cal this time. Like ultra cal better. Can I mix concrete into the plaster? If so, what type?

Hello. Thank you for making these wonderful videos. My first mold just arrived the multiple hole for rock painting. I couldn’t understand what the spray surfactant is. Is this water? Thank you for clarifying for me.

@HappyDottingCompany

3 жыл бұрын

It's a weak solution of water and dish-washing detergent. A surfactant breaks surface tension and reduces the likelihood of bubbles in the casting. 😊

🙏🏻❤️

🥰🥰🥰🥰

Hi Anjela, I'm about to order one of your molds from Amazon and I'm learning a lot from your videos. I would like to suggest that you invest in a microphone. I find it difficult to hear you. I'm looking into to getting one as well. I understand a simple mic that plugs into a USB port on the computer will help quite a bit.

FYI-excess stirring will cause bubbles

Although I've tried mixing my powders (Crystacal R) in different ways, I still get air bubbles mainly on the underside of the stone. I do spray the moulds with a water/surfactant mix and make sure they're clean, I also put the moulds on a vibrating table for a couple of minutes. If I want to fill the pin holes, does it make sense to make a small mixture of the Crystacal R? Love the measuring chart by the way, each quantity has been more or less spot on.

@HappyDottingCompany

4 жыл бұрын

Mike I would just use a readymade spak fill type product from hardware store to fill any small defects - much more convenient. If you're talking about bubbles on the underside when turned out - someone told me they spray the casting with alcohol (like isopropyl spray) after pouring the casting while still wet and it helps that. 😊

@mikeswain9085

4 жыл бұрын

Thanks for the help Anjela. Really appreciated.

Good morning! Love your molds. Thank you so much for your videos. They are such a help. I have a question about the tea light holders. Is there a glass holder that will fit in them? I've tried 3 different ones from my Dollar store and they are just a bit too large. Has anyone else found any that will fit?

@HappyDottingCompany

3 жыл бұрын

I'm not sure what you mean by glass holder. They are designed to fit the standard size tea lights that come in a metal casing. 😊

@sueritchie7985

3 жыл бұрын

@@HappyDottingCompany I mixed up my terms. I think I'm trying to put a glass holder that holds a "votive" size candle. I was concerned about the candle wax dripping on my painted tea light rock. Sorry about the confusion. Thank you for your quick response.

@alittl2046

2 жыл бұрын

I found some at ikea that fit

I wonder if the company says they arent meant for outside use because of the mediums used on the rocks more than the rock degrading itself. I have heard from many that watercolors even with a coat of resin will fade outside, maybe this is why?

I would like to buy the tools for dot painting pls and correct paints where from xx😁❤

hi pam again just wondering how long it takes to harden it doesnt look very thick is that the way its suppose to be

@HappyDottingCompany

4 жыл бұрын

It's only takes a few hours to cure - but I often leave mine overnight. You then need to let them dry out properly - at least a few days but depends on your climate. :)

What do I do with the surfactant? Do you spray the mould before you add the casting powder mix?

@HappyDottingCompany

4 жыл бұрын

That's correct Karen - just a light spray to cover - tip out any excess before pouring casting mixture. 😊

I have a hard time getting the sphere and the newest candle holder out of the molds. Is there an easy way that I haven’t figured out?

@HappyDottingCompany

4 жыл бұрын

They can be stiff and require strong hands but you'll find they loosen up a bit with use. :)

I'm curious what others do to support the mold while it's curing. It looks like you've got some packing/plasticky material rolled up and a rubber band to hold it. Clever idea... any other methods folks have used to support the mold??

@HappyDottingCompany

3 жыл бұрын

Hi Judy, one of those large stadium cups works well. However the packaging has changed since making this video - the mold is now sent with a cardboard cup to suspend it. Thank you, Anjela 😊

Thank you so much for the info. I bought my first two molds several weeks ago and will be making my art stones very soon. I was just wondering about clean-up. How do you clean the container that you mix the water and Ultracal 30 in?

@HappyDottingCompany

4 жыл бұрын

Hi Kathy, I rinse any residue out and dump into my garden - not down your sink - it can cause drainage problems. :)

@kathyfernaays8309

4 жыл бұрын

@@HappyDottingCompany Thank you so much for replying. I figured it wasn't good to have it go down the sink drain, LOL. I made my first stones and used the little bit extra to fill the cavities of one of my paint pallets like I believe you have done. I used a dry paper towel to clean out the container and then a wet paper towel to finish. Worked great. My heart and 3 inch round art stones turned out great. Can't wait to make more. (The little paint pallet molds turned out as well.) Thank you so much for your wonderful tutorial and download tor the amounts.

@m.ilievs6627

4 жыл бұрын

Thank you for asking this question! I've been wondering the same thing since I know dumping it down the drain would be a costly mistake

@carolburton5853

2 жыл бұрын

If you live in an apartment like me line the bowl or whatever container you’re mixing in with a sturdy plastic bag. Then once you’ve poured out your mix into your mold just tie up the bag and place in the trash. Hope this helps.

@kathyfernaays8309

2 жыл бұрын

@@carolburton5853 Great tip! I may have to give it a try. 😀

Hello from ITALY I would love to get this mold but it is very defficult have come ??

Hello, Anjela. What type paint do you use for the background? Any tips on how to avoid brush marks?

@HappyDottingCompany

5 ай бұрын

I just use acrylic paint - (no particular brand) for the background colour. If you getting heavily textured brush marks you could try thinning your paint with some water (give a couple of coats if necessary) or use a finer bristled brush if you think the bristles are very coarse or stiff. I wouldn't be too fussy about the background as any art you put on top will hide the background.

I am having trouble when I use the Ultracal 30 or cement with the acrylic Folk art or Apple Barrel paint peeling off or scuffing very easily. I usually allow the #3 mold stones and tea light holders dry for at least 3 full days. Any ideas?

@HappyDottingCompany

2 жыл бұрын

Hi Rhonda, I think 3 days drying is still not long enough - allow at least a week - also depends on your climate. Some people actually put the art stone castings in a slow oven to speed up the process. Any moisture remaining in the casting will be a problem for paint adhering. You could also try a spray sealer (from a hardware store) before applying your base-coat. Anjela 😊

@rhondalou5308

2 жыл бұрын

@@HappyDottingCompany Thank you!

Once I’ve waited the appropriate time and my stone is set, can I start painting immediately? Thanks

@HappyDottingCompany

Жыл бұрын

No, you need to let the casting dry thoroughly and this can take about a week. Any moisture remaining in the casting may result in problems with paint adherence. It’s best to make a number of stones ahead of when you want them so you’re not “waiting” for them to dry. 😊

What do you suggest using to support the sphere's if we didn't get the foam bits in our shipping envelope??

@HappyDottingCompany

3 жыл бұрын

A large stadium cup or round takeaway container 😊

Hi! I'm new to your chanel and new to gypsum casting and I want to know, would you say the final pieces made with Ultracal are heavier than the ones made with regular gypsum??

@HappyDottingCompany

Жыл бұрын

Yes that's correct Michelle. The Ultracal is heavier and more like a real stone weight - but it can also be pricy depending where you are. All casting powders will work just have different pros and cons. Anjela 😊

@miichSD

Жыл бұрын

@@HappyDottingCompany thank you so much! I found a distributor near me and I think it's at good price so I'm gonna give it a try 🙆🏻‍♀️

Can the same affects on the silicone be made by washing it in dish soap as to spraying it?

@HappyDottingCompany

Жыл бұрын

Probably 😊

I have been using straight cement - type GB Builders Cement from Bunnings for my stones and they seem good. Do you think there will be a problem with them in the future?

@HappyDottingCompany

4 жыл бұрын

I certainly don't know of any problems using cement problems. 😊

@avrilc5258

4 жыл бұрын

@@HappyDottingCompany Thanks Anjela, will so how they go. Love your moulds and tutorials by the way! Thanks so much.

Hola, en mi país no existe Ultracal30. Cómo puedo sustituirlo? Gracias

Hello! Do you have a link I could use to purchase Hydrocal? And perhaps a list of supplies for a beginner to casting?

@HappyDottingCompany

Ай бұрын

Please message me via Etsy and I can send you some casting powder information. Thank you, Anjela 😊 happydottingcompany.etsy.com

Hello, I just bought 3 Happy Dotting Company molds and I made my first mandala stones using UltraCal 30. My question is, can I use Portland cement in these molds? Has anyone tried it? I’m thinking, if I used Portland cement they would be more durable. I think they would come out of the molds just fine but on the other hand I don’t want to ruin the molds I just bought. So if anyone has tried Portland cement with their molds let me know how it went. Thank you.

@HappyDottingCompany

6 ай бұрын

Hi! Many people use a range of different products including cement based ones. I don't know if Portland cement exactly has been used. You may find a comment on this in the pinned post on our FB page which is about casting. 😊

Angela, what did you spray into the molds? I couldn’t hear what use said and could read on the bottle :) I have several of your molds but have never sprayed anything in them. Thanks, Judy

@HappyDottingCompany

3 жыл бұрын

A homemade surfactant - a weak mixture of dishwashing liquid and water - it prevents bubble holes. 😊

@JEHomestead

3 жыл бұрын

Happy Dotting Company Ok! Thank you so much Angela 😘

I didn't realize I needed to let the mixture set for a few minutes before starting to mix. Is this why my spheres are flaky and bubbly on the bottom 1/4 of flat part of the sphere?

@HappyDottingCompany

4 жыл бұрын

Hi, I doubt it's got anything to do with it - I think that's just how the mixture sets. You can give it a light sand with sand paper to remove any loose bits before base coating.

4 жыл бұрын

Happy Dotting Company ok thank you for responding!

I'm new at this, I don't understand how to use the template, once i made my markings with the pencil is a video on how to get started?

@HappyDottingCompany

3 жыл бұрын

Hi Christine, the dome template is really used just like any other stencil for dot art. So here's a link to a beginner dot art video that will help - kzread.info/dash/bejne/o2uO0Kexkd3Se9I.html

Hi Anjela, I'm very new at dotting and it has become an obsession. I want to have the sphere in your video, but it's not in your Amazon store. Please tell me where I can find it. Thank you so much.

@HappyDottingCompany

7 күн бұрын

@@amandaji4466 Hi 👋 We can definitely help you with this. Send me a message on Etsy and I will create you a custom order. Thanks Anjela happydottingcompany.etsy.com

Angela I looked on you Etsy and can’t find the sphere or octagon mold. I would love them. Where can I find em TFS-Rebecca

@HappyDottingCompany

4 жыл бұрын

Here's the link for you . :) . www.etsy.com/listing/761876645/sphere-mold-with-dome-template?ref=shop_home_feat_3&frs=1

Complete Newbie here. I'm confused on how you make your dots on the chalk lines. How do you know where to put the dots?

@HappyDottingCompany

2 жыл бұрын

Hi Brandi, this is a more comprehensive youtube for beginners about Dotting and how to use stencils - kzread.info/dash/bejne/o2uO0Kexkd3Se9I.html

I’m very interested in this large dome mold!!! I don’t see it in your shop. Is there ANY way I can purchase one? 2 years ago I wish I had seen this sooner.

@HappyDottingCompany

2 жыл бұрын

I'm not sure which one you mean. The sphere mold? Please send me a message in our Etsy shop and I can send you a link when I know which one you mean. 😊 www.etsy.com/shop/HappyDottingCompany

How do you clean your mixing tub and molds after the ultracal is poured out? Can you wash them in the kitchen sink?

@HappyDottingCompany

3 жыл бұрын

Hello, no definitely don't wash residue down the kitchen sink - otherwise after repeating this you risk blocking your drain. I rinse the container outside in the garden. Thank you, Anjela 😊

@carolburton5853

2 жыл бұрын

If you live in an apartment like me you can line your mixing bowl with a sturdy plastic bag and once you’ve poured out your mix into your mold just tie up the plastic bag and put it in the trash.

hi i just ordered some of your molds and im watching you on utube and i see u have an sheet of paper with the mesurments for the t lights and round molds i really need one where can i get that

@HappyDottingCompany

4 жыл бұрын

Hi Pam, there's a downloadable data sheet with all the mixing quantities on my website - www.happydottingcompany.com. Thanks, Anjela :)

@pambleier6722

4 жыл бұрын

Thank u so so much now i can start using my molds thanks again

Another question ... how long do you let the mix sit once you've put the water and powder together (before you use your hand to stir)?

@HappyDottingCompany

Жыл бұрын

Only about a minute - I’m usually impatient 😊

@achau9598

Жыл бұрын

@@HappyDottingCompany ok. My last one was about that long and I had a lot of water on top as it was in the mold. Though I might have done too soon

What do you use to paint the stone black ?

@HappyDottingCompany

2 жыл бұрын

Just black acrylic paint. :)

Could you possibly advise me which Cement in the UK is equivellent to what you use in the US please, I have been searching for a long time now, and can't seem to buy the brands you use...

@HappyDottingCompany

Жыл бұрын

What mix you use depends on your location and what you have available. Many different casting plasters work well. I like using Ultracal 30. Unfortunately, in some places it can be hard to get or expensive. Please note there is a downloadable data sheet on my website with the mixing quantities for Ultracal 30 for each mold and stone dimensions (the same ratios work for Perfect Cast). www.happydottingcompany.com Some alternative casting plasters include - USA/Canada - Perfect Cast, Rapid set Mortar mix from Home depot, Quikrete, Mapei, Dental Stone powder, Hydrocal powders, In the UK - Crystacast or Herculite Stone.

@lilacblossom5520

Жыл бұрын

@@HappyDottingCompany Thank you for your quick reply, there seems to be more and better options in USA and Canada than here, however I will take a look at the couple of options you have kindly given me. When I find something to make the stones with, I will definitely be back to buy your molds...Thank you once again, with kind regards to you :)

Thank you so much for this video. Do you send your moulds to Spain? 0r could you recommande someone near to buy them? Greeting

@HappyDottingCompany

2 жыл бұрын

Hello, normally yes we send everywhere. However I've just had a parcel stopped by customs and I don't know why - trying to sort it out now. Thank you, Anjela 😊

@mengraciap.5605

Жыл бұрын

Yo soy de España y pedí los moldes y ya los tengo en mi poder sin problema. Lo único que tuve que pagar 30€ por aduana

What is the black paint you use as a base coat??

@HappyDottingCompany

4 ай бұрын

Just regular acrylic paint - I don't recommend any particular brand. 😊

I’d like to make Christmas ornaments. Are they going to be too heavy?

@HappyDottingCompany

3 жыл бұрын

Yes I think they would be too heavy to hang. Zdotdesigns on Etsy has some patterns for Xmas ornaments - there's probably some ideas there of how she does it. 😊

Do you think a 50/50 mix of plaster and cement would work?

@livingcreatively1

4 жыл бұрын

You can, I have done it but just remember work fast. Plaster of Paris sets quickly

@sanroz2

2 жыл бұрын

What is ratio of water

How long would you suggest air drying the stones after making them before painting please?

@HappyDottingCompany

2 жыл бұрын

Hi Carole, I suggest letting them dry thoroughly - in my climate this takes about a week. I know some people will put the stones in a fan oven (not too hot) to speed up the drying out process. They shouldn't feel cool or moist at all. Any moisture left in the casting will result in problems with paint adherence. :)

@IpuWhenua

2 жыл бұрын

@@HappyDottingCompany whoops! I only waited 3 days, I will see what happens. Thanks for the advise

What is the name of your spray agin pls😁

I don't own a scale --- is this necessary. If so where do I get. Thank you, I'm just starting out.

@HappyDottingCompany

4 жыл бұрын

If you use ultracal 30 the ratio is about 1 cup of water to 2 cups of powder. If you use another casting powder like something cheaper from your hardware store you can just experiment to find the mix that works the best. 😊

Is there any requirements for room temp when making the rocks?

@HappyDottingCompany

Жыл бұрын

Not that I'm aware of. Anjela 😊

@achau9598

Жыл бұрын

@@HappyDottingCompany sweet! Just finished my first one! Love it!

It says you don’t ship to the USA. Do you know where I can order the molds. I can’t find any other countries that sell the molds. Thanks, Sandra

@HappyDottingCompany

4 жыл бұрын

This is just a temporary disruption because we're waiting for stock to arrive to our USA dispatcher in Wisconsin - it should only be a few days and then the settings will change 😊

@topanga5759

4 жыл бұрын

Happy Dotting Company Thank You so much for the response. I will keep checking back with your store to see when they are avaiable. Thanks again. Sandra

@rhondalou5308

2 жыл бұрын

I found mine on Amazon!

Hi Angela, with your stunning dotted spear I am wondering what paint you used? Thanks so much stay safe and most of all have fun🍫🍬🙂🙂🙂🤩🤩

@HappyDottingCompany

4 жыл бұрын

Hi Kylie, I usually use fluid acrylic paint. Like Jo Sonja's Matt fluid acrylics in Australia, or Golden fluid Acrylics. I do have a youtube clip on paint within this youtube channel :)

@kckreations

4 жыл бұрын

Happy Dotting Company hi thanks Angela I went and watched your KZread clips. I place an order last night