Built one this weekend. Thanks so much for the video. The 15" piece across the top was a little short so I changed it to 16" and fits perfect. I used plexiglass for the middle. Thanks again. My son and his friends love it!

@DaVande07

9 ай бұрын

same brotha

@DaVande07

9 ай бұрын

did 16 work perfectly or should i do 17?

Okay….well, it’s all completed. I followed the instructions pretty closely and except for a few varying measurements, it is a near replica of the one in the video (no paint, however). It was straightforward and without your video it would have nearly impossible to build, so thank you for doing the hard work 🥲. I particularly like the double sheet metal approach as it makes a louder noise and weighs it down even more than a single sheet. Excellent design!!🤩

@AngeloBodetti

3 жыл бұрын

That’s great! Yea that’s why we did 2, that loud bang makes all the difference

Awesome video!!! In your description if you could change 21” x (2) and 16” x (2) and also add 5 1/4” it would be a little easier to follow. Thanks for the how to!!!! 👍🏻

We padded legs with split pool noodles to settle those corner arguments. Make a very different sound than hitting the bare PVC pipes. Solved the issue for us.

I built one to these specs and it worked great! Thanks!

@AngeloBodetti

3 жыл бұрын

Awesome!

This worked great for me! Thank you for the measurements and your time making this.

@AngeloBodetti

3 жыл бұрын

You’re welcome!

I used an online tool to maximize the material I had and allowed me to get all the pieces cut up with just 3 five foot long PVC. I also used high quality 1" PVC (from Lowes) and felt that was plenty wide and heavy enough to make this all very sturdy. I would recommend labeling each piece with their measurement and label with a sharpie before cutting. If you put the label at the very end of each piece, it will get covered up when you put it in the joints. STOCK PIPE #1: 21" - Strike Zone Side 16" - Base Front Leg 15" - Down 4" - Back of Base 4" - Back of Base STOCK PIPE #2: 16" - Base Front Leg 15" - Down 11" - Front of Base 7" - Off Back 7" - Off Back 4" - Strike Zone Bottom STOCK PIPE #3: 21" - Strike Zone Side 16" - Strike Zone Top (some comments say 16 is needed, mine needed around 15.5 so I trimmed this one down to fit) 9.5" - base back 5.25" - Strike Zone Bottom 4" - Strike Zone Bottom (you should have 4.25 inches left as scrap on this stock piece)

Love this it helped out a bunch on making it

Just made this today. Great video, exact measurements, didn’t have any problems. Thank you🙌🏼

@AngeloBodetti

3 жыл бұрын

Awesome!!

@lukesgroi6268

3 жыл бұрын

What size is the sheet metal supposed to be

@epigaulaus9500

3 жыл бұрын

@@lukesgroi6268 probably like half an inch less than the rectangle

Thanks for the tips...

Great video - just built and my family and I are having a blast. One thing, I used your cut list before the build and I think you're missing two cuts. You should add another 21", another 16", and your 5 1/4 cut (I used 5). You need right about 15 ft of PVC for all the cuts. Again, thanks for sharing! Below are how I have it written down for future builds. 21" x 2 16" x 2 15" x 3 11" x 1 9.5" x 1 7" x 2 x 1 5 1/4" x 1 4" x 4

Thanks for the help!!! Great video.

@AngeloBodetti

3 жыл бұрын

Thank you!

@brandonedwards9812

3 жыл бұрын

It wouldn't have to be assembled. Just include some instructions. Cheers!

I made it and it’s beautiful beyond words

@AngeloBodetti

2 жыл бұрын

Makes playing much more fun!

@kubamaldonado2476

2 жыл бұрын

@@AngeloBodetti For sure!

Thanks for the video. One thing in the dimensions cut. I would List the "strike zone downs" and add (x2), same with the base front legs. Was a little confusing with the other cuts listed as (x2)

@AngeloBodetti

3 жыл бұрын

Gotcha!

My little brother and I followed your instructions and made an identical one. We're gonna use it all summer! Thanks man!

@AngeloBodetti

2 жыл бұрын

Nice!

@masonpirtle929

Жыл бұрын

how much does it cost

@pro-xo5hu

Жыл бұрын

@@masonpirtle929 I don't remember how much I spent but couldn't have been more than like 50 bucks

45 at top angled to the back of base.

How much feet in total of pvc pipe also do you do the list twice?

Angelo, What's the size of the sheet metal?

My only question is what size PVC pipe

would you recommend painting it before putting it together so you don’t have the worry of missing spots?

@AngeloBodetti

3 жыл бұрын

I painted after because I figured paint would scrape and chip while I assembled

Great stuff...where did you get sheet metal to cut? Thx.

@AngeloBodetti

2 жыл бұрын

Home Depot

What are the length of the legs

What inch is the PVC?

Awesome video! I love the new base, I'm looking to build something similar. What are the dimensions of the final strike board?

@MasterofSheepdogs

3 жыл бұрын

@@AngeloBodetti I'm not seeing the link /: could you update the description with it please?

@AngeloBodetti

3 жыл бұрын

@@MasterofSheepdogs the strike board is 21x15. I recommend make everything and then cutting the strike board. This way you know it will fit perfect.

What size sheet medal would you get for this strike zone?

@AngeloBodetti

3 жыл бұрын

The cutout is about 15x21. Home Depot has a bunch of different rolls sizes

@justicesullivan6058

3 жыл бұрын

@@AngeloBodetti thanks

For the sheet metal did you cut it or did they have the sheet metal already in that size

@AngeloBodetti

2 жыл бұрын

Cut it with snips

How many t joints and elbows would you need?

@AngeloBodetti

3 жыл бұрын

Eveyrthing is in the description, but its 4 t and 10 corner

What do we need for the middle on the strike

@AngeloBodetti

3 жыл бұрын

It’s sheet metal. You can get it at Home Depot. It’s used for roofs.

where do you get the thin sheet of metal

@AngeloBodetti

3 жыл бұрын

Home Depot and Lowe’s have it

Where do I buy the pvc pipe and sheet metal from

@christopherfranovich9839

3 жыл бұрын

home depot

How much did you pay for all this? Just wondering, I might build one myself!

@AngeloBodetti

3 жыл бұрын

Was about $45 all said and done

What size is the tin sheet?

@AngeloBodetti

3 жыл бұрын

21x15 is the dimension of the finished piece

Do you have link of what sheet metal you used? Everything I’m finding is super expensive

@AngeloBodetti

2 жыл бұрын

Got it at Home Depot, it was cheap. Get roof flashing

What thickness in the pvc

@AngeloBodetti

3 жыл бұрын

1 1/4 inch I believe

Where did you find the metal sheet

@AngeloBodetti

3 жыл бұрын

Home Depot and Lowe’s have it. It’s roof flashing

I feel like it’s a little small. But does it just look like that in the video

@AngeloBodetti

2 жыл бұрын

I’m 6’3 and it’s fine for us

How many elbow and Tee joints do I need

@nathandrafke8363

2 жыл бұрын

10 elbow and 4 T joints

What are the dimensions for the sheet metal

@prestondahm5103

3 жыл бұрын

Nvm 21x15

What are the dimensions for the sheet metal?

@AngeloBodetti

3 жыл бұрын

21x15

What size sheet metal do you need

@AngeloBodetti

3 жыл бұрын

21x15 is the dimension of the finished piece

@troyboy720f5

3 жыл бұрын

@@AngeloBodetti thanks so much bro

How much feet of PVC pipe do you need?

@AngeloBodetti

3 жыл бұрын

I don’t remember the total but in the description are the measurements so you can do the quick math there

@nubbyneef1068

3 жыл бұрын

Your probably have it now but I used 13

How thick is the pvc thx.

@blur1335

3 жыл бұрын

1 1/4

@rileylight9922

3 жыл бұрын

Thx

Size

If I used 3/4 PVC Pipe would that work?

@AngeloBodetti

Жыл бұрын

Yes

Where do u get the metal?

@AngeloBodetti

2 жыл бұрын

Home Depot. Roof flashing

Does this take about 13 feet of Pvc pipe?

@kmccb23

Жыл бұрын

Yes.. Lowes sells 10' pieces and 2' pieces so best to just get (2) 10' pieces.. I just priced this out at Lowes and without the sheet metal its $63 (pre tax).. Pretty pricey!

Hey

What is the list of the materials we need to make this

@AngeloBodetti

3 жыл бұрын

They are in the description and the video. Let me know if you have a specific question

How much did it cost to buy all the materials?

@doofart6736

3 жыл бұрын

About 45$

@AngeloBodetti

3 жыл бұрын

Correct, about $45 total.

@gradyhoffer6162

3 жыл бұрын

It cost me about $35 if you have zip Ties and an old tote lid and don't plan to paint it.

@xxcabxx11

Жыл бұрын

How the heck did you guys get it for soo cheap, I just did it and it about 90

3:28

what size is the pipe used?

@FlynnRider06

Жыл бұрын

He used 1 1/4” PVC

What size was the sheet metal?

@AngeloBodetti

3 жыл бұрын

21x15 is the zone itself. Just be sure to measure so it’s a good fit

@vader1094

3 жыл бұрын

Thanks

What are the dimensions for the sheet metal you used?

@AngeloBodetti

3 жыл бұрын

21x15. I recommend you build it, then measure and cut to make sure it fits well

@tferrari01

3 жыл бұрын

@@AngeloBodetti thank you! What type of sheet metal did you use?

@AngeloBodetti

3 жыл бұрын

@@tferrari01 just thin sheet metal from Home Depot. Roof flashing

@tferrari01

3 жыл бұрын

@@AngeloBodetti thanks, aluminum?

@AngeloBodetti

3 жыл бұрын

@@tferrari01 yes

what is the size of the sheet metal in the middle

@AngeloBodetti

3 жыл бұрын

15x21 but i recommend measuring and cutting instead of cutting first

@Drwhol11

3 жыл бұрын

@@AngeloBodetti Thanks so much!

what size pvc is it

@user-pb1dl3wm9w

Ай бұрын

1 1/4

How much do you think it would cost?

@AngeloBodetti

2 жыл бұрын

Before inflation it was under $75

Can u tell me roughly the cost it is to make one

@wilsonwald8675

3 жыл бұрын

$45 he said

@AngeloBodetti

3 жыл бұрын

Yes about $45

@nolanhammon3499

3 жыл бұрын

@@AngeloBodetti thx

@trickyj1491

2 жыл бұрын

It cost me about double that. Not sure if it’s from covid or what - just FYI Home Depot also wouldn’t cut the PVC or sheet metal to size for me

@AngeloBodetti

2 жыл бұрын

Yea I cut the PVC myself and same with sheet metal. PVC with a saw and metal with snips.

How much did this cost

@AngeloBodetti

2 жыл бұрын

Before inflation, under &75

What circumference pvc pipe did you use?

@AngeloBodetti

2 жыл бұрын

I forget, but it doesn’t matter. Grab what’s sturdy and available

@loganmoyer4613

2 жыл бұрын

@@AngeloBodetti we wound up using 1.5 inches circumference. Worked great!

How much would all of this cost?

@twixzyfortnite

Жыл бұрын

No joke it costed me 69 dollars

@twixzyfortnite

Жыл бұрын

They didn’t have some stuff but it was supposed to be 45

How much would this cost ?? I want to make one but I don’t want to spend a lot

@AngeloBodetti

2 жыл бұрын

It was about $50 worth of supplies

Can u make one for me and ship it I’ll pay you ahead of time.

@brandonedwards9812

3 жыл бұрын

Yeah he could sell quite a few of these. I'm a DIY guy but there's definitely a market right now.

@AngeloBodetti

3 жыл бұрын

Shipping would be insane unfortunately

how much does this cost

@Tk-Toons

Жыл бұрын

$45 at time of recording

@kmccb23

Жыл бұрын

I just priced it out at Lowes.. $63 pretax and that's without the sheet metal .. Add another $15 for that and you're looking at around $84 with tax :O

@Tk-Toons

Жыл бұрын

@@kmccb23 :o

How much you want to make one for me

@AngeloBodetti

3 жыл бұрын

Where do you live?

@cohenmitchell3283

3 жыл бұрын

@@AngeloBodetti sorry but can’t tell you that

@AngeloBodetti

3 жыл бұрын

@@cohenmitchell3283 i get it, but you asked if I could make one for you. Obviously your location determines the answer to that question

@cohenmitchell3283

3 жыл бұрын

@@AngeloBodetti I was joking

@cohenmitchell3283

3 жыл бұрын

@@AngeloBodetti I used it to make it

Should have said what lengths were being used in the building process. And you could slow the video down. It was hard to follow. And in the end I had to add extra pieces to make all of it fit.

@AngeloBodetti

Ай бұрын

Everything is literally in the description. Took you longer to write this than to click the description and see the lengths

I heard you say your disclaimer and I'm not giving you shit. I don't know they're calling offical height but the two you had didn't seem to match up in height.