Code and circuit diagram links in the description.

@karthikgamers7069

9 ай бұрын

Noo sir it rally works

Awesome project

@sritu_hobby

Жыл бұрын

Thank you

Tried doing this project but with a LM35, LDR and gas sensor using an esp-01 wifi module.. The readings for LDR and gas sensor are correct but Lm35 is not showing correct temperature. If I just use the Lm35 only then it shows correct answer but with other sensors in circuit it shows wrong answer. What us the problem please help?

Good job bro...

@sritu_hobby

2 жыл бұрын

Thank you

Sir i wanna ask i have 2 problem, so i use Nodemcu esp 8266 V3 different with you then on the Arduino when i run the code error i mean the problem is Nodemcu module what should i do ? Then for DHT 11 i use different to with you so the graphic can't working and LCD can't read that what should i do sir? Please answer sir

Sir Add digital output relay for automatic and manual swicth?

Thank you sir

@sritu_hobby

9 ай бұрын

Welcome

If i want to add fir sensor to this project, can you please provide the info, it will be helpful.

Thanks bro.Its working❤️

@salehinahmmed9355

Жыл бұрын

Can plz give the I2c module library code which was used by you it will be helpful

@aronnoarnab6438

Жыл бұрын

@@salehinahmmed9355 it was in my laptop bro..my laptop is not with me right now. I can provide it to you later.

Sir i couldn’t connect wifi with blynk... No problem in code.. The code was uploading but didn’t get any ip in serial monitor that i was used for connecting wifi with nodemcu...what would i do for this please help me!

I am doing this project but the temperature and humidity sensor is not showing any results . i have done the connections properly as shown in the video . rain sensor , ldr sensor and pressure sensor is working correctly . please suggest what to do .

Which version of Arduino ide you used sir? Because i can't to it with latest version(1.8.18) showing lot of errors

Hi I tried the raindrops module, but the rain sensor doesn't detect water, it rises when i touch it.

How many pin Breadboard are you using? 830 or 840?

Bro It showing compilation error in SFE_BMP180

Hi, will it work if I dont have the LED Screen?

Hello? I can't find the port, will you tell me everything

Sir code bhi upload ho ja raha h fir n led screen pe kuch dikh Raha n blynk server se ESP8266 connect ho raha h. Sare connection bhi miine 10-15 baar check Kiya please help sir

Hlo sir, I had tried this project and everything is running perfectly and it also showing reading in the app but jo lcd display hai uspe reading hi show nahi ho raha hai kuch bhi jaise aapke me show ho raha hai instead phone me accurate readings aa rahi hai sir plz help me with this lcd problem

My rain sensor gives a reading of 100. I check and recheck without success..any advice on this?

@sritu_hobby

2 жыл бұрын

It's normal.

@victorhurtarte7563

2 жыл бұрын

@@sritu_hobby , thakns for answer. But....when it is no rains reads 100, and when start rainings read a lesser value, Is that normal?..thanks again!

sir i have question for you, If I don't use jumper cables can I still run this project?

@Niv888

Жыл бұрын

i mean get test with clip jumpers

My ldr sensor only showing 1 light

Plz help me I'm getting error in this project

Hello I am in sti2d terminal and I have a project to present which is the smart cane for blind people and in this project I must use an accelerometer which plays the role of the motion detector and I must add the alarm clock/sleep function it that is to say when the cane moves towards an axis it lights up and when it does not move it is off. I need help because I'm really lost 🙏

@sayax4464

2 жыл бұрын

Can you help me ?

@sritu_hobby

2 жыл бұрын

What is your issue?

@sayax4464

2 жыл бұрын

@@sritu_hobby my teacher has already sent me a code I have to add a wake-up/sleep function of the cane for the blind, that is to say when the cane is at rest and it moves towards an axis (x,y,z) it lights up but when it does not move it is off.

Board name to install in arudion ide

sorry but i have a trouble, my ldr sensor dosent work, have something wrong in get value LDR sensor

@sritu_hobby

Жыл бұрын

Check your sensor or jumper wires

Can you provide list of components for this project and including cost

@ketanpatil7146

8 ай бұрын

no

what is the external 5v power source that is used ?

@sritu_hobby

Ай бұрын

Not enough power

I can't connect my esp8266 card to wifi or blynk app, please help

@sritu_hobby

2 жыл бұрын

Please visit my blog srituhobby.com

Hello sir, why not using bridge on breadboard? Can you explain please, thank you

@sritu_hobby

8 ай бұрын

What's bridge?

@aprilladaru

8 ай бұрын

@@sritu_hobby wire bridge to connect +- 2 side on middle of breadboard

@aprilladaru

8 ай бұрын

@@sritu_hobby oh i see you using bridge on white cable, it's hard to see it

Hi, The rain sensor shows 100% without water, but the percentage decreases when water falls on the sensor. How can I do it the other way around?

@sritu_hobby

Жыл бұрын

You can change it using code

@19orkhan94

Жыл бұрын

@@sritu_hobby Please can you change the code accordingly and give it back to me?

@19orkhan94

Жыл бұрын

I did the code myself, but it doesn’t drop to 0. The minimum percentage shows 1 and when water hits it, the value rises to a maximum of 55.

Hello sir port is not enable in arduino, what is the problem can you tell me sir

@sritu_hobby

Жыл бұрын

Please include the COM port drivers

Bro I got error exit status 1 how to fix it

@engineeraatifmemon5872

7 ай бұрын

Same problem

Please provide source code. Your link isn't work.

@sritu_hobby

Жыл бұрын

srituhobby.com

Hello brother im facing 'class LiquidCrystal_I2C' has no member named 'init' this error what should i do...

@saqibhassan7552

2 жыл бұрын

LCD displaying

@saqibhassan7552

2 жыл бұрын

plzz help bro

@sritu_hobby

2 жыл бұрын

Please include the I2C library

@saqibhassan7552

2 жыл бұрын

@@sritu_hobby i have included but its not working

@saqibhassan7552

2 жыл бұрын

@@sritu_hobby i have erase the int () command the project runs but lcd shows some ?.!.! theses signs

Sir can we make this using raspberry pi 3 and without the use of breadboard as a pcb?

@sritu_hobby

2 жыл бұрын

Yes of course

@gurmansinghsidana1978

2 жыл бұрын

Can you tell how?

@gurmansinghsidana1978

2 жыл бұрын

I need to do it can you help me?

Sir I can not find code link..... please can you help with it :)

@sritu_hobby

2 жыл бұрын

srituhobby.com

lolin or amica?

How much it cost to you , please tell me i have to make it in less time

@sritu_hobby

7 ай бұрын

Description

Coding is not working 💔💔💔💔💔

lcd,inti() pribllem in code cant solve

@sritu_hobby

7 ай бұрын

Include the I2C library

Coding not working