ABSOLUTELY DO NOT USE FOR ANY ANIMALS!! As it was recently stated by Tab... the paint is TOXIC... and, if you decide to skip the Painting part... the Silicone is ALSO TOXIC! If you still want to use this design... Please use a safe NON-Toxic Sealant like the ones that are used to build & seal Aquariums!! You want water for your pets, NOT a TOXIC Kool-Aid that will slowly & Painfully Kill your Animal(s)!

@CreatingCreations

5 жыл бұрын

Agree, I didn't realize that when I made the video but several of you have pointed that out to me. I would delete this video but I still think the design is pretty good, just use different materials to make it.

@prairiecreations

5 жыл бұрын

So remake the video.

@omagic1391

5 жыл бұрын

Creating Creations remake another one

@davidfarmer2049

5 жыл бұрын

I'm not sure why they sprayed it all tbh. Yes you should have pulled it and re run the video guys if this is likely to hurt anmals it is NOT a good edsign.

@sugarfluff1488

4 жыл бұрын

T Rokosh thank you for the advise if I didn’t know I might have made one

DONT USE FOR PETS !!! You said don’t paint the inside yet it appears you did the basin. Besides the RTV sealant to hold it together. HORRIBLE IDEA

@CreatingCreations

6 жыл бұрын

Yeah, I did. but I have now removed all of the paint from the inside. Is the sealant bad for pets?

@mrpanda2655

6 жыл бұрын

Yeah I wouldn't risk it just don't get why u didn't use hot glue then while everything down also wouldn't paint it either

More easier than what else I saw

@CreatingCreations

5 жыл бұрын

Thanks!

0:16 or you can just put 2 small "pencil-sized" holes... (or just use the soldering iron for the two holes) The first hole will be about 1 or 2 inches near the bottom. The second hole is higher and would be its "outside" water line/level. Your fingers are plugging the holes while you fill the container through its mouth. When the pet drinks the water, the water level goes under the top hole, thus air will be sucked in, and the water will flow out at the bottom hole, until the water level equalizes itself with the top hole.

That's pretty creative!

@CreatingCreations

6 жыл бұрын

Thanks.

You have a mind of pure imagination.

@barneyisalive6199

5 жыл бұрын

its not original, its just a cheap solution instead of spending 20 dollars

Thanks for Watching! Let me know if you liked the Second Me.

Thank you

smart!

Hey Micah, I just became a red belt in Taekwondo!🇰🇷

@CreatingCreations

6 жыл бұрын

Wyatt J. Sullivant That's awesome!!

@pyrofful

4 жыл бұрын

@@mrpanda2655 you have to learn to walk before you can fly. Give him some credit

Instead of using potentially toxic materials such as spray paint or ordinary silicone, I suggest you use no paint at all and silicone for aquariums.

Thats a great Idea! Will probably use that one.

@CreatingCreations

6 жыл бұрын

Thanks. Glad you liked it.

Hmmm nice video

@CreatingCreations

5 жыл бұрын

Thank you!

@CreatingCreations

5 жыл бұрын

Thank you!

This was an emotional rollercaster

@CreatingCreations

5 жыл бұрын

Umm, I presume that you are referring to my lack of knowledge about toxic chemicals whilst making this. So if you in fact are inclined to recreate this project then I would suggest using my design but don't follow my directions to closely. They can be dangerous!

@sarazazova

5 жыл бұрын

Creating Creations oh no don’t worry! I just really liked the effects and just the whole editing of the video

@CreatingCreations

5 жыл бұрын

@@sarazazova thank you very much!

@landonshepherd680

3 жыл бұрын

@@sarazazova 😂

So creative! Really useful. 😃

@CreatingCreations

6 жыл бұрын

Thank you:)

That's an amazing video. Well done.

Thank you, this was very helpful

@CreatingCreations

5 жыл бұрын

Thank you!!:)

@sugarfluff1488

4 жыл бұрын

me ._. How’s your pet doing?

Awesome, dude! Really nice and useful! 😊

@CreatingCreations

6 жыл бұрын

Thanks.

So I saw u wanted to build that electic go cart which wouldn't cost much but if you do use a welder if you have one also use a motor from harbor freight that's only 100 bucks and much faster than that little motor

@CreatingCreations

6 жыл бұрын

I'm confused. what are you referring to?

@mrpanda2655

6 жыл бұрын

You had a comment on a video and you said you wanted to build an electric go kart and said u didn't have the funds

@CreatingCreations

6 жыл бұрын

Mr Panda ok.

@mrpanda2655

6 жыл бұрын

Also why don't u do stuff like a go kart

@CreatingCreations

6 жыл бұрын

Mr Panda because I lack a lot of the supplies needed. But I'm actually working on an electric scooter right now.

🙃

NEVER EVER EVER USE PAINT IS TOXIC AND USE NON TOXIC (silocone) USED TO FIX FISH AQUARIUMS/OTHERS LIKE DOG BOWLS CAT BOWLES .

@CreatingCreations

5 жыл бұрын

Yes! I didn't realize that at the time of uploading.

@NARUTOUZUMAKI-dq8sy

5 жыл бұрын

Creating Creations ok just don’t do this again ok?

This kids don't know what the hell they doing

Got paint insid the dish .

@CreatingCreations

6 жыл бұрын

Yes I accidentally did. You should probably put tape on the inside while painting.

Caution : the glue is toxic for the cats!

@user-zv7nf6fy5l

3 ай бұрын

Oh thank god thank you for this comment I was going to do this to my cats with that material thank you my 😊😊

You DO realize that the water level in the bowl will always be the same level as in the bottle, right?

Also known as how to bred mosquitos

@CreatingCreations

4 жыл бұрын

let's hope not. Lol

Creating Creation don't pin any comments...

@CreatingCreations

6 жыл бұрын

1k Sub Challenge Without Any Video why??

you need to use silicone I with 100% silicone which is safe for your pet.

Oh yes. I too enjoy slowly poisoning my dog with paint and silicon glue. I'll be sure to take the advice of this kid when it comes to the health and safety of my beloved dog.

Don't try it, it's really horrible and not working at alll

@CreatingCreations

4 жыл бұрын

Hey, sorry to hear. What issues are you having with it?

@jigyasavats6081

4 жыл бұрын

@@CreatingCreations water is not stopping it's just running out

@CreatingCreations

4 жыл бұрын

@@jigyasavats6081 Do you have the lid on? If not it will just flow out. And is the slit for the water to fill the trough below the rim of the trough?

@jigyasavats6081

4 жыл бұрын

@@CreatingCreations okay thanks now I have tried it again and now it worked

@CreatingCreations

4 жыл бұрын

@@jigyasavats6081 Awesome glad to hear!