I found this channel by accident an I cannot keep my eyes off of it! You are a truly a very talented guy! Man what I wouldn’t give just to have a little finger full of your knowledge! Keep on making this stuff. You are truly an inspiration to me. But I can just barely run a hammer so....

@FishinNStuff

3 жыл бұрын

Man you can do anything you put your mind to do , all you have to do it try

@jeffbrummette6357

3 жыл бұрын

Thanks but I’m not very gifted in slot of stuff. I’ve just used my back all my life for grunt work. Lifting an tugging on coca colas. But I can dream,especially when I see the things you can do. Thanks for your kind words! I usually don’t get replies back. Please think of them locking locks for your rod holders an storage compartments. I bought an old boat back in June an bout all the hardware on my storage an rod compartments are gone. Thank you sir!

@jeffbrummette6357

3 жыл бұрын

Hey can you think of some kind of box thingy that goes in the back of the boat to hold onboard charger an all the batteries? I have a 1993 javelin that I bought in June of this year an the batteries slide everywhere an the onboard charger is just hanging on a plastic Tupperware thing. I’m in desperate need of a good fix for this if you don’t care to mull it over. I love your channel I watch it everyday,an I believe if someone can think of something you can! Thanks!

@FishinNStuff

3 жыл бұрын

They make plastic battery tray that's are cheap

Love your channel you're the DIY Master on fishing

@FishinNStuff

4 жыл бұрын

Thank you neither I appreciate you watching and taking the time to comment , sorry for the late response I received so many comments at once I over looked it , I apologize and I appreciate it brother

Those turned out great, and great job explaining how you were doing it. I bet people will be calling for them.

@FishinNStuff

4 жыл бұрын

Yeah a few lol . Thank you buddy

Loved it. I'm going to try this for myself. I was a machinist for abot 30 years so maybe I can do it. Great video my friend.

@FishinNStuff

4 жыл бұрын

Thank you brother, sounds like you got some skills too me so im sure you'll do great at it

@stillinyaisstillinur3300

4 жыл бұрын

Give it a try imsure it will turn out gr8

I really enjoyed watching this video on making rod holders. I was about to go out and buy about a dozen of them, but I believe I'm gonna have to try to make myself some. You have given me the confidence to make, rather than buy my rod holders, and I thank you for it. I subscribed for more of your videos, and I look forward to the next. Keep up the good work, and God bless you Sir.

@FishinNStuff

4 жыл бұрын

Remember everything looks easier on video , and the first one is always the hardest . On the adjustable rodholder base video I made 4of em and the first one I had to figure it out and the next 3 was a breeze . So don't give up and you can do it , I appreciate you watching and commenting and thank you for your support

Man, what can you not build?? Lol you are an inspiration to me. I love your channel please never give up what you bring to the youtube Community. I feel blessed to be a subscriber to your channel.

@FishinNStuff

4 жыл бұрын

I'm not sure I've ever reserved a nicer comment than that . I mean sometimes I'll complain a little too my wife and tell her it feels like I'm working 2 jobs , working all week then making a video all weekend, but its comments like yours that keeps me going brother. I really appreciate that. It means allot too me

Man you are an artist. That rod holder came out looking absolutely professional sir. Keep up the great work I am loving what you do!

@FishinNStuff

4 жыл бұрын

Hey buddy , I was over in your channel the other day but I can't comment I watch a lot of stuff on TV, your doing great brother

@StanleyOrchard

4 жыл бұрын

@@FishinNStuff man thats a compliment in and if itself... you suffering through my ugly mug on a TV! Lol very much appreciate you sir, thank you!

@FishinNStuff

4 жыл бұрын

Haha you ain't no uglier than me haha

Man. You can make anything my man. Looks great.

@FishinNStuff

4 жыл бұрын

Thank you buddy , you got some pretty dang good skills yourself , I watch your DIYs I really like that Pelican

Thanks for sharing this. Enjoy your videos. Have built the brake and these rod holders.. Provides lots of great ideas!!

@FishinNStuff

4 жыл бұрын

Yes Sir thank you for watching brother , I enjoy making videos about as much as I doi making fishing stuff . But I only keep doing it because ppl like you watch , so thank you

Love The Videos Dude! I Love My Fish Bite Rod Holders!!👍

@FishinNStuff

4 жыл бұрын

Thank you brother I really do like those Fishbites too , I had never heard of em back when I bought my Monsters though. I appreciate the comment buddy

Looking great 👍🎣

Love your idea I am totally gonna try to make some of these for my boat for trolling. I think I'm gonna weld on a bolt on each side of the cradle on top so I can take a small piece of black bungee strap and use it as a keeper so I dont loose a rod if it bounces out like you said has happened to you. Awesome build man

@FishinNStuff

4 жыл бұрын

Thank you brother i appreciate and I thank you for watching too . I'm always trying something new lol

This is a bad ass channel. Period. Love the videos!

@FishinNStuff

3 жыл бұрын

Thank you

bad ass my man! I always asked myself how there made and this is it!

@FishinNStuff

4 жыл бұрын

Im sure they bend em all with just brake press dies but I was trying to show how any body could do it . I appreciate you brother

Looks great buddy! Happy Fishing!

@FishinNStuff

4 жыл бұрын

Thank you Sir, I appreciate that happy fishing to you as well brother

Great idea and easy enough for me to make with my everlast welder.

@FishinNStuff

4 жыл бұрын

I hit a buddy that speaks highly of those welders . And he's a great welder Fabricator, so its saying a lot coming from him .

LOVE this video! Can't tell you how many times I've thought about trying this. After this video, I might just have some success! LOL!!!!!

@FishinNStuff

4 жыл бұрын

Thank you for watching brother , yeah you can do anything you put your mind to doing . Honestly I've wanted to try it a while myself haa , thank for commenting brother

@bowfin6329

4 жыл бұрын

Yep I might can do it now too lol

Man that was truly awesome. I am not going into business making these but I am sure as heck gonna make a few for myself! Thank you for the video.

@FishinNStuff

2 жыл бұрын

Yes Sir , thank you for watching

Awesome DIY. Great job. Enjoy watching your videos. Keep up the good work. Thanks for sharing.

@FishinNStuff

4 жыл бұрын

Hey thank you pop , I appreciate you brother and I hope I get to see you at the CatCon this year buddy

Great Job on the rod holder keep up the good work.

@FishinNStuff

4 жыл бұрын

Thank you brother I appreciate it

Very good video on DIY rod holders for those with the resources and extra time. But time is a commodity and I realize why he is not making them for sale and prefers to buy his from Monster Rod Holders. This is an intelligent, and creative young man who has a beautiful southern accent.

@FishinNStuff

3 жыл бұрын

Thank you , that means a lot . Really you don't save much money unless you buy the material in bulk quantities. There's good DIYS and there's some that it's better just to buy . I only made one because people asked Thank you for watching

That is pretty dang awesome, that press sure came in handy. Great video Brother. You got some talent. Keep the videos coming Keith.

@FishinNStuff

4 жыл бұрын

Thank you buddy I appreciate the compliment , that press is an awesome tool no doubt, the more I use it the more ppl will see why I built it lol

Brilliant job. Great video as always great standard.👏👏👏👏👏👏👏👏👏

@FishinNStuff

4 жыл бұрын

Thank you Sir your comments are always welcome lol . And I always enjoy reading them

Great job!

You are a very Smart man ! I enjoy watching and learning from your videos ! You help the small fella save and make some really nice things that can cost a whole bunch of money ! Thank you again and again !

@FishinNStuff

3 жыл бұрын

Thank you for watching. , other wise there wouldn't be a reason for me to make videos

@larryking606

3 жыл бұрын

👍🏻👌

you are awesome. found your channel last night and sent this to my fishin buddy. you make me laugh and think. a rare combo indeed. i have been jury rigging (making) stuff all my life. keep up the good work. thanks for your wonderful videos.

@FishinNStuff

2 жыл бұрын

Thank you I appreciate you watching and sharing it too

Love all your cool stuff ,keep up the AWESOME videos.

@FishinNStuff

3 жыл бұрын

Thank you

Such a great looking rod holder 👍🏽

@FishinNStuff

3 жыл бұрын

Thank you Sir

Love these rod holders and the price is the best ...

Thank you for the awesome video I'm gonna work on making a jig and making a few now for my boat

@FishinNStuff

4 жыл бұрын

I believe you'll like em brother . I really do , thanks for taking the time to comment

Dude every video you've made has been an exact solution to my fishing problems. All my fishing equipment I've had to settle for cheap quality. But not with these videos. Now my problem is I have to find time to do all the DIYs. Keep the videos coming. #subscribed

@FishinNStuff

4 жыл бұрын

Thank you Travis , I appreciate brother

@travispoindexter7471

4 жыл бұрын

@@FishinNStuff I sent you a message on Messenger. Had to a question to ask.

@FishinNStuff

4 жыл бұрын

Ok 👍

Great job as always buddy. You da man!

@FishinNStuff

4 жыл бұрын

Thank you brother I appreciate you man

Awesome video. I'm going to try making some for my boat.

@FishinNStuff

4 жыл бұрын

You can do it they want to twist if your not careful , just take your time buddy thanks for watching brother

THATS AWESOME. GREAT JOB. SIR

That turned out perfect. Having the tips higher good job. Yea I love the way them are made and I follow his channel he loves the big cats to. Ide love to fish once with him. But that's never gonna be in my budget as the rod holders I can't see spending that much money on me. I was single parent 17 and half years. Ide get my daughter anything she wanted but me if it wasn't cheap or used ide do without. But there nice if I had welder again mine was taken when my dad passed just little wire welder but being disabled all these years if I needed something ide try to make it or do without. My money went to my daughter and my fishing group. Even my rides I tryed to do trades so it didn't cost as much. Or ide sell my stuff till I had enought then get it. But yea years ago ide made them in heart beat and prob sold also get my money back 2 to 5 dollars for me. Never made much on what I sold. But great vidoe again for the first time dude perfect. Great job. Keep it up and yea I'll go watch the one we're you painted. Them looked nice. Have a wonderful week. God bless

@FishinNStuff

4 жыл бұрын

I know where your coming from brother I was a single Dad too until I met my wonderful wife I have now and I definitely get it , and I made a lot of stuff when I wad young but never got much for any of it lol . But you learn stuff doing that brother. You should look at those green welders at Harbor freight they say they work really well . I appreciate you watching my friend and I hope God gives you a blessing so big you can't receive it all

@heathschwab

4 жыл бұрын

@@FishinNStuff thanks and that's cool you found your new wife me it will never happen again had to give up. But that's cool more time to fish and give lol. But yea that's what I had was one from them I'll save to get another one day. But till I can got to save for the helmet and gloves and what ever else I'll need and if I'm able to get me a better ride mine died and a camper to live in and travel little bit while I'm able to drive. I'll save and get one and as I travel I can make and sell. And the KZreadrs I'll be traveling to to go fishing and to give the gear I have away to the kids anything I make and sell will find me buying fishing gear to giveaway. So can't weight just hope I get the camper my cargo trailer kinda small to live in. Lol. But camper or no camper I will live in something to drive around or pull cause that's my last dream to follow before it's over. Just pray it's sleeping in something that will hold me. Lol. But I'll keep watching and learning love diy fishing stuff makes me think. Keep it up bro. And gods there always and he's good he'll show me my way I just got to listen to the right way. God bless.

That looks good nice job

@FishinNStuff

4 жыл бұрын

Thanks brother , it did turn out too bad . I appreciate you watching and commenting my friend

Great video

This is the video I’ve been needing!!! Now I gotta explain to the wife why I gotta go to the hardware store tomorrow morning! 😂😂😂 awesome job as always brother!

Fantastic stuff plenty ideas

@FishinNStuff

4 жыл бұрын

Thank you brother

Great imagination, awesome talent, Thak You for your unselfish knowledge!!!

@FishinNStuff

2 жыл бұрын

Thank you for watching and for your unselfish comment. Your awesome

I love your videos! Thanks

@FishinNStuff

4 жыл бұрын

Thank you man , that means a lot to me !

The rod holder project - "NAILED IT " . . . for a first try!

@FishinNStuff

4 жыл бұрын

It turned out petty good did it 😆

Very cool, nice job

@FishinNStuff

4 жыл бұрын

Thank you brother I appreciate it

Great video I also have monster rod holders and the one you made lookjust as well made if not better. 👍👍👍👍

@FishinNStuff

4 жыл бұрын

Thank you brother , hey I appreciate you taking your time and leaving me a comment. And thanks for watching buddy

Hey , Big Challenge for you !! Make a Fly fish'n holder , I 'd love to see that ... Take care .

That turned out real good. I like how you made those tops taller. I've had the same thought at times just looking at the angle and wondering if the rod would come out if I got a hit at just the wrong angle. So far it hasn't happened, but I've definitely looked at it and worried a little bit. I guess you could put some kind of stop around a post to keep the rod from sliding all the way up to the top and slipping over but longer is easier if you're making them yourself from scratch. Once again, you DIY a winner! Oh, does your wife know you're playing around with fire in the garage? 😂👍💯

@FishinNStuff

4 жыл бұрын

Nope and don't you tell her lol . Ive got a RodRack now so that should never really happen again but pulling rods side ways it will happen , could have been because my old boat set so low to the water

Your videos are always so interesting and entertaining great stuff. Love it dude

@FishinNStuff

2 жыл бұрын

Thank you very much I try . I appreciate you taking the time to watch em

Great DIY. Steve Douglas would be proud of ya!!! Looked great

@FishinNStuff

4 жыл бұрын

Proud or mad im not sure lol . But I got ti think about my viewers lol . All's fair in DIYs I guess lol thank you buddy

@timcoffin2790

4 жыл бұрын

Steve isn't worried about diy rod holder makers. It costs more in time and material to make them yourself. Just like building car's cheaper to buy one already built. If you have the skill and equipment your doing it for personal satisfaction.

@FishinNStuff

4 жыл бұрын

I would have to disagree with you there 2 dollars for the 3/8s rod and 6 dollars for the plasti dip is hardly costing you more than 22 , but that 22 dollars gets you an awesome product, but it's still not cheaper.

@FishinNStuff

4 жыл бұрын

@@timcoffin2790 you are right a bout buying a car is cheaper than building one though lol . I personally know ppl that will never own a heavy duty Rod holder like that if they have to pay 240 for 12 of em . Buying is easier than building though

@timcoffin2790

4 жыл бұрын

First I wanna say thanks for you posting your awesome video on how to replicate the monster rod holder. I don't want to post negative stuff. I subscribed after watching the video. I put some value on my time. Gallon of plasidip is $60. Never thought the aerosol cans would give a good result. I just hate buying something and the majority goes to waste. I like to see the methodology people with more experience fabbing go about projects like this. I have a mig, torches,2ft square steel plate, big vise and a swing press (bfh)for small projects. I believe in K.I.S.S. but I sometimes drag the kitchen sink with me anyway in more ways than one. Especially when going fishing. I still like my machete rod holder maker too.

You one cool dude. Keep it up!

@FishinNStuff

4 жыл бұрын

Thank you brother, you one cool dude too for watching thank you

Glad I found your channel, I love to make my own stuff and you have some cool ideas!!!! You ever fished lake norman, thats my stompin grounds lol

@FishinNStuff

4 жыл бұрын

Ol yeah that's mnt stomping ground too , I live close to Moss Lake but I love Norman the best. I fish it for crappie and Hybrid and catfish , I fish Wylie sometimes . Where you live at brother

@ACDesignsGarage

4 жыл бұрын

@@FishinNStuff mooresville NC

@FishinNStuff

4 жыл бұрын

Ol you live near my buddy Steve . His channels Adventures Outdoors. Got tell him I sent you over there too be nice too ya haha . It's always nice to be near other KZreadrs

Good job!

@FishinNStuff

4 жыл бұрын

Thank you Sir . I appreciate that brother

Great video 👍🏽👍🏽

@FishinNStuff

4 жыл бұрын

Thank you Sir I appreciate that brother

Whats going on my brother!!! Good to see you doing your thing! Great video Great Inspiration! I been out the loop for a minute but im back at it my brother!

@FishinNStuff

4 жыл бұрын

I was wondering where you where at man I missed ya lol . I looked on your channel a couple weeks ago to make sure the bell was still clicked . I'm glad your back buddy

@crappiesniper

4 жыл бұрын

@@FishinNStuff lol yes sirrrr!!!! We are back rolling ... Had too much going on at the same time 🤦 its good to know someone is cares out there lol thanks for your concern and support brother.

great channel ! i will be making some of the pvc ideas..

@FishinNStuff

4 жыл бұрын

Thank you brother , I'm planning some more stuff already

awesome 👌

Dude, another really cool video. I ended up going with Fish Bite because they were easier to order and the customer service was AMAZING! FISH BITE- "LET 'EM PULL!"

@FishinNStuff

4 жыл бұрын

Those Fishbites are friggin Awesome Rod holders, that's why I could leave them out of this video

Good job. Brother.

@FishinNStuff

4 жыл бұрын

Thank you Jeff , man ourr was so easy and so aggravating at the same time haaha

@bowl830

4 жыл бұрын

Fishin N Stuff I made all mine for years. To cheap to buy them. But now I have all Fishbite. He gave me a bunch a few years ago. I love them

@FishinNStuff

4 жыл бұрын

I like those Fishbites too man but I already have Monsters lol ,,,,, too cheap to start over haha

I've already made the break press. 12 ton press not quite strong enough to bend the rod I tried to use. tried to repurpose one of them flower pot hangers lol but I got me some rod going to give it another shot. Probably make some of them planer boards next really enjoy your videos. I had to look through the comments to see if somebody ask measurements I was guessing

@FishinNStuff

4 жыл бұрын

On the balsa wood planerboard I thought I gave all the measurements on the video , but I'll help you any way I can buddy I appreciate you watching brother

@chrisyandle2910

4 жыл бұрын

@@FishinNStuff I was looking for the measurements on the rod holder but I found where someone asked and you got them for them appreciate it

Great video! Proof yet again that you're better off ordering a set from Steve Douglas at Monster Rod Holders than doing all that work....LOL!!! I really love your channel......BTW, I got you a t-shirt....

@FishinNStuff

4 жыл бұрын

It's about time lol . Hey Dieter everyone keeps saying it cost more and it's not worth making them , well it don't cost more for sure and it was well worth me making one lol , thank you buddy

I really enjoy your videos. I just bought a pontoon and think I'm going to make some of these holders. Your work is amazing. Could I possibly get the measurements on where to locate the bend lines? I like all your pvc rod storage holders too

Good informative video

@FishinNStuff

4 жыл бұрын

Thank you brother ,,,appreciate you watching and taking the time to comment

found this channel was looking for dyi man I do have to say iam very much impressed with your ideas.. way to go keep up the great work thankes

@FishinNStuff

3 жыл бұрын

Thank you

@sesarlara9550

3 жыл бұрын

I was wondering do u have any good dyi ideas on how to make the Alabama umbrella rig iam n Texas an just trying out stripper fishing... I hear that's great for strippers an help would be great thankes....

@FishinNStuff

3 жыл бұрын

@@sesarlara9550 I've planned on making one but haven't yet

Great Stuff Man! I’ll take four for my new boat. Just subscribed also!

@FishinNStuff

4 жыл бұрын

Thank you Sir , i appreciate that

Bad ass man 💪💪

@FishinNStuff

4 жыл бұрын

Thank you Kris

FYI...they sell plasti-dip in smaller 10 ounce cans the you can either dip or paint on..Great video, thanks. Cheers from. Canada

@FishinNStuff

4 жыл бұрын

I know we have em . They are 6 us dollars but it's way to small to dip with , you would have to pour it over it I guess . The plasti dip spray cost the same as the 10oz cans . I appreciate you watching and commenting buddy .ol and greetings back from the US brother

Rod holders look great, like to see make some for kayaking, I have a feel free moken

@FishinNStuff

Жыл бұрын

You can use those for kayaks . Alot of people do

Thank you

I don't think you emphasized enough that you're not starting a rod holder business LOL Good looking holders, and well done video my friend 💪

@FishinNStuff

4 жыл бұрын

You ate correct cause I already have ppl trying to buy something hehe , it's ok though . Thanks brother

I have been watching quite a few of your DIYs I find them very interesting and informative I was wondering how would I go about figuring out how long of a piece of cold roll I need to build a Smackdown style rod holder

@FishinNStuff

3 жыл бұрын

I would measure one if you had access to one and always start with more material than you need , you can trim it off before you weld it

Good job

@FishinNStuff

4 жыл бұрын

Thank you Sir

You could probably put something like marker lids or something along those lines on the tops then dip. No scratches for sure. Just a thought. Great rod holder tho !!

@FishinNStuff

4 жыл бұрын

Thank you brother, your idea might just work

I just got done with building your press brake and the rod holders great videos by the way and I was wondering why you didn’t use the press brake for the back bend instead of the pipe. I used the press brake and it turned out awesome lol

@FishinNStuff

4 жыл бұрын

You can , I thought about making a die just for them so they would come out the same every time , I was just showing 2 ways to do it , cause you can do the bends with a torch too . , send me a picture if em lol Keiff32@hotmail.com

You can do it! Been there ,done that,I made 24 at one time,20 years ago....made that same jig,i used my cutting torch to bend it,that cutting torch will bend anything! .used the dip and it stayed on good, but after 20 years they looked ruff so I tried the spray,didn't like it! and it only lasted a few years and started peeling. i dont use them rod holder any more,i went to the fish bite holders,and for the price... i figured I would do just as good buying them as trying to make them.If you like making things and have the time to put into it, go for! i just dont have the time now days to put in to it.Good video.

@FishinNStuff

4 жыл бұрын

I know what you mean brother that's why I only made 1 lol . I agree 100% with you the spray works but the dip is a lot better

You can dip them in flex seal

Hello from Australia, I like how you talk, it makes me feel like snappin' and breaking some shit.

@FishinNStuff

4 жыл бұрын

Haha please dont break nothing on my account lol . I appreciate it,,, I think haha

@jonnywaselectric

4 жыл бұрын

@@FishinNStuff lol 😁

@FishinNStuff

4 жыл бұрын

I appreciate you watching brother

@jonnywaselectric

4 жыл бұрын

@@FishinNStuff thanks, happy fishing

You are great man Thank you for sharing your video 🎩 😁 👕👍Great! 👖

@FishinNStuff

4 жыл бұрын

Thank you buddy

Freaking awesome! Instead of plastidip you could use spray on bed liner.

@FishinNStuff

3 ай бұрын

I believe that would work . The wrist part of this project it the coating . It maybe worth buying a gallon if you were making enough of them . Dipped rodholders are much nicer

Can you do a video on how to learn how to weld? I've never used a welder. love your videos brother

Nice job. I make them also.i bought the grizzly tube bender it works great.i swear by the fishbite rodholders

@FishinNStuff

4 жыл бұрын

That's Awesome, I started to use a bender bit I was trying to keep it as simple as I could , cause a lot of ppl don't even have welders . But I did think about that . I bet yours look better than mine using that bender to do it

@mr.diyhowtopaintingwelding4479

4 жыл бұрын

@@FishinNStuff at first mine were horrible I wasted alot of material but they have gotten better.i mostly make land rodholders and sell them locally

@FishinNStuff

4 жыл бұрын

Ol I know I've bent stuff before it can get twisted lol . But you get the hang of it ,, I guess haaha

@mr.diyhowtopaintingwelding4479

4 жыл бұрын

@@FishinNStuff if a guy dont have a welder.you can.make all the bends on a vise

@FishinNStuff

4 жыл бұрын

@@mr.diyhowtopaintingwelding4479 that's true man , no one every said you have to make that exact rod holder it's about the idea 👍

Just a friendly heads up guys...When welding on galvanized steel, you have to ventilate or be in an open area. The fumes released from the zinc coating are very toxic.

@FishinNStuff

4 жыл бұрын

Your right I wear a respirator when I paint or weld galvanized but I don't weld it much but wer do at work . I never do though lol I run a Robot

@josephpacheco7508

2 жыл бұрын

If by chance you do get Galanized poisoning, you will get a migraine commonly as well as your muscles will feel very tense. I learned from a 80 year old man with about 60+/- years of fabrication, drink a glass of milk before hand. It'll reduce the chance but please, do be smart and take a few seconds to put on a respirator or mask of some sort at the least and open doors. Turn on fans.

Can't beat making what you want and modifying it with tweaks to make it better than what most spends way too much money buying...... Excellent edit..... When are you gonna slime up that boat?

@FishinNStuff

4 жыл бұрын

Soon brother soon lol , I've been super busy I have been a coke times well 3 times and wer fished some but mostly just doing the break in stuff

Hello, I think this rod holder is great. I would like to know what the dimensions are to be able to reproduce it, is it possible to have a diagram or a drawing with the dimensions in centimeters or inches please thank you and that's great what you make.

With the finished product how much cold rolled did it take per rod holder ? I really enjoy all your videos .

@FishinNStuff

4 жыл бұрын

I'm not sure , that one was just an experiment so lol , I'm thinking just under 3 foot maybe . I cut it a little on the long side because I'd never bent one before , but used the excess I cut off as the cross pieces so it was ok .I really thank you for watching buddy . I think when I bought that rod I paid 47 cent a foot sho I figured 1.50 wasnt too bad . It took a whole can of plastidip spray for 1 rod holder so that's 6 dollars

Do you have a D I Y for something to lock your boxes on your boat like rod boxes compartments etc. the one to replace the ones that came with boat are very very expensive. Thank a You Sir!!

@FishinNStuff

3 жыл бұрын

No I haven't done that

I know your great with random boat diy stuff so.... I was wondering if you could show us how to diy a drain plug with led's? Would like to build a pair to put on the boat for my kids but the only good ones I see cost over $100

@FishinNStuff

4 жыл бұрын

I've looked at those too . I found some for 74 bucks . And ive thought about that and I'll think some more on it but , I would hate to be responsible for someone's boat sinking if they did something wrong , I could see the comment section now lol . But I'l still think about it buddy . Night fishing is almost done here for the year wer may have a month left . I've got a few light ideas im thinking about but it might be the wrong time too post em I don't know

Where did you get the rail that you mounted your rod holders on at the back of your boat ? at time stamp 13:50

@FishinNStuff

4 жыл бұрын

I bought it with the boatt it's a seaark Cat Rack

Got any ideas about making a diy versa track system ?

@FishinNStuff

4 жыл бұрын

I've been thinking about that one because I've been asked before . I'll have top do a video on that soon

if you find you get a crack in the weld where it joins to the stainless bolt you will want to change to a stainless steel electrode. Typically you use a 309L or 316L material when joining stainless steel to carbon steel. Sometimes welding with carbon steel filler on stainless steel will cause it to crack due to dilution.

@FishinNStuff

4 жыл бұрын

You sound like your an expert welder buddy 👍

@TheKajunkat

4 жыл бұрын

Haha, even worse. A welding inspector. I ain't gotta know how to weld, just point out how your doing it wrong, ha!

@FishinNStuff

4 жыл бұрын

I eased an inspector buy I went back to running a robot welder ,

Did it take the full 4 and a half foot of rox for that one holder?

If you almost lost a rod out of a monster rod holder you should figure out how to make look down on the end of one that you can remove quickly so that a fish or if you get hung on something rod won't come out .

Have you used this holder you made and is it plenty strong being 3/8" campared to the monster ones which are 1/2"?

@FishinNStuff

4 жыл бұрын

I haven't had a chance too fish with it , i finished building it Thursday , bit its plenty strong enough. I mean a 1/2 will be stronger obviously but it's as strong as a Fishbite which are 3/8 as well I'll be using it soon . Personally I don't see how any fish could break it . I think Steve prides his company on overt building em I used 3/8 walmart rod holders and caught 50lbers and never bent one . That rod holder is extra strong with the welded cross braces . Just make sure your welds are burnt in good

@FishinNStuff

4 жыл бұрын

Basically what I'm trying to say is your rod will break before that rod holder does

What are the measurements on the bend lines?

Yes Sir let me start by saying awesome video and I'm about to build me some of them but is there any way that you know the measurement from each bend if so let me know and thank you sir

Do you have a DIY video on building a 10 rod holder for a receiver hitch that will accommodate a 70 qt cooler and a large Plano tackle box?

@FishinNStuff

9 ай бұрын

No , do you mean something that installs in your trailer hitch?

paint on truck bed liner would work as a coating, wally world has it

@FishinNStuff

4 жыл бұрын

I could , I've always thought of it as something that needed to be soft . But it really doesn't matter the rod handles soft so I agree with you

where did you buy the round bar that's holding your rod holders?

@FishinNStuff

4 жыл бұрын

Are you talking about the Rodholder Rack on back of the boat ?

Nice build, I’m gonna give it a shot, I might Powder coat them. Really durable and probably cheaper.

@FishinNStuff

4 жыл бұрын

That's a good idea let me know how that turns out man , a picture would be even better keiff32@hotmail.com

This channel is a therapy after a big argument with my wife... Just to piss her off I said; Come sit down here and watch the show with me... Yeeeehah!!!!

@FishinNStuff

4 жыл бұрын

Well I hate you guys are arguing. And i do mean that . But I'm glad you watch and enjoy it . I appreciate it

@equinoxfishingteam5837

4 жыл бұрын

Fishin N Stuff Hahahahahaha!!!

What type of welder did you use for this project? Could you please list this in future videos?

@FishinNStuff

3 жыл бұрын

I used a mig welder.

Can you make some from PVC? I'd like to see that.

@FishinNStuff

4 жыл бұрын

I am working on a new pvc video , but I've not figured out how to make a really really good pvc rod holder , but I will