Throwback to almost 4 years ago beardless baby face bob who wasn't near as enthusiastic as he is now 😂😂 I love watching this channel grow.

thanks so much for the encouragement! I hope you're enjoying them!

Fantastic!! I think mine will hang on my shop door...but it will say "GO AWAY" :D

@enzovanbergen815

8 жыл бұрын

😂😂😂

Look it's fetus-faced Bob, too good for this world, too pure.

Am I the only one who is completely addicted and in love with Bob? ;)

Damn Bob It's Crazy Going Back And Watching These Older Videos

I think I might spend the rest of the night watching your videos!

Watching this old video, and just feels like you need a huge hug.... What a change since your beggining !

Even though this video is 4 years old the production value is still amazing. You're one of my favorite channels!

Bob without a beard it’s unheard of

You grew into your enthusiasm quite well. I like to see how people start and how they become more comfortable with themselves.

@myhomeclip It was a seasonal product, and it's not available online unfortunately. I did find a similar spotlight recently at Big Lots though, so you might want to check there!

@the_m34

8 жыл бұрын

U where tired at the end weren't u bob

@the_m34

8 жыл бұрын

Nice DIY tho

@meloniestory4223

8 жыл бұрын

can you .

@meloniestory4223

8 жыл бұрын

can you make it say what ever you want

@chinevardone914

8 жыл бұрын

i love this channel

he looks so depressed in the old videos

@seansides5192

6 жыл бұрын

Henrik Techguy yea 😂😂

@jackphillips5745

6 жыл бұрын

I know right!

@garyclement818

6 жыл бұрын

It’s the lack of beard, I’d be depressed too.

@a.b.b.181

5 жыл бұрын

more like bored. the beard today looks way better :-)

@hunterbowman4207

5 жыл бұрын

and his glasses are gone and hes a no beard

I gave you a thumbs up for reusing the screws that came with the light. #NeverThrowAnythingAway!

man.. this came out lookin baller.

This just cover up on my recommend.... what a young baby face Bob 🤣😂🤣😂

WOW this video is how i discovered your channel and it was fresh at the time I subscribed and have tuned in every week since great job dude. Keep up the hard work but never forget family is always number 1.

As a voice-over guy who also likes to make stuff, I enjoyed your remote on-air light build. I think I'll use the idea.

This is dope! Think I’ll try this!

Dandy! That's pretty neat. Very creative.

omg haha i am rewatching your vids, but you changed so much. you dont sound that motivated in the beginning etc ;)

Great work, thanks for the inspiration!

Wow! Impressive, thanks!

I love watching your videos Bob! The quality and the content is so great it kind of reminds me of the show "How it's made" on Discovery Channel which I watched over and over as a kid. You truly inspire me to get going. Keep it up (y)

@Iliketomakestuff

8 жыл бұрын

+Casper Jonathan Thanks so much! That's awesome to hear!

The level of change between then and now is amazing. You are a different person. This is still a good idea. My son likes to do Lego movies for his channel. I've thought about getting him a hot set/on air box when he is making a video.

impressive. Thanks

cool project

great work my friend very wise

jajajajajajajaja nice job!

its superb man

I love your videos Bob

How do u dislike these things?!?! This is incredible! So creative! Probably makes lot of money from selling these things if he does!

Nice project by the way☺️

You make awesome stuff!!

easy bro.... Good making stuff... nice

Really cool stuff man. Keep it up.

brilliant!!

You the best on youtube

Cool. Great info, thanks. Subscribed.

OMG I love you. I wish I was handy like this.

Great video. Thanks.

loved it

Oh My God! Bob before the beard!!!!!

Love your vids!

that was ....inspiring! thanks yo.

really cool vids i think you're my favorite youtuber now

Love it. Like your vacuum machine. Thats something I need to build before I build the on air sign lol

Thats cool!

Awesome !

It wasn't converted. I just cut the wire so that I could run it through the wall. once it was reattached, I just plugged it into the remote receptacle (which was plugged into the wall.)

jamming!! very inspiring and i like your attitude. this is about having fun.

@Iliketomakestuff

10 жыл бұрын

Thanks! I totally agree, this should be fun!!

That's really cool. You could you the same system and run it on a timed circuit so it comes on at dark time and goes off in the morning, with your house number on it, it would make it easier for guests, pizza man, taxis or ambulance to find your house if there is a need, and not all houses have their house numbers visible, so it can be hard if you're trying to count.

sooo cool!!!

that was awesome!

So many nice tools ^^

I just subscribed because of your DeLorean shirt.

I wish i had everything i needed for that THATS AWSOME

Cool!

Nice!!!

Awesome

I'm just so ridiculously never going to go through all this that I had to subscribe!

Great video.

@Iliketomakestuff

10 жыл бұрын

Thanks Travis!

This was awesome to watch. I'm actually a voice over guy and work in my own booth in the house everyday and have needed an on-air like light this for a while. Unfortunately I'm so busy I don't even have time to build one :(

@WishingChainPlays

7 жыл бұрын

Steve Summers I was gonna make one but I don't have half the tools he used :(

@fthurman

Жыл бұрын

@@WishingChainPlays Exactly the same boat here.

SIMPLY , SPECTACULAR FRIEND , I stood drooling WITH YOUR BANK AND TOOLS YOU FRIEND CONGRATULATIONS OF THIS .

Thank you young bob

oh my, it's baby Bob!

Great Job Bob! Saved Me Over an $100

@Iliketomakestuff

9 жыл бұрын

Djstylez memphis Sweet!

Wow, 5 seconds in.. you have amazing camera quality.. anyway on to watching the content.

WOW I am so going to use this when i get the chance to build it! I really needed one for when i record my game play on youtube! Thanks a ton!

@gavingates9308

9 жыл бұрын

So then my brother doesn't come in and disturb me anymore :D

@WeirdintellectualMlOfficial

9 жыл бұрын

You should try locking the door too xD

thats so cool! O_O

Hey, Bob, do you get a lot of "Bob the Builder" jokes?

@Iliketomakestuff

9 жыл бұрын

Angela Hsiao yes... yes I do. :)

@CJBurkey

9 жыл бұрын

Angela Hsiao I've seen like 5 of these comments. I think they're used more than Bob the Builder jokes XD

Cool

Wow Bob, your videos really do inspire me! Been binge watching them for the past couple hours :D The only downside for me is to begin without all your tools and equipment. What would you recommend, between keeping it low budget or investing in a few key tools first?

@Iliketomakestuff

8 жыл бұрын

+Vincent Ghyssens Thanks! First, I'd get a circular saw and a drill. Those will get you pretty far. First project? make ssome saw horses so that you have a raised surface to work one that's also portable. Next up, an orbital sander and possibly a jigsaw.. Good luck!!

This is gonna be useful to me...

please consider a project with Kydex, thanks for all the vids keep it up!

SIMPLESMENTE, ESPETACULAR AMIGO, FIQUEI BABANDO COM SUA BANCADA E FERRAMENTAS, VOCÊ ESTA DE PARABENS AMIGO.

Nice video. If you were to make another one would you use the LED light strips from the pallet wood logo video, or stick with the spot light? Thanks for the creative ideas

thats LIT man. good job.

@lukecoxhead7683

7 жыл бұрын

brocos tutsamanki lol Badum tsss

@DoctorRose

7 жыл бұрын

ayyyyyy.

I noticed that the light from the LEDs were concentrated towards the center of the sign. I think if you used an opaque sheet in between the plastic form and the LEDs, you could evenly spread the light throughout the sign. Just a thought

@michaelpaulmcdaniel8870

2 жыл бұрын

With all the tin foil, mounting down shooting up would give a better light spread throughout, without changing the build. Notice he didn't give a long look at it lit up. Great job Sir, especially the mold!

That was REALLY well done. Silly question, unrelated, I know. But what kind of watch are you wearing?

un hermoso trabajo sin duda le pediré uno a santa

Or, you could of used a LED strip.

Great idea perfect for me I stream mlb the show 15 on twitch so that would actually be very useful. To bad they don't have those lights in red LED.

Very cool video brother. Just found out I'm gonna be a dad. And we've decided to name him Lyric. Needless to say, music is big in my family. But I was thinking of making this for his room. Maybe as a bedside nightlight. And one for my studio while I'm at it lol. Also think I will vac form 5 of the 6 sides of the box at one shot. Leaving only the back of the box to complete. Thanks man.

@Iliketomakestuff

7 жыл бұрын

Congrats!! Kids are awesome :)

Do you have a video that you making a Awesome Desk!

I love your videos I'm from Australia can you make like a USB charger that doesn't need and power point

Sir u should show the finish product for longer time this is great I just wish I saw it lid longer

Hi Bob.You are awesome.i will go to U.S.A the 14th of May. I will go to New York and Boston. Hope I see you

@Iliketomakestuff

9 жыл бұрын

Lars Lengquist Hey Lars! Enjoy your trip to the states! I'll be in California during that time at Maker Faire.

If you are taking in ideas, I have a hole in my airbed, 7, I need a remote made for an air bed built in pump. Have any suggestions?

What do you think about updating this to use Arduino and some LED strips?!?!

Use this during a live stream

@sterlingsilver8148

7 жыл бұрын

+Landen Keller That's actually is a great idea!

I come from 2017, your videos are so different.

Hello bob I have to question I wonder which using plastic of print. what is the name thats material?

Hey Bob, where did you get the clear plastic sheet? And how much might that set me back💰

How long did this take?

Hi, what was the brand and model of your saw ??

where do you find the plastic sheets ? I would love to make the light !

Your fantastic, very creative! I hope you patent your ideas like the I pad cash register or the digital wooden clock it would be a shame if some large company stole them from you.

@2500204

9 жыл бұрын

You're*

@magoxide7777

9 жыл бұрын

Shashwat Gupta Yes, I realise I spelt "you're" wrong. however as this is the internet and not an English class it doesn't really matter how I spell it. I will continue to spell it your. so go fuck "your" self

@stickerz7948

8 жыл бұрын

+camdog You don't have to be like that. Calm down.

You look awesome in Beard Bro :)

God I fucking love this channel