how to make a pulley on a lathe ? how to make a v belt pulley ? ( tornada kayış kasnağı yapımı)
I wanted to show you how I made v belt pulley on a lathe. I hope you will find it useful. would you subscribe ? #crane #lathe #lathework #machining #mechanic #mechanical #pulley #torna #usinagem #construction #belt #vbelt
Пікірлер: 58
Сделанно все хорошо! Но есть таблицы по профилям ремней,и шкивоф! Думаю было бы проще опредилить тип ручья и сделать по таблице
@CallutLathe
Жыл бұрын
Thank you,i looked at is 3142, don't worry😁
Beautiful work!
@CallutLathe
Жыл бұрын
Thank you 🥲
Thanks
Nice work👍👍
Great 👍
Супер. 👍👍👍
Muito bom
Wow 🥀🍂🌹☘️🍀🌷🌺💐🌿🌿💐🌴🪻🍁🍄💯🦋🪴🍓🍓🍄🍁🪻 good job
@CallutLathe
10 ай бұрын
Thank youuu 💐💐
Parting tools have always been a pain in the neck for me. (They seem to always break easily) How are you cutting those angles with a parting tool without breaking it off?
@CallutLathe
Жыл бұрын
I give the rate of progress constant and slow. if it doesn't work that way, you can also do it by turning the cutting tool upside down and running the lathe backwards.
@drreality950
Жыл бұрын
@@CallutLathe Thank you for the reply.
@mallyuk1
Жыл бұрын
@@drreality950 Thats ok if you have a bolt on chuck, Not a screw on chuck, You most likely know but thought id just say
@paulmiddleton4215
11 ай бұрын
@@CallutLathe why do you hang that tool out so far? and why such a narrow tool. they make wider tools[stronger shanks also] that pissant 3/16 insert takes forever and deflects too much. the groove can handle a 5/16wide insert.
Wow beautiful kk videonya 👍 tetap semangat
@CallutLathe
Жыл бұрын
my friend, thank you very much 🙂. you can subscribe for more videos👋🏼
Excellent job
@CallutLathe
Жыл бұрын
Thank you. You can subscribe for more videos
👏 👏 👏
Like how to make pulley on lathe thats a v belt goodtutorial
@CallutLathe
8 ай бұрын
Thank you for your compliments.😊
Good
Good job 👍
@CallutLathe
Жыл бұрын
Thank you 🙂👋🏼
Very nice channel >> keep going
@CallutLathe
Жыл бұрын
Thank you 🥲
how did you machine to the jaws without hitting them so precisely
Very good 👍👍👍
@CallutLathe
Жыл бұрын
thank you
Allah razı olsun.
@CallutLathe
9 ай бұрын
Takıldığınız yer varsa memnuniyetle cevaplarım.
@moturcu4226
9 ай бұрын
@@CallutLathe Sağol usta bu video yetti.
where is this city
Hocam kolay gelsin. Öncelikle elinize sağlık. Triger kayış kasnağı üretiminde üretim diyagramı yapmam istenildi okuldan. Üretim aşamları nelerdir sırası ile? Yardımcı olabilme şansınız var mı?
@CallutLathe
7 ай бұрын
Öncelikle teşekkür ederim. Triger kayış kasnağı hakkında bir bilgiye sahip değilim. Yapmış olduğum v kayış kasnağı da bir elektrik motoruna ait, ve tecrübelerim dahilinde yaptım. Yardımcı olmak isterdim ama bilgim yok maalesef
😍
@CallutLathe
Жыл бұрын
👋🏼👋🏼🤩🤩
😁👍
@CallutLathe
Жыл бұрын
🫶🏼
Nice job bhai
Misię podoba, dawaj dalej.
@CallutLathe
Жыл бұрын
thanks.thank you very much 👋🏼
2024년에 아직도 범용선반으로 풀리 깍는 영상이 보이네 근대 cnc에서 풀리 가공 영상이 없다는....
@CallutLathe
Ай бұрын
in fact, the logic of processing materials proceeds in the same way. it sounds logical to write the coding according to this processing logic.
Use the automatic turning
@CallutLathe
9 ай бұрын
Maybe someday I will.💸💸 😁
Plonger en 2 fous pour éviter que l.outil talonne et finir les gorges avec un outil de forme pour gorges de poulie
Dobro, ali mislim da si mogao ukopati još malo dublje da kasnije zbog istrošenosti kaiša ne bi kontakt bio unutrašnji deo kaiša sa remenicom.
@CallutLathe
10 ай бұрын
i did it according to the is 3142 rule. but it can also be done as you said.🤗
Location
@CallutLathe
Жыл бұрын
İ'm in your heart😌. We are in turkey.
Неправильно канавки сделаны. Не по ГОСТу.
@CallutLathe
Жыл бұрын
it works smoothly under 36 tons of pressure. if we make the channels to the same extent as the belt, even if we stretch the belts, it will turn into a waste. the channels must be tight. thanks
@josip.harasic
Жыл бұрын
That is right. Pulley & pulley groove specification must conforms to IS 3142 & ISO 4183 standards... (or GOST)...
aapka channel subscribe kar liya