How to make a motorcycle backfire!
Автокөліктер мен көлік құралдары
Hi
Feeling childish!
How to make a motorbike backfire.
1. Ride along
2. Hit the kill switch
3. Twisty twisty the throttle
4. Kill switch back on
5.BOOM!!
Do not do this on a corner!
I take no reasonability for you doing this! Im just showing you how it works! _____
Want a action camera like mine?
www.actioncameras.co.uk/
Use code "IAMSPICY" for 10% off!
The code will not work on items already under a offer, But it will with some so worth a try! .
............. If you like what you see and want to support the channel, any support is thankfully received.
paypal: www.paypal.com/cgi-bin/webscr... ------- #spicy110 #motorcycle #vlogger
Пікірлер: 463
how many came here after Time's Square?
@chech5774
5 жыл бұрын
David L x- me!
@iamhenriwilliams
5 жыл бұрын
no stuff sherlock
@1nfamoussoldier359
5 жыл бұрын
Had to hear an example of what it was exactly lol
@JCrtr666
5 жыл бұрын
Was curious myself
@olsenlibra623
5 жыл бұрын
Same. Just saw it on inside edition.
For those who don't know; How it works in a nutshell. Roll along at speed, fuel is ignited by spark as normal. Kill engine with switch, spark dies but fuel keeps entering cylinder(s) Turn switch back on, spark ignites extra fuel, causing a backfire and sometimes flame.
@hohohohehehe6910
2 жыл бұрын
Actually you just described afterfire and not backfire
@marcopozzi522
2 жыл бұрын
This works just with carburator and old injection motorcycle. Today if you press the kill switch it will stop the fuel inition
@romelmeyer3543
Жыл бұрын
This is what happened in my Honda Xr 200 i don’t even know how i did that.
@yxngd4vid941
Жыл бұрын
@@marcopozzi522 well that’s a lie 😂😂😂 New mt07 and r1 can killswitch flame
@alexashby6601
Жыл бұрын
Can’t this damage bike?
Do that while driving buy the local police station. lol
That's one way to get driver's off their phones..
i figured this out on accident didn't realize i hit my killswitch and bike was slowing down, saw it turned it back on and BOOM super loud bang, since then ive done it maybe a bit too much. its so fun hopefully it doesn't hurt the motor because i defiantly abuse it.
For the most part yes, however it is possible with injected engines, but the engine has to be pretty run down. The 'backfire' of an injected engine is usually more of a cough and splutter as the revs are coming down, I get this a lot on my V-Twin 750 Aprilia. A satisfying sound!
Don’t do this in New York.
@Mister_Soyuz_on_YT
5 жыл бұрын
*PTSD Intensifies*
@kcsandeep421
4 жыл бұрын
😁😁
someone in the comments said it depletes the life of the kill switch... thats wrong. at the MSF course they teach people to use the kills witch just to turn the bike off so its pressed like 100 times a day and those bikes have tens of thousands of miles on them. its good to use the kill switch every once in a while to prevent corrosion and make sure it still works incase you need it
@oskykun2198
6 жыл бұрын
But not in gear, you know
@fluttershyryan7913
6 жыл бұрын
100 times is overly exaggerated
@XxSwagBeatboxerxX
4 жыл бұрын
Fluttershy Ryan it’s used by a lot of different people in a day. Totally possible.
@JDMz
3 жыл бұрын
You only need to use the kill switch if in a emergency... thats why its called " kill switch"
@mr.spacemango
Жыл бұрын
@@JDMz Atleast we were taught to use it as a engine turn off switch, else every time i turn the key on, the fuel pump would keep running every now and then..
It may lead to excessive wear in the exhaust system and ever so slight damage to the baffling in the exhaust, but otherwise no, it is perfectly safe on the bike so long as it isn't done too often (:
@tomking518
9 ай бұрын
My bike don’t do it
@JordanMcgill-cm1xs
6 ай бұрын
@@tomking518your doing it wrong mate
watched this vid way back, recently subscribed to you and found this. didnt think it was specifically you. gd stuff. you must do this once again whenever ur next vid will be 👍👍
@JamesThyCool you need to give it a couple of twists of the throttle then turn it back on! Also I don't have the standard exhaust!
@JamesThyCool as i understand it! it dose no damage apart from the chance the massive pressure in the exhaust could damage the exhaust, say its rusty and has a weak point. It could blow a hole! I have heard about someone blowing the baffles out! lol If your exhaust in in good condition then I think the odd one is ok! Just don@t keep doing it all the time! I have not done it for months and months until now!
Prolonged usage will put wear and tear on the ignition, and if you have some poor quality exhaust, there is a chance it might split, apart from that its completely fine
So you turn on the kill switch and then quickly turn the kill switch off while giving it gas?
Lol, look what appears on my you tube feed this morning. Such fun. Cheers Spicy
If you like motorcycles subscribe to my channel, a lot has happened since this old silly video! 🙂👍
@DakanFluff
5 жыл бұрын
lmfaoo
@steeley_
4 жыл бұрын
I just wanted to let you know that aussies call this "Keybanging" Thought you might get a kick out of that ;)
Do You Have To Keep Some Throttle on or do you use no throttle when u hit the kill switch???
Will this work on my ped i dont think it has a carb but it once or twice dont it out of random with a stock exhaust but i dont know how i did it tho but will it work on a ped
So just hitting the kill switch off and back to on position makes it do that? How. Switch does nothing unless he means press kill switch back on like trying to fire bike up
Don't work for me got new bike, but when I let go the throttle you can hear backfire but not very loud need sport exhaust I guess
Why is that so amusing?! Haha
Can you do this while reving and not actually in motion?
or you go buy a large displacement bike and just close the throttle and let the momentum keep the RPM up and get those same pops just A LOT LOUDER
does this work on all motorcykles? so u just drive along, turn of the bike with the kill switch, blip the throttle a couple of times, and when rolling turn on the killswitch again and bang? have i got it right?
First ever video to start at Tescos!
I have a little pocket bike i do this on, it has a little push button kill switch that i tap really fast and it does the same thing. I wanna try this on my KX250 soon. The main secret to doing this is high octane gas and rpm, and a good kil switch.
i know this sound noobish but when i try this do u has to be in N or in drive without holdng the clutch? cause when i tried i was in second gear and pulled the clutch in when i turned off the bike when driving
Does your hand stay on the throttle while doing this?
Dose it work with doing it with a key if you don't have a kill switch
how much will it affect our bike?? coz i used to do this alot ... just love the bang sound on my bike😍😍
@JDMz
3 жыл бұрын
Its notoriously called ignition cut. Witch basically after a while affects oil pressure. Witch will then cause ring land failure. Then boom. Your engine has shit itself
Is It luodest when you're riding the bike or when you are stop?
Nothing can happen to the engine if you abuse this? To break something in time?
does this work on a Lexmoto LSM 125?
this was the very first video of urs i watched whrn u first put it up haha
@spicy110
8 жыл бұрын
Haha been a while then! :-)
@tayohogan-bassey6652
8 жыл бұрын
+spicy110 yh 3 years of awsome content man keep it up maybe i will make it to one of ur rides one day now i have a 125 cc
I really wanna do this, but im unsure if it’s dangerous
@spicy110 Ok dude i can do it perfectly now. Omg it is hilarious and sounds awesome. Only thing is im concerned about damaging my bike, you have any idea how bad it is for it ? thanks
@spicy110 do you pull the clutch in
0:56....almost a Straight Through gearchange. Love it.... 🤣🤣🤣🤣👍👍👍👍👍👍👍
get a pipes with no collectors and it will backfire when you let go the throttle
@jxjx619
9 жыл бұрын
sorry to bother but whats a collector?
@sorrow_rr
9 жыл бұрын
Ebin :DDDDD He meant katalysator in the exhaust pipe. katalysator's job is to get some of the gases that are going out of the exhaust to go back to the machine...
@jellystick2525
5 жыл бұрын
It wont, unless your valve timings are misadjusted or the carb is running rich
@mightymaverick98
4 жыл бұрын
@@sorrow_rr *catalytic converter
@fancypotato9179
3 жыл бұрын
@@jellystick2525 most motorcycles now don’t have carbs and are fuel injected
no because mine is kickstart only as well and the momentary kill in the engine is not enough to kill it to the point that it need to be refired it will run if you unblock the connection (the kill switch) within a second or two
Is this bad for the bike?
would this work on 72cc chinese atv with custom exhaut?? :DDD
No cat delete required? Awesome! ima try this!
Hey spicey i have a 2000 wr400 and only has a push button kill switch and only kick start. no key is this still possible > would like to get some vlogs of scaring people and few more videos before start posting thanks?
can you do it with a 2 stroke ?
Did you need to use left hand clutch ?
hahaha love it!! loud and proud lol
Does this affect the engine ?
@hohohohehehe6910
2 жыл бұрын
No. Its safe. Its when unburnt fuel enters the exhaust pipe.
You can just keep it in gear and than do the killswitch right? Or do you first have to put it in neutral?
@JDMz
3 жыл бұрын
In gear. But don't do it to often. Expensive engine rebuild
This works for carb bike only I think. Because a fuel injection bike has to prime after you turn the switch back on. Also, I've been told this puts holes in the piston if you do it too often? is that true?
@MacJunior696
8 жыл бұрын
+Kimberley Hughes No, the only stress it puts is on the muffler.
Do you have to hold your clutch in cause surely if not your back wheel will lock up?
i can't seem to do this on my 15 reg grom its got a akrapovic end can but still the stock down pipe if that helps, i want to be able to backfire just for a bit of fun
@jackm4897
5 жыл бұрын
Nooo I was waiting for the grom comment jst thinking if I could do it on my grom but is it because the grom is fuel injected
When you switch it off, do you switch it back on and then pull the throttle. Or do you switch it back on whilst pulling the throttle or after?
@JDMz
3 жыл бұрын
Just switch it on. Rpm has to be high though. But don't over do it. Its expensive engine rebuild once you blow the motor
Would this work if you turned the ignition off?
possible on 50 cc 4 stroke?
+Spicy110 did you use the the clutch to keep the bike from locking up? Did you just hit the kill switch and turn it back on right after cuz i really couldn't tell in the video
@narpgt7584
5 жыл бұрын
he didn't used the clutch... yeah ... i use to do the same and it works... while riding at high speed ..i use kill switch and rev and turn it back asap and there's a bang sound... like a gunshot 😁
@JDMz
3 жыл бұрын
Use the clutch. Turn the bike off in gear and see what happens lol
I have a 92 FZR 1000 Exup and I did it a couple of times worked pretty good
It works 😂 even on my factory standard exhaust..
my bike just does a light burble when i hit the kill switch and then goes on as normal no backfire
@TimbeMovies maybe depends what it is!
Just out of curiosity, does this also work with quad bikes? Like can I be rolling at speed, hit the engine run button off, blip the throttle, turn the engine back on and BOOM? Or is it safer to just rev it in neutral until it pops because that works too...?
@spicy110
2 жыл бұрын
It's best not to tbh, however this will work on any engine that uses a Carburettor. This will not work on fuel injected engines. The meteoth is as described in the video. Your risk do not advise haha but can be funny
@ajj241
Жыл бұрын
@@spicy110does it work on 2strokes?
can this be done with a 50cc 2t?????? please anwer!
Can you do this with Yamaha mt 125 akrapovic? 2017 btw and if not does it do it without db killer
@bigboydinosaur8422
3 жыл бұрын
i know im late but this wont work on fuel injected engines
Legend!
what about this video again on derek ;)
is this going to work on carb or fi or both?
It's actually an afterlife. Backfire occurs by intake which is really bad , after fire occurs by exhaust which isn't good for bike either but not as damaging
@spicy110
Жыл бұрын
Yer in the UK the terminology is interchangeable to the layman.
Do another one of these on the Sinnis? :)
Do you hold clutch in?
Isn't that after fire, back goes back into intake
does this work on 2-strokes? and will it do any damage on 2t?
@juice-box240
9 ай бұрын
yeah it works but u have to have very high revs and rapidly turn the killswitch on and off, it really doesnt cause damage because theres no valves, as long as you dont do it for too long, u probably dont need this info anymore but yeah
@spicy110 is it safe to do as I got a 125 in December, I wanna do it but scared it’ll bust it
@spicy110
4 ай бұрын
This will only work on older bikes with a carburettor, not EFI. Will it damage it? maybe, could blow the exhaust welds, could damage the valves.
Found out that if I just hold the throttle as is and flick it fast then it works.
is it bad for the bike to backfire it like that?
Works on scooter/moped?
It works twice but after that they doesn't work. Can I know, on what gear do u use?
@JDMz
3 жыл бұрын
I don't see why you need to do it alot. Not unless you want an expensive top end rebuild lol
this is going to be one of my shortest videos ever 10 months later beats record by 51 seconds
i learnt something new today :)
Yes how ever my childish side is about 95% of me! lol
@spicy110 Ill give it another go tomorrow and oh yea the exhaust may make a difference. cheers anyway !
does this hurt the engine ??
You could also just rev and hit the start at the same time on some bikes
@kawasjt
6 жыл бұрын
no the engine needs to run on compression
Can you do this on 150cc SOHC engine single cyclinder? my bike is the new FZ150i 2013, can i make this happen m8? im gunna secaryd da shit meny ppl m8.
Ah my bike does that on its own, i accelerate in 2. Until 60-70kph, let go, at around 40-50kph ot will make a ground shaking (not exaggerating) boom. And the best part is, the police cant hold you accountable for it since its 100% stock. I even have it limited to 34ps instead of 50
I'm doing it in ybrg 125 cc with freeflow exhaust. Kindly guide if it's harmful for engine or not?
@spicy110
Жыл бұрын
If i's a injected bike it won't work just be aware of that and It's not good for it lol but that is kinda obvious. Most likely thing is your exshuat would blow welds.
@hamza-or3gb
Жыл бұрын
@@spicy110 na i have carb bike
Does it hurt anything?
Here's the general rule of thumb with 2t's. If it broke, you weren't riding it hard enough! If you hurt it, you STILL weren't riding hard enough! If you're winning, you're almost riding hard enough. If you hurt yourself, you're riding hard enough. Joking aside backfiring is like farting while you're pooping, it's just a funny and loud surprise. Also, I wouldn't worry too much about hurting a 2t. They were meant to be ran hard and are insanely cheap to fix.
you turn it off for a second or 2! when you turn in back on! bang!
@dragoshuen
4 жыл бұрын
Do you use move the throttle anymore or do you let it go
@UraSausauge
4 жыл бұрын
@@dragoshuen 7 years ago
@MrPotatoAdrian
4 жыл бұрын
@@UraSausauge way to not answer the question
@jackspedicys2805
3 жыл бұрын
@@MrPotatoAdrian yeah, maybe he got shot or hes in jail
Does that hurt the bike ?
excellent man
Does this work on every bike?
So you just kill it and turn it back on fast?
whats has that got to do with a kill switch?
So you just flip it on and off real quick!
would this damage the bike
Alex Barnes cdi? I thought that meant compressed deasil injection
yes it is bad for any vehicle , it can split exhaust seams , but the fun aspect is undeniable !!
@JDMz
3 жыл бұрын
It can more damage than that. It can play havoc on oil pressure and cause ring land failure
@iZai53
3 жыл бұрын
@@JDMz why do you keep saying this?
Wait.... how did you do that?
Does it hurt your motorbike?
I didn't get it, for ex: I'm riding around passing gears, then i throttle up to raise the revs , then i turn off and emiatly on the kill switch while throttle on the same time?
@JDMz
3 жыл бұрын
Top tip. Dont do it. Expensive engine rebuild