Can I puts in vacuum?

@jackemled

7 жыл бұрын

+Cody'sLab Yes, but it will make the Tesla Coil mad.

@hangulka

7 жыл бұрын

Cody'sLab Cody!! you're here! hi there. :)

@hangulka

7 жыл бұрын

Cody'sLab will it produce x-rays?

@KeystoneScience

7 жыл бұрын

+Cody'sLab haha hey Cody! And sure why not :D

@mistirion4929

7 жыл бұрын

youre Video is awesome can you please send me a list of the components of the circuit? i know you said it in the Video but i want to build it by myself and i've already have made a secondary coil but i Need the right components to make it good (if you can send me some that can handle like 10-20 Watts?) It would be a pleasure for me :)

I went into video thinking I could do this and then realized you need to be smart to do this. Rip

@allylilith5605

7 жыл бұрын

Braelin Love yeah i thought aswell that you just stick two wires in a potato and boom you have a musical tesla coil:/

@chopstick8974

6 жыл бұрын

lol same im not this smart

@majorboss4098

6 жыл бұрын

Braelin Love lol same

@stuarthaddox2585

6 жыл бұрын

Y'all can do it, you just need to print out a schematic so you can build it thoroughly and slowly. Also, take some free time to read and learn about some basics of electrical circuit components and physics. Two years ago I didn't know the difference between AC and DC power, and now I've successfully built some pretty powerful solid state tesla coils. If you don't let technical jargon intimidate you, you can absolutely learn how to do this and why it works. Tesla coils may not have real world applications, but building your own is education gold. You also learn to persevere because you'll likely fail a lot, like I did.

@lowlyworm8510

5 жыл бұрын

Yeah, simple electrical physics should help you understand the technical jargon

You can make the plasma speaker louder by placing a 45 degree, 3 inch PVC elbow over the end of the coil. It directs the sound better and also increases the low frequency response. Good job on this project!

@ankanpradhan9724

Жыл бұрын

It ruins the plasma show

Really love how you went into greater detail with this build. Awesome stuff!

**puts in yard,hears a scream at 2 am,me c:** thanks for the house defense devise

I'm using an AC/DC Adaptor because "I WANT TO ROCK!!!!"

did he just said zopefully??at 0:22

@themagicillusions

7 жыл бұрын

So hopefully

@AbhishekSharma-mf3do

7 жыл бұрын

~•~•}

@nabzim

7 жыл бұрын

oh my god, your right... Im so glad you noticed that, because it was hilarious.

@troywinters8208

7 жыл бұрын

0:04 musical testicle?

@daniellevin5916

7 жыл бұрын

it's tesla coil

Congratulations for 100k ! Can't wait what you're going to do in future with this channel.

100k subs!!! congrats mate you deserve it. one of thebest channels out there

Congrats on 100k. You deserve it.

@combycat

Ай бұрын

And you, congrats on 50k :D

Im to dumb to for this to understand :) *sits in front of his computer screen eating chips* :D

@lowlyworm8510

5 жыл бұрын

Basically he assembled the first board with a bunch of wires that just link all the electrical things together, the big coil thing helps make the sound for the tesla coil, and the little purple discharge is plasma like lightning but super super tiny and a lil different

@Sharvil-lr1ff

Жыл бұрын

Actually that board makes it easier to understand

Congrats on 100k! You blew right past me in no time!

@KeystoneScience

7 жыл бұрын

+Proto G thanks Proto!!

Congrats on reaching 100k!!

you explain everything much easier than great scott

I understood absolutely none of this

I love your content so much! Thank you for being awesome!

Congratulations on your success! Thanks for all you are doing! Your uncle Rob is proud of you! 100,000+!!!

@KeystoneScience

7 жыл бұрын

+Rob Clegg thanks!! :D

Awesome! You were recommended by the backyard scientist, and I see Cody found you too! Great video, now I want to make one

Woah! Congrats on 100,000!

@KeystoneScience

7 жыл бұрын

Thanks man!! :D

your videos are a treat. mesmerizing how you craft your projects together.

@KeystoneScience

7 жыл бұрын

+uckBay Nguyen thank you! :)

congrats on 100k

congratulations for your 0.1 M Subs !!!!! you're a genius

Dude you are....AWESOME !!!!!!!!!

AMAZINGLY AWESOME!!!!!!

Love the video's man!

you are absolutely amazing!!!

me encanta amigo eres un genio sigue asi

100k subs!!!!!!!!! well done you deserve it👍

premature congratulations to 100,000 subs!!

What about some destructive testing? E.g. compare a fully charged shortened Lithium ion battery to an empty Li-ion battery.

this guys a friggin genius...

You just hit 100k wooo

Drinking game: Every time he says "and so" you take a shot.

@werk62

7 жыл бұрын

Uncle Kaboom No thanks, I prefer not to abuse my liver like that lol

What are the models of the transistor and MOSFET?

What were the transistors that you used. I was unable to figure out the first one. But I know that the second one is a ST BD24 3C. And thanks for the Tesla Coil video.

Fantastic ! Great explanation and layout. Subbed!!

@KeystoneScience

7 жыл бұрын

+Rocco Croce thank you!

@roccocroce

7 жыл бұрын

+Keystone Science yeah man! There's no BS or time wasting to your videos. It's intellectual DIY porn for sure. Thanks for the content. I look forward to more material!

could you switch out the mosfet with a high current transistor

100k subs!!!!

@KeystoneScience

7 жыл бұрын

:D !!!

i love this channel

Nice videos.Slayer exciters are usually fussy about which leds you use.Have you tried different types of LEDs or have you only tried with the LEDs which came with the eBay kit?Thx

Hello Keystone Science, I really like your videos as they're informative and creatively entertaining. I'm interested in figuring out how to understand components and circuitry and wondered if you have any useful resources related to learning more about components and how they interact with each other as I am looking to figure out how to not only better understand the makeup of circuitry but also how to troubleshoot issues when they arise (eg: component testing and diagnostics). My primary interaction with circuitry in general is as a PC Troubleshooter and diagnostician mostly focusing in software and general hardware failure but feel that a deeper understanding of electrical components would greatly broaden my capabilities and proffer a broader scope of usefulness in my field. Thanks for any time you give, and thanks for the cool videos. Cheers!

@justryingmybest

2 жыл бұрын

I know this is grave posting, but I hope you are doing well and that you have learned much in terms of electronics components! I think reddit is the better platform for questions and discussions like this

what is the transistors type and are you connecting your phone to it?

awesome,nice arc

Hey, I am confused at 2:21 What mosfet did you use? I can't immediately tell what transistor that is, and you never mentioned what transistor that is either.

congrats for 100K subscribers

Where can the schematic be found?

This is cool 🤩

Would this work with any input signal with arbitrary frequency via function generator? essentially amplifying the function generator signal

can the mosfet be substituted with a BJT signal transistor (like a 2n2222)?

Youre the best

nice job

You should do a musical ZVS driver that would be and a class a amplifier

What exact types are those tranzistors? And what's their multiplication ratio?

won't be more efficent an "half bridge" inverter to controll the primary coil of the trasformer? I think the flyback is a good circuit to start with, but keep in mind just for starting ;) by the way good project!

What is the point of the LEDs in this schematic? Are they simply being used to show an off or on state, or are they being used as diodes? I'm wondering if I can omit them and simply make the connections where they are.

@sagarramchandani3139

7 жыл бұрын

am thinking they act like diodes, either way using diodes or led's will be safer.

oh wow. i think i started watching when you were under 5k subscribers O.o Nice job!

lol both that schematic and that 2nd coil seem very reminiscent of the musical tesla coil kit u can buy off ebay :P

Subbed! :) But i have a question. Can i use my phone for the audio in?

Can i make it in large scale ? What will be the safty measures and other add ups to the circuit

In future will you be making a larger scale musical tesla coil, with similar sizing to the one you always have in your background?

Can i use any kind of transistor and mosfet to build this thing??

nice and good work congratulations

Nice fountain pen

you should do a video about how to build a small particle accelerator (with magnets).

nice 100k!

what does the capacitor parallel with the transistor does? the other one is dc filter right ?

I was just high school when I first saw this video, I don't understand anything on the schematic diagram lol, now that I'm in college this circuit is actually simple to understand

nice video! have you ever thought of making any vacuum tube videos?

I like your pilot metropolitan, I'm getting one today.

he is the only guy i know who uses a fountain pen

When you wind the copper for the main coil, does it have to be one single peice? Or can i twist 2 pieces together to continue the length of copper? -your friendly aerospace enginneer

hey, +KeystoneScience is it okay if I use enamelled aluminium instead of copper for the secondary? 37 AWG 1300 turns? (for a slayer exciter, non musical)

@KeystonScience i need your help, i want to do a bigger musical Tesla coil, with bigger arcs and with 15Kv but I'm not sure of the diagram, and I don't know what resistance and capacitor i need to use for the project. Can you help me please? :)

do you have a link with a manuel text discription of these steps ? :) and names or links for all the parts needed where really cool

awesome pilot metropolitan!

I plan on using an AC/DC too, but can I play music by other bands with my coil?

This is sweet and cool

Why did you use parallel resistors with much difference 10k and 2k why please explain bro! i think it will be 1.few k ohms ?

Can you do a “Variable output DC power supply” video?

Could you make a video on how to create a static electricity motor that is powered by atmospheric energy perhaps?

Ur great...

are there any more troubleshooting steps cause i ahve been stuck building this for the past week and cant get it to work

I have a theory, what if you used a full range audio amplifier such as a Brazillian made that has a 250v output voltage into a modified Mot with a 1 ohm primary and use the 5kv output from the secondary coil for firing the primary on the tesla coil itself? Theoretically would that work for building a musical tesla?

I always had an idea of an emp gun💯🤯😎

seen my transistors get extremley hot (even with 3x4cm heatsinks) should I add a fan?

@KeystoneScience

7 жыл бұрын

+EDG yeah probably

can i increase the size of the coil but using the same circuit... please reply

Can you use a 2.2kilo ohm resistor instead of the 2kilo ohm

I bought a tesla coil kit, but it doesn't produce any sound even though i plugged my phone in and have it playing some music, are there any methods to tune up the frequency so I could hear the music?

which two transistors you used

Which transistor should I use ?

which mosfed did you used

Are Tesla coils really the miracle power solution? I hope so. I just want something that looks cool.

Hey, I really need some help with the circuit, I have connected everything up properly, but there are no sparks coming out, and the LED connected to the secondary will not light up. I am using an IRFP250 mosfet, with a 2SC3320 transistor.

@ender_coder2007

7 жыл бұрын

Yo have you found a fix for it?

Which component should be use

i clearly understand

if you want to run this circuit on just Irfp260n and transistor then how can we use it because in this circuit you have used two transistors

you should build teslas flying saucer

What for camera are you using?

Oh i tried to build it but its not working. I wound bigger coil than yours(20 cm X 5 cm), i am using irfp250n as my mosfet and same transistor as you. I couldnt find ceramic capacitor so im using same value polyestern cap. i tried switching primary connections but still nothing. I placed 50 kohm pot in place of that resistor and tried a bunch of different resistances but still nothing. I am using computer power supplie to power it, although when i connect it the led that is connected the the bottom of coil starts to glow for some reason. It even glows when + is not connected only -. Could you help me? i doublechecked every conection dont really know what to do

Two questions: I have a couple of spare power transistors so.. what needs to be done to replace the mosfet? Why don't you play a super popular song to hear how it sounds like? Why? Edit: good vid btw!! Thank you!